I-frames issues help!

[Mofo84]

I just installed blue iris on a new computer and imported setting and transferred over my license. But 2 of the cameras are not getting 15/1 frames.
Any ideas?

 

[wittaj]

That is what you want with BI.

1.00 Key means the FPS and iframes match.

The Key is a ratio, so 15/15 = 1.00

 

[Mofo84]

That is what you want with BI.

1.00 Key means the FPS and iframes match.

The Key is a ratio, so 15/15 = 1.00

But 2 cameras are only getting 15/0.15

 

[Bruce_H]

You will have to set the FPS to 15 and the Iframe settings to 15 on the web configuration page for each camera! This is not controlled by BI!

I also notice that one of your cameras is set to use H265 compression, you probably should change it to H264, which is the recommended configuration for BI

 

[Mofo84]

You will have to set the FPS to 15 and the Iframe settings to 15 on the web configuration page for each camera! This is not controlled by BI!

I also notice that one of your cameras is set to use H265 compression, you probably should change it to H264, which is the recommended configuration for BI

I do have them like that . Also when I change the camera that was in H265 to H264 the frames do this

 

[wittaj]

Oh I missed the bottom two, but the subs are at a Key of 1.00 and that is the important one for motion detection.

I am guessing hidden in the camera GUI somewhere is some AI analytic or coding that is causing that low KEY.