New 2 Ipcams

M

Mr.Key

n3wb
Mar 27, 2018
9
0
Hello, I’m new here, but this looks like the place for help. Ihave 3 Reolink 410 cameras that I’m trying to connect to blue iris software... I followed all the help on the Reolink site regarding BI... Find inspect does not setup camera it just stops and camera doesn’t show picture... Reolink client works fine, I can see cameras there and access from my cellphone. Any help with blue iris setting and these cameras will be greatly appreciated...
 
Mr.Key said:
Hello, I’m new here, but this looks like the place for help. Ihave 3 Reolink 410 cameras that I’m trying to connect to blue iris software... I followed all the help on the Reolink site regarding BI... Find inspect does not setup camera it just stops and camera doesn’t show picture... Reolink client works fine, I can see cameras there and access from my cellphone. Any help with blue iris setting and these cameras will be greatly appreciated...
Click to expand...
If you can still return the reolinks you should do so.... They are a lying scamming company.. there firmware also does not allow adjustment to the I frame interval which causes problems in Blue Iris....
Your issue of not seeing the video feed is likely related to an to an incorrect port or IP address
 
I agree with fenderman....there are much better cams for BI. I'm working on replacing mine. I have my 410s configured as shown in the attached screen shot, and it works ok...most of the time. It will randomly disconnect frequently, so make sure to set the watchdog to automatically reset the camera after a number of disconnects. It also helps to have the camera perform a self-reset at least weekly. Make sure that the 410 is configured to use the baseline profile.

Capture.PNG
 

Attachments

  • upload_2018-3-27_15-39-25.png
    upload_2018-3-27_15-39-25.png
    47.5 KB · Views: 18
  • Like
Reactions: Mr.Key and fenderman
fenderman said:
If you can still return the reolinks you should do so.... They are a lying scamming company.. there firmware also does not allow adjustment to the I frame interval which causes problems in Blue Iris....
Your issue of not seeing the video feed is likely related to an to an incorrect port or IP address
Click to expand...
Thanks for the reply! I know the reolinks have their issues, but they worked well for my needs until I wanted more options that were in BI and not in reolink client... Ive been reading a lot of these threads... Some of you guys really know your shit... Thanks for the advice...
 
DognamedTank said:
I agree with fenderman....there are much better cams for BI. I'm working on replacing mine. I have my 410s configured as shown in the attached screen shot, and it works ok...most of the time. It will randomly disconnect frequently, so make sure to set the watchdog to automatically reset the camera after a number of disconnects. It also helps to have the camera perform a self-reset at least weekly. Make sure that the 410 is configured to use the baseline profile.

View attachment 28021
Click to expand...
What Cameras are you looking to replace reolinks with? Im interested... I'm going to work on my issue a little later, I hope this works... I appreciate the help, thanks...
 
Mr.Key said:
What Cameras are you looking to replace reolinks with? Im interested... I'm going to work on my issue a little later, I hope this works... I appreciate the help, thanks...
Click to expand...

I have a 3 MP Ultra low light 2035 Hikvision that I like. I am going to get a Dahua 2 MP starlight turret to compare it with, and go with whichever I like the best to replace my 410s.
 
fenderman said:
If you can still return the reolinks you should do so.... They are a lying scamming company.. there firmware also does not allow adjustment to the I frame interval which causes problems in Blue Iris....
Your issue of not seeing the video feed is likely related to an to an incorrect port or IP address
Click to expand...
Thanks so much, got everything going but I have another question: Looking to buy a refurbished computer to dedicate to blue iris only... what computer specs should be minimum on the computer to keep my little system( 4 reolink-410’s) running as smooth as possible?
 
Mr.Key said:
Thanks so much, got everything going but I have another question: Looking to buy a refurbished computer to dedicate to blue iris only... what computer specs should be minimum on the computer to keep my little system( 4 reolink-410’s) running as smooth as possible?
Click to expand...
it depends if you want to future proof it and what your budget is...can be done for 100-500...
 
  • Like
Reactions: Mr.Key
Mr.Key said:
My MacBook Pro is i5 2.7ghz 8gig of ram

how about this one sir?
CLEARANCE!!! Fast HP Desktop Tower Computer PC Core 2 Duo WINDOWS 10 Home / Pro | eBay
Click to expand...
NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!
that is a really old system that is about 10 years old...complete garbage and you wont be able to run BI with your cams...
why dont you bid on the system i showed you?
you can get third gen systems all day for 150 but that one is 4th gen and I am pretty sure you will get it for about 150
 
As an eBay Associate IPCamTalk earns from qualifying purchases.
fenderman said:
NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!!!!!
that is a really old system that is about 10 years old...complete garbage and you wont be able to run BI with your cams...
why dont you bid on the system i showed you?
you can get third gen systems all day for 150 but that one is 4th gen and I am pretty sure you will get it for about 150
Click to expand...
Hey
 
You must log in or register to reply here.
Top Bottom