Capture advance NVR (Dahua) firmware?

[dudemaar]

Hello folks! Been awhile since I’ve been around here. Hope all is well? Anyway, I have a client who gave me a new in box capture advance 8 ch Poe NVR and ask if I could use it for the install. Capture advance looks to be ADI’s exclusive ndaa compliant brand but is 100% a Dahua. I am trying to add Andy’s IPC-T24IR-AS to the NVR but it’s only adding via Onvif and losses any AI capabilities. Is there something im not doing right? Or can I flash the NVR firmware to Dahua or Empiretexh? Thanks

 

[97JeepXJ]

No experience with that brand but I was successful at flashing 3 Lorex NVR’s with this write up. Proceed at your own risk

M

Post in thread 'Lorex'

Jun 10, 2018

Yes - the Lorex version does include a remote control.... and has the fancier face with all the buttons. Ok - this was a pain to document and write out....

First of all – I am not responsible for your warranty or if this somehow goes wrong and you brick your NVR. I cannot provide personal support for this. Much of what I learned on here regarding how this is done is thanks to cor35vet and others before me who ventured into modding firmware and unbricking Dahua IP cameras that have been bricked for various reasons. There was just not a lot of info on the NVR’s though and what info there...

• MixManSC

• 

Cable I purchased

Amazon.com: Tripp Lite 18in USB to Null Modem Serial Adapter Cable FTDI w/COM Retention M/F 18" (U209-18N-NULL) : Electronics

Amazon.com: Tripp Lite 18in USB to Null Modem Serial Adapter Cable FTDI w/COM Retention M/F 18" (U209-18N-NULL) : Electronics

www.amazon.com