Search results

  1. sunny0101786

    Review: 4MP IR Bullet WizMind IPC-B74IR-Z4-AI (EmpireTech) Strong IR & Excellent LPR Performance

  2. sunny0101786

    Review: 4MP IR Bullet WizMind IPC-B74IR-Z4-AI (EmpireTech) Strong IR & Excellent LPR Performance

    I bought this camera from Andy at EmpireTech, who I first discovered on this forum about 8 years ago. He was highly recommended by the members here, and since then, I’ve purchased over 10 cameras and an NVR from him. Shipping has always been quick usually same or next day, and delivery within...
  3. sunny0101786

    New Bullet Camera Installation Issue, Stiff Base Adjustment

  4. sunny0101786

    NVR608RH-32-XI Dropping Frames in Continuous Recording. Need Help to Fix This Issue.

    How can I play back the footage recorded on the camera’s SD card directly from my NVR?
  5. sunny0101786

    NVR608RH-32-XI Dropping Frames in Continuous Recording. Need Help to Fix This Issue.

    For snapshots under the schedule, should I select General & Intelligent or just Intelligent? Also, when I play back footage under Search, I always have to uncheck the AI Rule box to remove the AI rule lines from the screen. How can I disable them permanently, but still have the option to enable...
  6. sunny0101786

    NVR608RH-32-XI Dropping Frames in Continuous Recording. Need Help to Fix This Issue.

    All the recordings worked flawlessly with the general settings, with everything else turned off. No frames missing. I’ll move camera by camera to make additional settings after confirming that everything works correctly to see what and where affects the recording process.
  7. sunny0101786

    NVR608RH-32-XI Dropping Frames in Continuous Recording. Need Help to Fix This Issue.

    I created the RAID after when I detected this issue but I’ll change that again this afternoon. Its 4:15 am and going to sleep now. I’ll check back the footage when I wake up. Only normal recording is enabled nothing else on NVR side.
  8. sunny0101786

    NVR608RH-32-XI Dropping Frames in Continuous Recording. Need Help to Fix This Issue.

    IVS on camera and face detection on NVR side. Now I have turned off everything on my NVR including disabled recording intelligent alerts on NVR side in storage-schedule. Only normal recording is enabled. I’ll see how it goes.
  9. sunny0101786

    NVR608RH-32-XI Dropping Frames in Continuous Recording. Need Help to Fix This Issue.

  10. sunny0101786

    NVR608RH-32-XI Dropping Frames in Continuous Recording. Need Help to Fix This Issue.

  11. sunny0101786

    NVR608RH-32-XI Dropping Frames in Continuous Recording. Need Help to Fix This Issue.

    Camera has no mic but I can hear some sort of noise attached to the video footage. I don’t get that on board sd card footage.
  12. sunny0101786

    NVR608RH-32-XI Dropping Frames in Continuous Recording. Need Help to Fix This Issue.

  13. sunny0101786

    New Bullet Camera Installation Issue, Stiff Base Adjustment

    There are no street lamps or external IR in that area, and I have two 12MP cameras installed at the front for wider coverage. However, their IR light is focused too far to cover that particular spot. Basically, it remains a dark area because of the surrounding trees. Some light from my other...
  14. sunny0101786

    New Bullet Camera Installation Issue, Stiff Base Adjustment

    That is the max bitrate shows in the drop down menu.
  15. sunny0101786

    NVR608RH-32-XI Dropping Frames in Continuous Recording. Need Help to Fix This Issue.

    I’m on my work presently, once I get home I’ll upload the clip.
  16. sunny0101786

    NVR608RH-32-XI Dropping Frames in Continuous Recording. Need Help to Fix This Issue.

    I noticed this issue when I tried to play directly from the NVR to the monitor using 8K-rated HDMI cable. Haven’t tried different cable. Live feed looks normal. Accessing the recorded footage from NVR on remote computer or on phone not much of fun, i found it bit of slower process and harder to...
  17. sunny0101786

    NVR608RH-32-XI Dropping Frames in Continuous Recording. Need Help to Fix This Issue.

    I’m having an issue with my Wizmind NVR where it misses frames during continuous recording. I’ve tested different frame rate settings on the camera (20, 25, and 30 fps), but the problem still occurs. Installed 4 × 4TB Seagate SkyHawk Surveillance HDDs. Configured all 4 drives in RAID 0 to take...
  18. sunny0101786

    New Bullet Camera Installation Issue, Stiff Base Adjustment

    Camera Settings (Night Mode) Exposure Settings: Anti-flicker: Outdoor Mode: Manual Shutter: Custom (0 – 1 ms) Gain: 0 – 40 (0–100) Iris: +38 Exposure: +50 3D NR: Enabled 3D NR Level: +50 2D NR Level: +50 Image Settings: Style: Standard Brightness: +58 Contrast: +72 Saturation: +50 Sharpness...
  19. sunny0101786

    New Bullet Camera Installation Issue, Stiff Base Adjustment

  20. sunny0101786

    New Bullet Camera Installation Issue, Stiff Base Adjustment

    55’-60’ distance, full zoom & installed 8’ high. I bought this camera from Andy EmpireTech IPC-B74IR-Z4-AI 1/1.8" CMOS 4MP 8mm–32mm vari-focal IR ANPR
  21. sunny0101786

    New Bullet Camera Installation Issue, Stiff Base Adjustment

    hfw7442h-z4-x
  22. sunny0101786

    New Bullet Camera Installation Issue, Stiff Base Adjustment

  23. sunny0101786

    New Bullet Camera Installation Issue, Stiff Base Adjustment

    I tried to install a new bullet camera and I noticed that if I keep the marker notch (the indicator meant to stay on the top side) facing up, the view angle points to the opposite side of where the camera can tilt. I tried twisting the base part, which makes a clicking noise when we spin it but...
  24. sunny0101786

    Seeking advice or guidance on the best way to achieve WizMind series NVR32CH-8XI setup without altering camera settings.

    As we discussed earlier in this thread AI by camera only gives the options like Tripwire or face detection, so I had to rely on the NVR side to get face detection working.
  25. sunny0101786

    Seeking advice or guidance on the best way to achieve WizMind series NVR32CH-8XI setup without altering camera settings.

    So it means when AI is enabled, the processing power available to the NVR drops significantly, and it can only handle 2 channels of 12MP @ 30fps. That makes sense now.
  26. sunny0101786

    Seeking advice or guidance on the best way to achieve WizMind series NVR32CH-8XI setup without altering camera settings.

    Just figured out why it wasn’t letting me enable face detection on the third camera. I had it running on one 12MP camera and one 8MP camera. As soon as I tried adding it to my second 12MP camera, the NVR automatically switched that camera to sub-stream and disabled the main stream in order to...
  27. sunny0101786

    Seeking advice or guidance on the best way to achieve WizMind series NVR32CH-8XI setup without altering camera settings.

    I’ve managed to get the face detection feature working on my NVR setup for 2 cameras under AI by Recorder. However, I can’t figure out why it doesn’t allow me to enable face detection for a 3rd camera, even though the Dahua WizMind series is supposed to support up to 4 channels of face detection.
  28. sunny0101786

    Seeking advice or guidance on the best way to achieve WizMind series NVR32CH-8XI setup without altering camera settings.

    I finally got my Tripwire and Intrusion IVS rules sorted out the cameras are now handling those directly and recording to the NVR and I’ve learned how to keep the NVR from overriding the camera’s picture settings or other options. Now my next question: Since all my cameras already have...
  29. sunny0101786

    Seeking advice or guidance on the best way to achieve WizMind series NVR32CH-8XI setup without altering camera settings.

    Ok, the question is how do I record those tripwire recordings to NVR and keep them on sd card as well? While playing with those settings I’m having trouble with my camera image settings when testing IVS rules through the NVR. Whenever I test under the AI menu on the NVR, my camera’s image...
  30. sunny0101786

    Seeking advice or guidance on the best way to achieve WizMind series NVR32CH-8XI setup without altering camera settings.

    Is it possible to use AI by Camera to record Tripwire alerts to both the camera’s SD card and the NVR, while at the same time using AI by Recorder for a different function like Face Detection on same camera channel?
Top Bottom