Recent content by Dreamboat

  1. D

    Hikvision playback events - Directly on NVR vs APP or ivms4200

    First update to the latest fw version located on the official website (down to recources section): DS-7616NI-I2/16P - Firmware_V4.61.030_240123, Then also update Hik-Connect mobile app. Yesterday Hikvision released mobile app that fixed playback issues (no timeline when browsing records).
  2. D

    Hikvision camera recordings cut off halfway

    For the record schedule leave it in continuous only. In event section (like motion) just check if it's enabled and triggers recording in the linkage method. That means countinous and event.
  3. D

    DS-2CD2443G2-IW-W Image rotation setting

    Yes, I see the specsheet, but I think this is rather a mistake. These cameras have no web interface for sure. If you open specsheet for every other Hik camera you'll see section "Web browser" where the you can check supported browser version and plugin requirements. There is no such section in...
  4. D

    DS-2CD2443G2-IW-W Image rotation setting

    In case your model is: DS-2CD2443G2-IW (W), then it belongs to the new generation Hikvision wireless cameras which are in fact rebranded EZVIZ cameras. They share common EZVIZ limitations like no web interface, no possiblity to change their ports, no manual firmware upgrade, etc.. As I see in...
  5. D

    HikVision Nightmare - Reset Password Failed 2022

    Couple of days ago I had the same issue (same error). It was solved by temporarily disabling antivirus software (in this case 360 total security) during the file import. Other clue: On the PC running SADP software use wired connection (instead of wi-fi). Sometimes this also helps.
  6. D

    Audio disables itself - Hikvision DS-2CD2142FWD-IS

    Are you sure the camera accepts the settings at all? For example, if you use browser for setup (IE plus properly installed ActiveX plugin), right after saving the changes (audio plus video), logoff and logon again to see if the settings are saved correctly. Alternatively you can use iVMS4200 to...
  7. D

    Audio disables itself - Hikvision DS-2CD2142FWD-IS

    Is the camera added for recording in NVR? If yes, do the setting in the NVR instead of the camera directly.
  8. D

    Live view failed when accessing IP cameras from Chrome Linux, NVR live view works.

    Normally you should use NVR for live view/playback and all the basic settings (motion detection, event settings, recording setup, etc). Virtual server option (i.e. accessing the camera web page) is intended only for a camera settings which are "hidden" for the NVR itself. Such settings are the...
  9. D

    hikvision no more camera is allowed

    No, firmware upgrade normally keeps the settings. Hard to say what's the safest way - either browser (IE) or iVMS4200. Most often I use browser.
  10. D

    hikvision no more camera is allowed

    Yes, this model supports max 2 IP cameras. Nevertheless, using the latest firmware V3.4.89 build 180906(For HGHI-F) it's possible to disable analog channel, and replace it with IP channel (for example 15 analog + 3 IP cameras).
  11. D

    Hikvision DS-7616-NI cannot find downloaded files

    Yes, that's true. But my assumption was IE is used only for accessing the cameras (just like I'm using it). Who uses nowadays IE for daily browsing... Even Microsoft hid it deep in the Win 10 menu, and claimed Edge as a main browser. According to a global researches IE takes only about 2% from...
  12. D

    Hikvision DS-7616-NI cannot find downloaded files

    If you use Internet Explorer, uncheck the option: Tools -> Internet Options -> Security -> Enable protected mode. Then reboot the browser.
  13. D

    Hikvision motion or event recording, separated!!

    Probably it's a firmware issue. What is the model number and the firmware version?
  14. D

    Hikvision motion or event recording, separated!!

    I'm not sure if the latest USA firmware has something different, but in general Hikvision works like this: - when accessing the local interface with monitor and mouse you can choose between different schedule modes like: motion only, alarm, motion or alarm, motion and alarm or event. In your...
  15. D

    can I connect many DVRs to main NVR?

    Nothing special. Just add the same way as you add IP camera. Then you will be prompted to add all the channels or select some channels from the DVR. Make sure also ports 554 are accessible from the NVR side (in case the DVRs are behind firewall/router). P.S. Sorry, I didn't see you're talking...
See more
Top Bottom