Urgent: Can someone please share a Pre 6.7.1.0 Install file?

G

gawainxx

Young grasshopper
Mar 7, 2018
32
2
Can anyone please share an install package from 6.6.X or prior? The 6.7 update hosed my system.
 
Tried doing that, I found a few update files but not a full installer. applying the update as a downgrade has semi fixed my issues but the server is now very unstable.
 
gawainxx said:
Tried doing that, I found a few update files but not a full installer. applying the update as a downgrade has semi fixed my issues but the server is now very unstable.
Click to expand...
you dont need the full install...have you tried to newest full install package?
 
Yup,

The issue I've been encountering with 6.7.1.0 is that All of my cameras will show as offline. Downgrading it to 6.6.9.2 with the patch allows all of my cameras except the Nest to eventually connect but the server remains in a rather volatile state where the service will just randomly fail, requiring to me re-launch it.

I've tried a clean install and adding the cameras back but I have the same issue where BI won't connect to them. Things look good on the windows firewall end, I've even tried disabling it.
 
gawainxx said:
Yup,

The issue I've been encountering with 6.7.1.0 is that All of my cameras will show as offline. Downgrading it to 6.6.9.2 with the patch allows all of my cameras except the Nest to eventually connect but the server remains in a rather volatile state where the service will just randomly fail, requiring to me re-launch it.

I've tried a clean install and adding the cameras back but I have the same issue where BI won't connect to them. Things look good on the windows firewall end, I've even tried disabling it.
Click to expand...
disable hardware acceleration
 
fenderman said:
disable hardware acceleration
Click to expand...
Intel HD Hardware acceleration is currently off.

After restarts I'll get this for 5-10 minutes and if I'm lucky 3 of the cameras will have connected. The Nest will never connect anymore.

The log shows "Signal: Network retry" The nest Camera shows a rather weird Low FPS of 1.50 to 1.60 in the Camera status

 
Last edited:
I have a foscam 9803p which is usually the first camera to initialize , an amcrest ipm-721s and an amcrest ipm- xh1b that connect a few minutes later. The nest cam refuses to display at all since the update, even after being rolled back to 6.6.9.2 and having the pre-upgrade registry file applied. All cameras are in good connection status, the server has a 1gbit link through a switch that has a 1gbit link to the router. Speed and packet tests to the router and internet both look good, routing looks good. I've rebooted the switch since then just incase, no dice. None of the cameras seem to work on 6.7

This behaviour wasn't present until the 6.7 upgrade had been applied now I can't get it working as I had it prior.
 
Guess i'll try a NUKE IT WITH FIRE install using 4.7.1, purging out ALL data directories and reg keys after uninstalling the current app.
 
Figured the issue out, BI seems to REAAALY dislike my nest cam currently. The sever begins to get very unstable as soon as I enable it, It's been working seamlessly after disabling it. I'm planning to replace it with a POE camera tomorrow so it's not that big of a deal.

Things seem to work fine now that I've disabled that camera. I'm getting some odd FPS spikes with a few of the cameras but i'll figure that out as a separate issue.
 
Do you happen to have a nest or dropcam streaming? I had to disable mine for any other the cameras to work correctly. Removing it entirely fixed my weird frame spikes.
 
Nope, just 2 sv3c at the moment, have about a dozen more to connect but trying to get my bugs out. Thought I was close everything was working, even got my phone app working. Then it updated yesterday and it literally crashed.

Sent from my SM-N910V using Tapatalk
 
finiata said:
Nope, just 2 sv3c at the moment, have about a dozen more to connect but trying to get my bugs out. Thought I was close everything was working, even got my phone app working. Then it updated yesterday and it literally crashed.

Sent from my SM-N910V using Tapatalk
Click to expand...

Turn off auto update. Download manually from website so you always have a version to go back to.
 
  • Like
Reactions: JDWX
You must log in or register to reply here.
Top Bottom