- Dec 14, 2016
- 60
- 15
ok so have 2 x IPC-T5442t-ZEB that have suddenly both stopped detecting ivs tripwire in B&W mode only? not changed any settings however they did get rebooted after a power cut.
tried rebooting everything, poe switch, cam etc but logic says its within the camera as daytime onvif are sent to bi as normal
would a super low manual shutter be the problem, if running custom shutter 0ms - 7 ms, so the image is quite dark?
Device TypeIPC-T5442T-ZEB
System VersionV2.840.15OG00D.0.R, Build Date: 2022-08-18
WEB VersionV3.2.1.1261216
ONVIF Version21.12(V3.1.0.1235054)
Algorithm Version1.0.7
Security Baseline VersionV2.1
Copyright 2022, EmpireTech all rights reserve
tried rebooting everything, poe switch, cam etc but logic says its within the camera as daytime onvif are sent to bi as normal
would a super low manual shutter be the problem, if running custom shutter 0ms - 7 ms, so the image is quite dark?
Device TypeIPC-T5442T-ZEB
System VersionV2.840.15OG00D.0.R, Build Date: 2022-08-18
WEB VersionV3.2.1.1261216
ONVIF Version21.12(V3.1.0.1235054)
Algorithm Version1.0.7
Security Baseline VersionV2.1
Copyright 2022, EmpireTech all rights reserve
