Recent content by observant1

KOLSOL AT278 NF-8601S is a good test meter. It has TDR functions - tells you the length of your cable, can requst an ip address when looking toward the router/switch...can do a port flash so you know what switch port your plugged into.....can tell you the poe voltage supplied and on what...

This ptz was painted by the customer so the waranty is void. They purchased a higher end replacement. I had 2nd thoughts after it went into the dumpster, pulled it out and brought it home.

I could never replace the chip. It's surface mount so the pins do not pass thru to the other side. The wires are good from the rj45 to the white connector, so it may be worth trying to buy the 48v power board ...

dahua DHI-VTO2311R-WP that has poe and wifi connection capabilities. The poe port to connect it directly to the nvr. No VTH/monitor. I think you can program it to use the poe port and the wifi at the same time....not sure. It "i think" can also be used like a doorbell to ring an existing...

Liked my last avatar better.

Is the manufacturer working with you to replace an electronic ckt board that has become inoperative? They seem to be doing more than some. Is the camera past the 18 mo warranty? I looked at the manufacturer and their prices are really low compared to some others and I sometimes wonder if an 18...

Pic's look ;ike shit....so the board sells for about 60 dollars. The PTZ is not top of the line.. Model: PDN49I425H-XR .......but worth 60.00 i think. No way to know for sure this board will fix it. ---worth my time or put it back in the dumpster?

Upside down, damn't..... But you get the picture. The camera doesnt work. Pins 12, 36 show open towards the camera. It's a ptz camera but all poe cameras look the same on this meter. It's DOA, will not power up via poe. It will power up via the 12v connector but has no activity on the test...

This is looking at the camera. Pic is better - Normal -

picture is better....

Without knowing your power setup you may try a 12 adaptor with a higher amperage rating as close to the camera as possible.

1st time trying to upload an image here so...... This PTZ has worked very well (over 3 years) until the building got a lightening strike. Took out this PTZ and the nvr. We installed a new nvr and when we plugged in this ptz all the cameras that werte up crashed. I have a test meter that can...

The machinist that works at this location gave us a hand creating a custom mount for this PTZ