Hi guys,
I’m looking for some advice on adding human/vehicle detection (Motion Detection 2.0 / AcuSense) to my setup.
I want:
Main question:
Is the DS-7616NXI-I2/S powerful enough to provide Motion Detection 2.0 / human-vehicle classification on all 4 channels and show it correctly in Hik-Connect?
Or is the DS-7716NXI-I4/S the better/safer choice?
I tested 2x UniFi AI Port, but the image quality was noticeably worse than the native Hikvision stream.
Any idea why? (sub-stream usage, transcoding, bitrate limits, etc.)
If there’s a better solution (different NVR, camera-side AI, VMS software, etc.), I’m open to ideas.
Thanks in advance for any help!
I’m looking for some advice on adding human/vehicle detection (Motion Detection 2.0 / AcuSense) to my setup.
Current setup
- 4x Hikvision DS-2DE2A404IW-DE3 (PTZ)
- Cameras only support basic motion detection (no person/vehicle filtering)
Goal
I want:
- Human & vehicle detection on all 4 cameras
- Proper event labels in Hik-Connect playback timeline (person / car / other)
- Use an NVR to add AI features to my “non-AcuSense” cameras
NVRs I’m considering
- DS-7716NXI-I4/S
- DS-7616NXI-I2/S
- (preferred due to budget)
Main question:
Is the DS-7616NXI-I2/S powerful enough to provide Motion Detection 2.0 / human-vehicle classification on all 4 channels and show it correctly in Hik-Connect?
Or is the DS-7716NXI-I4/S the better/safer choice?
UniFi AI Port test
I tested 2x UniFi AI Port, but the image quality was noticeably worse than the native Hikvision stream.
Any idea why? (sub-stream usage, transcoding, bitrate limits, etc.)
Open to suggestions
If there’s a better solution (different NVR, camera-side AI, VMS software, etc.), I’m open to ideas.
Thanks in advance for any help!
