Camera on 2" mast

[josephny]

Does anyone know how I can mount a camera on a 2" diameter aluminum mast?

Thank you!

 

[wittaj]

Something like this:

https://www.amazon.com/EmpireTech-PFA152-E-Pole-Mount-Bracket/dp/B07DWWM9BJ/ref=sr_1_33?imprToken=eNnu.Pmf5hsW5hcTVECAQg&linkCode=w61&m=A329YQ83EBQGJF&marketplaceID=ATVPDKIKX0DER&qid=1668295470&redirect=true&s=merchant-items&slotNum=0&sr=1-33

 

[josephny]

Something like this:

https://www.amazon.com/EmpireTech-PFA152-E-Pole-Mount-Bracket/dp/B07DWWM9BJ/ref=sr_1_33?imprToken=eNnu.Pmf5hsW5hcTVECAQg&linkCode=w61&m=A329YQ83EBQGJF&marketplaceID=ATVPDKIKX0DER&qid=1668295470&redirect=true&s=merchant-items&slotNum=0&sr=1-33

That would be great, but it the specs are accurate, the minimum mast size is 3.15"

Mast Diameter

ɸ 80~1 5 0mm ɸ 3.15 ””~5.91

 

[wittaj]

Oh dang I thought it went smaller.

You could always go buy the ring at a local hardware store to fit the size you need and then replace these rings thru the bracket.

 

[VorlonFrog]

Yup, get smaller band clamps at the big box hardware store.
Or use another mount that has U-bolts. Those can be tightened down to fit any diameter.
This mount (similar to above) may work.

 

[Rob2020]

Auto parts store would also have rings like that only smaller.

 

[josephny]

Oh dang I thought it went smaller.

You could always go buy the ring at a local hardware store to fit the size you need and then replace these rings thru the bracket.

I assume you mean the hose clamp.
Good idea. Not sure if it would work but worth a shot.

Thank you!

 

[wittaj]

Yep, hose clamp escaped me for a moment LOL. I had to replace them on this bracket to make it longer.

 

[josephny]

Yep, hose clamp escaped me for a moment LOL. I had to replace them on this bracket to make it longer.

I ordered several types and will test and report back.

Thank you!