Can anyone recommend a 5 or 10x PTZ that starts at 2.8? A friend of mine wants to put 3 or 4 cameras up to watch his dogs, he doesn’t want stationary cameras. Thanks.
2.8 PTZ
- Thread starter bob2701
- Start date
looney2ns
IPCT Contributor
Your friend wants a PTZ to "follow" your dogs around automatically? Or does your friend want to manually PTZ around to catch blind spots and/or zoom in when needed?
Actually manually to look for them. Right now he has a 20 or 30x PTZ but it starts at 4.7mm and he can't see a close and wide area. He has it mounted on the barn and wants to replace it and add 2 more on each side of the barn. I tried to convince him to use fixed lens but he wants PTZ...
We have a PTZ3E10X-T180 in our shop that we still have to install into our Dahua NVR. A little under $400 via Andy.
180 degrees for the static "stitched" camera.
PTZ has 10x optical with 4mm-40mm focal length
[td width="293.594px"]Focal Length[/td]
180 degrees for the static "stitched" camera.
PTZ has 10x optical with 4mm-40mm focal length
| Overview channel: 2.8 mm; Detail channel: 4 mm–40 mm |
can look at the specs yourself: EmpireTech PTZ3E10X-T180 1/2.8" CMOS 8MP+4MP 10x Starlight TiOC Networ
and get with Andy for the order
You say it's going into your NVR, do you know if there will be problems with BI? Two separate IP addresses correct?
No problems.
It counts as two channels against an NVR and for BI it is the same IP address added twice and then in the dropdown for each camera you select the channel.