Hikvision does not work or react

[Alexander2024]

I was running Hikvision, but he's silent.
DS-7108HGHI-K1

SIT

MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMOFB

MLE

RBE

RESET TYPE : Power on reset
Calibration Progress    : Error Code D0074AB4
Frequency        : 1866M
Version            : B4
Calibration result    : 0xFFFF (all zero is right)
RX-window-0        : 0 (expect: 3 or  4@1866M, About  8@1066M)
RX-window-1        : 0 (expect: 3 or  4@1866M, About  8@1066M)
RX-window-2        : 0 (expect: 3 or  4@1866M, About  8@1066M)
RX-window-3        : 0 (expect: 3 or  4@1866M, About  8@1066M)
TX-window-0        : 0 (expect: 4 or  5@1866M, About  8@1066M)
TX-window-1        : 0 (expect: 4 or  5@1866M, About  8@1066M)
TX-window-2        : 0 (expect: 4 or  5@1866M, About  8@1066M)
TX-window-3        : 0 (expect: 4 or  5@1866M, About  8@1066M)
CA-window        : 0 (expect: About 9@1866M, About 10@1066M)
******************************************************************
SIT

MMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMMOFB

MLE

RBE

RESET TYPE : Power on reset
Calibration Progress    : Error Code D0074AB4
Frequency        : 1866M
Version            : B4
Calibration result    : 0xFFFF (all zero is right)
RX-window-0        : 0 (expect: 3 or  4@1866M, About  8@1066M)
RX-window-1        : 0 (expect: 3 or  4@1866M, About  8@1066M)
RX-window-2        : 0 (expect: 3 or  4@1866M, About  8@1066M)
RX-window-3        : 0 (expect: 3 or  4@1866M, About  8@1066M)
TX-window-0        : 0 (expect: 4 or  5@1866M, About  8@1066M)
TX-window-1        : 0 (expect: 4 or  5@1866M, About  8@1066M)
TX-window-2        : 0 (expect: 4 or  5@1866M, About  8@1066M)
TX-window-3        : 0 (expect: 4 or  5@1866M, About  8@1066M)
CA-window        : 0 (expect: About 9@1866M, About 10@1066M)
******************************************************************

 

[iTuneDVR]

Too few info!
Photo from mb with rev?
Dump?
What & how it happed?
What you already did?

 

[iTuneDVR]

Check hardware.
Dump ok.

 

[Alexander2024]

Check hardware.
Dump ok.

Thank you very much for your interest in my matter
I checked the electronic components and they are all in good condition
Is there any other suggestion?

 

[iTuneDVR]

In fact not all ok.
Overheating cpu or ram trouble.
Dust at mb at photo.