Hello,
I hope it is ok to post here, asking for some support by the forum?
I am having a bit of difficulty to set up my Dahua/Empiretech cam's (IPC-T5442TM-AS, IPC-HDW5442TM-AS), in order to record IVS events properly.
Current status:
Expectation:
- Recording as long as event is valid (meaning, if I stay in intrusion zone for 1 minute, recoding should be of same length. If I stay in intrusion zone for 2hrs, recording should be two hours)
Is my expectation achievable at all? If so, how to / what to change in settings?
Any advise is welcome.
Apologies for my poor english.
Cheers from Germany


I hope it is ok to post here, asking for some support by the forum?
I am having a bit of difficulty to set up my Dahua/Empiretech cam's (IPC-T5442TM-AS, IPC-HDW5442TM-AS), in order to record IVS events properly.
Current status:
- Cameras equipped with SD-Cards.
- No NVR or other external recoding yet.
- Smart Plan set up (IVS selected)
- IVS set up (intrusion zone defined, etc - see picture attached)
- Events are being recognized and are being captured - BUT only for less than 20sec. approx.
Expectation:
- Recording as long as event is valid (meaning, if I stay in intrusion zone for 1 minute, recoding should be of same length. If I stay in intrusion zone for 2hrs, recording should be two hours)
Is my expectation achievable at all? If so, how to / what to change in settings?
Any advise is welcome.
Apologies for my poor english.
Cheers from Germany


Last edited:
