Control camera lights T180?

[David9723]

is it possible to control the empire tech T180 led lights with BI?

 

[wittaj]

Nope we have tried to figure out the API but haven't cracked it yet LOL. They are either on or off.

 

[David9723]

What about using the dahua app?

 

[wittaj]

Nope not a function there either. It is a function of the profile and setting for the light.

 

[Mark_M]

In the newest API document I have, right above "change binocular camera's splice mode (5.8.1)" there is mention of lighting control which is new.
I don't know if this would work with the T180 because I do not have that camera.


I hope this has some relevance to lighting on this camera?

/* Get lighting config - 5.7.1*/
/Syntax:
http://<server>/cgi-bin/configManager.cgi?action=getConfig&name=Lighting
/Method:
GET

/Description Get lighting
http://192.168.1.108/cgi-bin/configManager.cgi?action=getConfig&name=Lighting

/SuccessReturn:
head.Correction=50
head.FarLight[0].Angle=0
head.FarLight[0].Light=0
head.Mode=ZoomPrio
head.NearLight[0].Angle=0
head.NearLight[0].Light=0
head.MiddleLight[0].Angle=50
head.MiddleLight[0].Light=50

/Comments:
head = table.Lighting[ChannelNo][ConfigNo]：

ChannelNo: integer, array index starts from 0, which means video channel (equals to video channel index -1, and so 0 means channel 1).
    
ConfigNo: array index, can be 0, 1 or 2. 0 means config for day, 1 means config for night, and 2 means config for normal scene

/* Set lighting - 5.7.1 */
/Syntax:
http://<server>/cgi-bin/configManager.cgi?action=setConfig&<paramName>=<paramValue>[&<paramName>=<paramValue>…]

/Method GET

/* Description Set lighting - Example: */
/Turn on light:
http://192.168.1.108/cgi-bin/configManager.cgi?action=setConfig&Lighting[0][0].FarLight[0].Light=10&Lighting[0][0].NearLight[0].Light=90&Lighting[0][0].Mode=Manual

/Shift the light to ZoomPrio mode:
http://192.168.1.108/cgi-bin/configManager.cgi?action=setConfig&Lighting[0][0].Correction=50&Lighting[0][0].Mode=ZoomPrio

/Success Return message:
OK

/* Comments: */
/Parameters in URL:
paramName and paramValue are as table below.
/In table below,
head = Lighting[ChannelNo][ConfigNo]
/Some lighting equipment has the following restriction:
Lighting[0][0].FarLight[0].Light + Lighting[0][0].NearLight[0].Light+ Lighting[0][0].MiddleLight [0]. Light <=100.