I bought a Hikvision DS-2DE3A400BW-DE/W(F1)(S5). According to the tech sheet, the camera is IP66 suitable for outdoor, but the exposed heatsink above is something that I would have not expected from a "pro series" camara. The heatsink is a “magnet” for dust. Also, near the cable there is a gap allowing the water, dust and insects make their way to the mount box and the wires inside.
I've made this 3d print in order to increase the protection, allowing a good ventilation in the same time. It's made for DS-2DE3A400BW-DE/W(F1)(S5), but it should work with other mini PTZ models as well.
Feel free to use it in your personal projects. All thoughts are welcome.
www.prusaprinters.org
I've made this 3d print in order to increase the protection, allowing a good ventilation in the same time. It's made for DS-2DE3A400BW-DE/W(F1)(S5), but it should work with other mini PTZ models as well.
Feel free to use it in your personal projects. All thoughts are welcome.
Printables
www.prusaprinters.org
