Recent content by Rapido
-
All my 3 IP2M-841B-V3 stopped recording
Thank you for your ideas. DST time change is on the last Sunday in March here, so next sunday. I checked the time anyway and the cams and the NAS are running the same time. -
All my 3 IP2M-841B-V3 stopped recording
I noticed this morning, that all my 3 IP2M-841B-V3 stopped recording at the beginning of March within a period of about one week. They all upload pictures and videos via ftp to my NAS. That used to work reliably for years. I gave each cam a reboot and meanwhile each cam has created a folder... -
Amcrest 841 V1 or V2 new 2024 Firmware
There is also new FW for V3. I installed it on my 3 IP2M-841B-V3 w/o problems. -
Amcrest dies after switching to IR?
Late reply ... but do you have a micro SD card in that cam? I had similar problems an it turned out that it was by a corrupt SD card. Once removed, camera was fine. -
ip2m-841ew alternative
Not what you asked for but ...: Three years ago I replaced my no longer supported Hootoo Cams with three Amcrest IP2M-841-V3. I use the Onvier App for occasional live view and ftp clips to the NAS when motion is detected. Retrieving the clips is cumbersome and takes time. Then on Amazon Prime... -
Viofo Bluetooth Remote Control working unreliably
Viofo support provided to me Firmware V 1.1_240411 and since then I had no more problem with the remote control. -
Viofo Bluetooth Remote Control working unreliably
The VIOFO Bluetooth Remote Control is an accessory for the VS1 and works - as the name already says - via Bluetooth. -
Viofo Bluetooth Remote Control working unreliably
@patrocle I don't understand your suggestion. The remote control button does only talk bluetooth (with the camera). -
The Typical picture of a Perp on Nextdoor-type Apps with Consumer Grade Cameras like Ring, Nest, Arlo, Canary, Wyze, etc.
Didn't he lose the front plate during impact?- Rapido
- Post #707
- Forum: Pics & Videos
-
Viofo Bluetooth Remote Control working unreliably
Thank you TonyR, I will give that a try. I have also contacted Viofo support. They want me to upload a video of the problem. :rolleyes: -
Viofo Bluetooth Remote Control working unreliably
I have just installed a Viofo VS1 dashcam together with the wireless Bluetooth remote control button. Bluetooth pairing of both devices worked perfectly, but the connection has funny problems. When I start the car, the button may work ... or not. I do a new pairing and it works on the first... -
PTZ no longer working for my IP2M-841-V3 from Onvier App after DST change / Firmware bug?
I have 3 Amcrest IP2M-841-V3, that I'm also using with the Onvier App. After the recent DST change, that changed the time in Germany from GMT+1 to GMT+2, the PTZ control from within the App did no longer work. The logs showed theses errors: "Wsse authorized time check failed." but as the time... -
IR Light turns on every 5 min at night (Amcrest IP2M-841-V3)
Thank you for your thoughts and answers. I brought the cam from the garage to my desk and did the following: gave it daylight --> keeps rebooting disabled "Auto Reboot" --> keeps rebooting use other PS (3,0 A) --> keeps rebooting set it to "Factory Default" --> keeps rebooting I hardly can... -
IR Light turns on every 5 min at night (Amcrest IP2M-841-V3)
Thank you, will try another PS and a factory reset as well. Cam has no internet access, so DDoS is unlikely. WiFi connection is usually sufficient, but not optimal. So I already considerd the recent solar storm to interfere here. Wild guess. -
IR Light turns on every 5 min at night (Amcrest IP2M-841-V3)
Thank you wittaj. I just remembered the camera log and found out while looking it up, that the cam is periodically rebooting, thereby obviously turning the light on/off. So what might make it reboot over and over again? Poor power supply?