Search results
-
All my 3 IP2M-841B-V3 stopped recording
Thank you for your ideas. DST time change is on the last Sunday in March here, so next sunday. I checked the time anyway and the cams and the NAS are running the same time. -
All my 3 IP2M-841B-V3 stopped recording
I noticed this morning, that all my 3 IP2M-841B-V3 stopped recording at the beginning of March within a period of about one week. They all upload pictures and videos via ftp to my NAS. That used to work reliably for years. I gave each cam a reboot and meanwhile each cam has created a folder... -
Amcrest 841 V1 or V2 new 2024 Firmware
There is also new FW for V3. I installed it on my 3 IP2M-841B-V3 w/o problems. -
Amcrest dies after switching to IR?
Late reply ... but do you have a micro SD card in that cam? I had similar problems an it turned out that it was by a corrupt SD card. Once removed, camera was fine. -
ip2m-841ew alternative
Not what you asked for but ...: Three years ago I replaced my no longer supported Hootoo Cams with three Amcrest IP2M-841-V3. I use the Onvier App for occasional live view and ftp clips to the NAS when motion is detected. Retrieving the clips is cumbersome and takes time. Then on Amazon Prime... -
Viofo Bluetooth Remote Control working unreliably
Viofo support provided to me Firmware V 1.1_240411 and since then I had no more problem with the remote control. -
Viofo Bluetooth Remote Control working unreliably
The VIOFO Bluetooth Remote Control is an accessory for the VS1 and works - as the name already says - via Bluetooth. -
Viofo Bluetooth Remote Control working unreliably
@patrocle I don't understand your suggestion. The remote control button does only talk bluetooth (with the camera). -
The Typical picture of a Perp on Nextdoor-type Apps with Consumer Grade Cameras like Ring, Nest, Arlo, Canary, Wyze, etc.
Didn't he lose the front plate during impact?- Rapido
- Post #707
- Forum: Pics & Videos
-
Viofo Bluetooth Remote Control working unreliably
Thank you TonyR, I will give that a try. I have also contacted Viofo support. They want me to upload a video of the problem. :rolleyes: -
Viofo Bluetooth Remote Control working unreliably
I have just installed a Viofo VS1 dashcam together with the wireless Bluetooth remote control button. Bluetooth pairing of both devices worked perfectly, but the connection has funny problems. When I start the car, the button may work ... or not. I do a new pairing and it works on the first... -
PTZ no longer working for my IP2M-841-V3 from Onvier App after DST change / Firmware bug?
I have 3 Amcrest IP2M-841-V3, that I'm also using with the Onvier App. After the recent DST change, that changed the time in Germany from GMT+1 to GMT+2, the PTZ control from within the App did no longer work. The logs showed theses errors: "Wsse authorized time check failed." but as the time... -
IR Light turns on every 5 min at night (Amcrest IP2M-841-V3)
Thank you for your thoughts and answers. I brought the cam from the garage to my desk and did the following: gave it daylight --> keeps rebooting disabled "Auto Reboot" --> keeps rebooting use other PS (3,0 A) --> keeps rebooting set it to "Factory Default" --> keeps rebooting I hardly can... -
IR Light turns on every 5 min at night (Amcrest IP2M-841-V3)
Thank you, will try another PS and a factory reset as well. Cam has no internet access, so DDoS is unlikely. WiFi connection is usually sufficient, but not optimal. So I already considerd the recent solar storm to interfere here. Wild guess. -
IR Light turns on every 5 min at night (Amcrest IP2M-841-V3)
Thank you wittaj. I just remembered the camera log and found out while looking it up, that the cam is periodically rebooting, thereby obviously turning the light on/off. So what might make it reboot over and over again? Poor power supply? -
IR Light turns on every 5 min at night (Amcrest IP2M-841-V3)
I got an Amcrest IP2M-841-V3 in the garage, that at night turns on the IR light every couple of minutes. The time varies between 4 and 10 minutes about. I know this because this triggers another camera (Blink mini) to start recording a video. So every night I end up having lots of clips from... -
App recommendation
Thank you Tony. I checked Nogosoft and they write: "The (personal) Data is processed at the Owner's operating offices and in any other places where the parties involved in the processing are located. " :oops: They don't disclose, where this is, but probably China. I'm wary regarding software... -
App recommendation
Thank you. Good starting point. (fwiw, Onvier is written wrong there.) -
App recommendation
I got 3 Amcrest IP2M-841-V3, that I operate only within my private network (no internet access). With my Android phone I use the Onvier App to monitor the cams and I am very satisfied with it. Unfortunately the App is not available for iOS. Can anyone recommend an equivalent free... -
favicon.ico for Amcrest IP2M-841-V3
Thank you Gary. Favicon Changer for Edge did the trick. :thumb: -
favicon.ico for Amcrest IP2M-841-V3
Is there a way to place the file favicon.ico in the main directory of my Amcrest cam IP2M-841-V3 (ftp or such?), so that the image would show up in the browser tabs and next to the favorites? -
Amcrest IP2M-841-V3 AP Roaming
Thanks for your suggestions. :thumb: I'm using Onvier on my mobile phone to check the cams. I think it would fail when that garage cam would have another network. I have created a shortcut to reboot the cam (192.168.178.222/cgi-bin/magicBox.cgi?action=reboot ) when I notice, that the cam has... -
Amcrest IP2M-841-V3 AP Roaming
Thank you Tony. Yes, that's the prereq for a mesh network. Two different SSIDs result in two different networks, making it harder to manage the cams. -
Amcrest IP2M-841-V3 AP Roaming
Although there is a close repeater (mesh network) my IP2M-841-V3 sometimes prefers to connect directly to the router and the connection then is worse as it would be with the repeater. I can't see that the cam supports Access Point Roaming. Question to Amcrest Support: Is there any chance that... -
IP2M-841-V3, modify for external aerial
I tried ... but finally gave up on it as it became too hot and the effort seemed not worthwhile in the end. The WiFi circuit is in the cam head, the antenna can be seen on the 1st picture (silver piece of bent sheet metal). -
IP2M-841-V3, modify for external aerial
Hi Tony, thanks for your reply and the tips. I've done surgery on this cam before (IP2M-841B-V3: tilt is stiff and jerky) and I've also done that aerial modification on my previous HooToo HT-IP211HDP cams successfully. There it was obvious where to connect the pigtail and I was wondering, if it... -
IP2M-841-V3, modify for external aerial
My IP2M-841-V3 is located in the garage and the wifi-connection is critical. Im considering to modify the cam with (a connector for) an external aerial to improve the connectivity. Before I do my surgery I wanted to ask if anybody has done that already and may share some tips and experience? -
Why are IR-Leds switched with Relay?
Ahh, interesting. Thank you. Fastes answer ever. :) -
Why are IR-Leds switched with Relay?
I had various cams now (Hootoo, Amcest, Blink). Every time the IR-Leds are activated on any of them I hear a "click", indicating that the leds are switched by means of a relay. Why is that and why don't they switch silently with a semiconductor? -
Firmware updates but no change logs
All the firmware updates on this page (Firmware Upgrade | Amcrest Technologies ) come without any change log. What is the point in offering something without any description? Is this :secret:? How should I decide to take it or not? :confused: This is like selling mysterious pills without any...