Question on auto tracking with DH-SD6CE445XA-HNR

[missel]

Hello,

First, sorry for my poor English.
Second, I don't know if I am in the good section to expose my needs.

I bought a DH-SD6CE445XA-HNR, very good product.
Very big thank to IPCAMTALK cause I found the way to setup the auto tracking.

I would like to do something but I don't know if it's possible.

I try to explain :
I set up
3 presets (Preset1; Preset2; Preset3). Preset3 is opposite view of Preset1 and Preset2 is a view in the middle of preset1 view and preset3 view.
3 Smart plan
3 IVS with 2 separates intrusions zones for each preset

The default position is Preset1
If an intrusion appears in this Preset1, the auto tracking is working through the 3 presets (not always but let say is working !!). After the 300 sec the camera come back to Preset1.

I would like when an intrusion happens in Preset3, that the camera "turns" from Preset1 to Preset3 and records the events.
Is it possible ?
If yes, how to do it ?

Add info :
I never found the solution to operate the tripewire.
The only type of rule is working is Intrusion.

Thanks in advance for your help and advice.

Missel

 

[EMPIRETECANDY]

For the IVS setting, you can refer to @Wildcat_1 review about the SD5A425XA-HNR.