IPC-HFW5241E-Z12E dialed in for night

[wpiman]

Just dialed in my settings for night time once again. Pretty damn happy with these ones.... Figured I'd share for anyone with a setup close to mine. The IPC-HFW5241E-Z12E.

I am noticing my camera occasionally goes out of focus. I have it on manual. I set it to night and day using the http interface-- and then I set the focus 5 seconds later to ensure it is right. Occasionally I am seeing it off....

Maybe I will have to record full time to figure out when it is getting blurred....

http://admin:[email protected]/cgi-bin/configManager.cgi?action=setConfig&VideoInMode[0].Config[0]=0

That does day mode... 5 seconds later..

http://admin:[email protected]/cgi-bin/devVideoInput.cgi?action=adjustFocus&focus=0.144&zoom=1.0

Focuses @ 0.144... For night I use 0.189..

Also- trying to figure out the ideal time to switch. I use a solar radiation sensor on my weather station to make the call...

 

[StevenFromTexas]

Just dialed in my settings for night time once again. Pretty damn happy with these ones.... Figured I'd share for anyone with a setup close to mine. The IPC-HFW5241E-Z12E.

I am noticing my camera occasionally goes out of focus. I have it on manual.

I used to have the same intermittent focus problem with that camera model. I gave up trying to figure out what the problem was and now operate two of the cameras used for license plate capture in black and white 24/7/365. The other two are used for long-distance viewing in color 24/7/365. They never go out of focus now.

 

[wpiman]

Do you use Blue Iris?

I shut off the PTZ/controls to the camera from Blue Iris to have one less variable there. All the modes on the camera are set to manual focus.

I set the camera to continually record. I'll see if and when the focus gets out of whack...

Not interested in running multiple cameras. Want just one that works.

I have a trigger from another machine which puts in in day mode if the solar radiation is above 10 and into night mode if it is below 4.
I then set the focus 5 seconds later.

I also discovered there is a web based reset I can do as well. I am hoping I don't need to add that to the mix.

 

[bigredfish]

Color/IR focus shift. There's some technical explanation for it but Its a thing..

Whats the distance to the target? And how fast would you say the vehicles are going

I have one LPR cam I run in B&W 24/7 which defeats the color to IR shift in focus.
The other (this one) I run a Schedule profile and have it switch 45 min before sunset and 45 min after sunrise to allow the camera enough light to focus.
Yeah I have to adjust the switch time 3-4 times per year , but that 4-5 minutes of my life I'm ok with

Same camera Approx 100ft to target, typical speed 20-30mph. last one is a motorcycle

 

[wpiman]

Color/IR focus shift. There's some technical explanation for it but Its a thing..

Whats the distance to the target? And how fast would you say the vehicles are going

I have one LPR cam I run in B&W 24/7 which defeats the color to IR shift in focus.
The other (this one) I run a Schedule profile and have it switch 45 min before sunset and 45 min after sunrise to allow the camera enough light to focus.
Yeah I have to adjust the switch time 3-4 times per year , but that 4-5 minutes of my life I'm ok with

Same camera Approx 100ft to target, typical speed 20-30mph. last one is a motorcycle

View attachment 180517 View attachment 180518 View attachment 180519 View attachment 180520 View attachment 180521 View attachment 180522

View attachment 180524 View attachment 180525 View attachment 180526 View attachment 180527 View attachment 180528 View attachment 180529 View attachment 180530

I can't even change my "Day and Night" mode to B&W. It is set to auto and I cannot change it. I tried a bunch of settings...

I about about 150 to 180 feet I think. I have IR spotlight on the spot...

I think I am going to just change my day/night mode to happen like 30 minutes before sunrise and 30 after sunset. I do that with homeseer so I can make it very configurable...

 

[wpiman]

I can't even change my "Day and Night" mode to B&W. It is set to auto and I cannot change it. I tried a bunch of settings...

I about about 150 to 180 feet I think. I have IR spotlight on the spot...

I think I am going to just change my day/night mode to happen like 30 minutes before sunrise and 30 after sunset. I do that with homeseer so I can make it very configurable...

Ok- I found another setting-- if you make it full time then you can select color and B&W. Thanks.... Daytime now forces color--

 

[bigredfish]