No video in ACS from camera

[XuMEPA]

[FONT=&amp]The M1014 was working just fine, but today the image from the camera in ACS is missing. I've [FONT=&amp]restarted the camera already and don't see a difference. I've reset to default settings [FONT=&amp][FONT=&amp]and don't see a difference.[/FONT][/FONT]
[FONT=&amp]ACS version is 4.21.014 - Camera Firmware is 5.50.5.2.
A few lines from system log:
[/FONT]
[/FONT][/FONT]

<INFO    > Sep 23 12:13:48 priem1 syslogd[856]: 1.4.1: restart.
<CRITICAL> Sep 23 12:13:48 priem1 syslogd[856]: /dev/console: Resource temporarily unavailable
<CRITICAL> Sep 23 12:13:48 priem1 kernel: [   11.610000] ambarella-i2c ambarella-i2c.0: ambarella_i2c_irq in wrong state[0x9]
<CRITICAL> Sep 23 12:13:48 priem1 kernel: [   11.610000] ambarella-i2c ambarella-i2c.0: status_reg[0x40]
<CRITICAL> Sep 23 12:13:48 priem1 kernel: [   11.610000] ambarella-i2c ambarella-i2c.0: control_reg[0x3]
<CRITICAL> Sep 23 12:13:48 priem1 kernel: [   12.610000] ambarella-i2c ambarella-i2c.0: No ACK from address 0x60, timeout!
<CRITICAL> Sep 23 12:13:48 priem1 kernel: [   12.610000] ambarella-i2c ambarella-i2c.0: I2C state 0x9, please check address 0x60!
<CRITICAL> Sep 23 12:13:48 priem1 kernel: [   12.620000] ambarella-i2c ambarella-i2c.0: Start state is 0x9!
<CRITICAL> Sep 23 12:13:48 priem1 kernel: [   12.640000] ambarella-i2c ambarella-i2c.0: ambarella_i2c_irq in wrong state[0x9]
<CRITICAL> Sep 23 12:13:48 priem1 kernel: [   12.640000] ambarella-i2c ambarella-i2c.0: status_reg[0x40]
<CRITICAL> Sep 23 12:13:48 priem1 kernel: [   12.640000] ambarella-i2c ambarella-i2c.0: control_reg[0x3]
<CRITICAL> Sep 23 12:13:48 priem1 kernel: [   13.630000] ambarella-i2c ambarella-i2c.0: No ACK from address 0x60, timeout!
<CRITICAL> Sep 23 12:13:48 priem1 kernel: [   13.630000] ambarella-i2c ambarella-i2c.0: I2C state 0x9, please check address 0x60!
<CRITICAL> Sep 23 12:13:48 priem1 kernel: [   13.640000] ambarella-i2c ambarella-i2c.0: Start state is 0x9!
...
<CRITICAL> Sep 23 12:13:49 priem1 /usr/bin/ambad[872]: Failed to get VIN source info: Invalid argument
<CRITICAL> Sep 23 12:13:49 priem1 /usr/bin/ambad[872]: Failed to set encode source buffer format: Invalid argument
<CRITICAL> Sep 23 12:13:49 priem1 /usr/bin/ambad[872]: Failed to start preview: Resource temporarily unavailable
<CRITICAL> Sep 23 12:13:49 priem1 /usr/bin/ambad[872]: Could not get get video info: Invalid argument
...

[FONT=&amp][FONT=&amp][FONT=&amp][FONT=&amp][FONT=&amp]
[/FONT]
Can anybody help me with it problem? Axis support is so slow .
[/FONT][/FONT]
[/FONT][/FONT]

 

[nayr]

looks like a hardware failure, going to have to wait on Axis to render judgement.

 

[XuMEPA]

I've followed all support instructions (update firmware through browser, reset to default config, update firmware through ftp) , but this gave me zero result. Today I was in the building where this camera is. I just unplugged power and then plugged power in and it fixed problem.