Error message in Blue Iris

J

johnneels

n3wb
Feb 26, 2019
3
1
Winfield, MO
We are attempting to move 34 Hikvision cameras from an older DVR using an older version of Hikvision software to a new server with Blue Iris.

Most of the cameras have been detected by Blue Iris and are functioning properly, however, we have a few cameras that we can ping, but will not display an image. (The camera is functioning because it is working properly on the old DVR.)

Here is a screenshot from Blue Iris of the camera and the settings used.

cameraerror.jpg camerasettings.jpg

Any suggestions to correct this issue?

Thanks in advance,

John
 
Last edited:
johnneels said:
We are attempting to move 34 Hikvision cameras from an older DVR using an older version of Hikvision software to a new server with Blue Iris.

Most of the cameras have been detected by Blue Iris and are functioning properly, however, we have a few cameras that we can ping, but will not display an image. (The camera is functioning because it is working properly on the old DVR.)

Here is a screenshot from Blue Iris of the camera and the settings used.

View attachment 39667 View attachment 39668

Any suggestions to correct this issue?

Thanks in advance,

John
Click to expand...
On cameras with newer firmware you have to activate onvif. Try using Hikvision rtsp or simply activate onvif in the camera.
 
  • Like
Reactions: Mike
fenderman said:
On cameras with newer firmware you have to activate onvif. Try using Hikvision rtsp or simply activate onvif in the camera.
Click to expand...
Here are the results when I perform a Find/Inspect of the camera. Does this information indicate onvif is activated?

Opening 10.3.0.150 port 80...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
2019-02-26T15:10:52.000Z
Requesting device information...
Manufacturer: ONVIF
Model: BA-IPVD-3MP-IR-28
FirmwareVersion: V5.3.0 build 151202
GetCapabilities...
Querying services
Has Search services: /onvif/SearchRecording
Has Imaging services: /onvif/Imaging
Has media services: /onvif/Media
Has RTP_RTSP_TCP, requesting profiles
first profile is Profile_1
first source is VideoSource_1
requesting URI for profile Profile_1
RTSP URI: /Streaming/Channels/101?transportmode=unicast&profile=Profile_1
Has Event services: /onvif/Events
Has WSPullPointSupport
RelayOutputs: 0
InputConnectors: 0
Has Device IO services: /onvif/DeviceIO
AudioOutputs: 0
Done
 
johnneels said:
Here are the results when I perform a Find/Inspect of the camera. Does this information indicate onvif is activated?

Opening 10.3.0.150 port 80...
HTTP Get / request...
OK
ONVIF GetSystemDateAndTime
2019-02-26T15:10:52.000Z
Requesting device information...
Manufacturer: ONVIF
Model: BA-IPVD-3MP-IR-28
FirmwareVersion: V5.3.0 build 151202
GetCapabilities...
Querying services
Has Search services: /onvif/SearchRecording
Has Imaging services: /onvif/Imaging
Has media services: /onvif/Media
Has RTP_RTSP_TCP, requesting profiles
first profile is Profile_1
first source is VideoSource_1
requesting URI for profile Profile_1
RTSP URI: /Streaming/Channels/101?transportmode=unicast&profile=Profile_1
Has Event services: /onvif/Events
Has WSPullPointSupport
RelayOutputs: 0
InputConnectors: 0
Has Device IO services: /onvif/DeviceIO
AudioOutputs: 0
Done
Click to expand...
just use hikvision rtsp. are you able to log into the cameras web interface from the blue iris pc?
 
You must log in or register to reply here.
Top Bottom