PFA150 Pole Mount Bracket question

J

JPmedia

Getting comfortable
Sep 11, 2024
894
741
Southeast
It's been a while since I mounted my PTZ cameras (just over 5 years) and I noticed a lot of rust on the bottom of the pole mount bracket. Is the PFA150 Pole Mount Bracket made from regular steel or is it aluminum like the camera housings?
 
JPmedia said:
It's been a while since I mounted my PTZ cameras (just over 5 years) and I noticed a lot of rust on the bottom of the pole mount bracket. Is the PFA150 Pole Mount Bracket made from regular steel or is it aluminum like the camera housings?
Click to expand...
Specs here say it's made of "SECC" which stands for "Steel Electrolytic Cold Commercial". IOW, it's steel, electro-galvanized with a thin zinc coating.

EDIT 7/7 @ 0558 CDT: You could wire-brush it, wipe off residue and spray with zinc-rich paint.
 
Last edited:
  • Like
Reactions: looney2ns
TonyR said:
Specs here say it's made of "SECC" which stands for "Steel Electrolytic Cold Commercial". IOW, it's steel with a electro-galvanized with a thin zinc coating.
Click to expand...
I figured it was steel but just wanted to confirm. Can't believe it got as rusty as it did in a short 5 years
 
  • Like
Reactions: TonyR
JPmedia said:
I figured it was steel but just wanted to confirm. Can't believe it got as rusty as it did in a short 5 years
Click to expand...
Yes, it's a pretty thin coat.
Check my edit above.
 
JPmedia said:
Looks bad, huh?
Click to expand...
Naw, Dahua specs are wrong...that's paint falling off plain old rusty steel and is NOT galvanized (electro-plated with zinc). :headbang:
Maybe a cheaper knock-off?
 
looney2ns said:
Your salt air is the likely culprit. Salt air= all bets are off.
I have two of those mounts that have been in use for over 6-7 years. No rust, but no salt air either.
Click to expand...
We are 14 miles away from the ocean, so it shouldn't be an issue. None of my other 2 mounts have rusted. Maybe I received a defective mount?
 
TonyR said:
Naw, Dahua specs are wrong...that's paint falling off plain old rusty steel and is NOT galvanized (electro-plated with zinc). :headbang:
Maybe a cheaper knock-off?
Click to expand...
Which is what makes me think there's an issue with how the mount was made. I can't find it in my Amazon orders, but I'm pretty sure I purchased:


Which is the same thing
 
As an Amazon Associate IPCamTalk earns from qualifying purchases.
JPmedia said:
Which is what makes me think there's an issue with how the mount was made. I can't find it in my Amazon orders, but I'm pretty sure I purchased:


Which is the same thing
Click to expand...
It says powder-coated aluminum and IMO, that ain't aluminum...looks like rust to me.:idk:

What does a magnet say?
 
As an Amazon Associate IPCamTalk earns from qualifying purchases.
Interesting......from here.


amcrest-pfa150.jpg
 
As an Amazon Associate IPCamTalk earns from qualifying purchases.
TonyR said:
It says powder-coated aluminum and IMO, that ain't aluminum...looks like rust to me.:idk:

What does a magnet say?
Click to expand...
It's definitely NOT aluminum. This item was purchased during COVID so I would bet that that has something to do with the poor quality. I need to find an alternative mount as I don't want to go through the task of climbing onto a metal roof in the future to swap it out. In 2 years, I'll be in my 60's and less willing to do so.
 
  • Like
Reactions: TonyR
I would say that the paint lifted from the metal, and it rusted. The whole bottom of the bracket the paint is peeled away from the metal. Poor prep work prior to paint, if any was done
 
You must log in or register to reply here.
Top Bottom