Recent content by Usafexplorer

  1. U

    Lorex NVR to fit EmpireTech PTZ

    Every other Dahua or similar camera we have installed have not had an IR filter, we have emitters in our barn and they work well.
  2. U

    Lorex NVR to fit EmpireTech PTZ

    Not yet, I don't have a good source for 110v in proximity of this camera. I might add one in the future but it's a low priority.
  3. U

    Lorex NVR to fit EmpireTech PTZ

    That is the only camera in the area, no IR light. I have used IR emitters with other cameras lacking night vision and those work well in these situations.
  4. U

    Lorex NVR to fit EmpireTech PTZ

    This particular camera is by itself at the bottom of our driveway, zero ambient lighting in the vicinity. It does work well when vehicle headlights enter the camera view, but it is only a momentary glimpse of lighting.
  5. U

    Lorex NVR to fit EmpireTech PTZ

    Camera works great for daytime viewing, oddly enough it has zero night vision. I thought Starlight meant night vision but apparently not. I believe Starlight improves and supports low light conditions, but is not an actual LED supported night vision, just a guess though. I don't have any...
  6. U

    Lorex NVR to fit EmpireTech PTZ

    I already have a Lorex NVR at another property and would prefer to use the Lorex App, if possible. Just comfortable with what I know, not opposed to using an OEM Dahua NVR if that ends up being the solution.
  7. U

    Lorex NVR to fit EmpireTech PTZ

    Recently ordered a EmpireTech PTZ2M-4X 1/2.8" CMOS 2MP 4x Starlight 2.8mm–12mm Vari-focal PTZ Camera. I have used other Dahua branded cameras successfully with a Lorex NVR but was told not all Lorex NVR's play nice. Anyone have any suggestions was Lorex NVR will work with these cameras? I...
  8. U

    Web based viewing - Live View

    I'm hesitant to post this as I fear there was something I failed to read or maybe I'm just oblivious.... I've read the Dahua/Lorex software will be updated in 2022 but has something changed where it isn't working lately? The Live View I previously used with IE no longer works, I downloaded the...
  9. U

    IPC-T5442TM-AS Can't get it to work with Lorex NVR

    "Have you tried using the IE button to login to the camera?" The IE button doesn't connect if the camera doesn't seem to initialize I tried something different and went back to plugging both cameras that won't initialize into the switch and using the ConfigTool, it worked, at least for now...
  10. U

    IPC-T5442TM-AS Can't get it to work with Lorex NVR

    Frustrating to say the least.... Still won't initialize.
  11. U

    IPC-T5442TM-AS Can't get it to work with Lorex NVR

    Ok, that makes sense since its plugged into the NVR directly. It doesn't show on the lower pane of the Setup pane, when I try to Initialize it I get an error message "The IP address and default are not in the same section!" so there is no way to use the blue IE web browse link. I'm clearly...
  12. U

    IPC-T5442TM-AS Can't get it to work with Lorex NVR

    Tries resetting one of the cameras using the manual button on the camera, plugged into NVR and attempted to connect using the 192.168.1.108 and nothing, it doesn't connect?? Any suggestions? *There are no other cameras/devices on the .108 address, I performed an IP scan to be sure
  13. U

    IPC-T5442TM-AS Can't get it to work with Lorex NVR

    Thanks for the replies, this helps joggle my memory the last time I added a Dahua camera. Two questions 1- when you say you “reset” the NVR, what exactly did you do? Just reset through the Menu, not a factory reset 2- do you want the camera to be attached to the external switch or the NVR PoE...
  14. U

    IPC-T5442TM-AS Can't get it to work with Lorex NVR

    Update After initializing through the ConfigTool using the switch, I removed it from the switch and plugged directly into port on NVR and now it works.....weird as I'm not what went wrong and why the NVR wouldn't initialize and complete on its own. I reset the NVR and same thing, no connection...
  15. U

    IPC-T5442TM-AS Can't get it to work with Lorex NVR

    Picked up a couple IPC-T5442TM-AS cams from EmpireTecAndy and I'm having issues getting it work with the Lorex NVR, I've bought cams before from Andy and never had any issues. At first, when the cam was directly plugged directly into the NVR the ConfigTool could not see the camera on the...
See more
Top Bottom