NEW DBpower IP CAM cannot work with Blue Iris Ver 4

C

CHESTERCHESTER

n3wb
Mar 3, 2016
2
0
I have tried many different configurations and still cannot make it work.

Using ODM ONVIF Device manager I was able to get thefollowing info from the camera:


Brand Name on camera is DBpower

Manufacturer: Happtimesoft

Model Number: IP CAM
Hardware Revision: 1.0
Firmware Revision: 2.4
Device ID: 123456
IP Address: 192.168.0.122:80
RTSP Port: 8554

ONVIF Port: 8000
ONVIF: Enabled

MAC Address: 00-15-01-28-CD-2F

ONVIF Version: 2.42

URI: http://192.168.0.122:8000/

Live Video Steam: rtsp://192.168.0.122:8554/1.3gp

Encoding and Resolution: h264 1280x720


Video Stream work correctly from Device Manager and PTZcontrol.






When Blue Iris Ver 4 Inspection is Run:



HTTP request...

OK

GetSystemDateAndTime...

HTTP 400
Opening port 8999...
GetSystemDateAndTime...
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?

Foscam FI89xx compatible?

Foscam FI9821 V2 compatible?

Foscam FI9821 media port compatible?

RTSP port open?
RTSP port detected!

Done




I setup VIDEO for Blue Iris as follows
IP Address: 192.168.0.122
Http Port: 80

RTSP Port: 8554

ONVIF Port: 8000
Type; Generic
Steam: RTSP/H264/MPG4
Tried video Steams:
/
/1.3gp
/192.168.0.122:8554/1.3gp
BUT NONE WORKED




HELP:



CANNOT GET VIDEO



Any suggestion on different settings?

 
using the tool ONVIF device manager everything works the IP CAM, so username & password are correct. When setting up with Blue Iris the error message is: RTSP: 415 UNSUPPORTED MEDIA TYPE, NO SIGNAL.
 
CHESTERCHESTER said:
using the tool ONVIF device manager everything works the IP CAM, so username & password are correct. When setting up with Blue Iris the error message is: RTSP: 415 UNSUPPORTED MEDIA TYPE, NO SIGNAL.
Click to expand...
Then you are entering the stream incorrectly. Post an image of your path..Post an actual screen shot of the configuration page.
 
You must log in or register to reply here.
Top Bottom