Can I record on motion 24/7 and set email alerts on schedule?

[Steve in IT]

I have a new HIKVDS9616NII88TB that I have setup to record only on motion 24/7, but I also want it to send emails on motion only during certain evening hours. So again it is currently setup to record on motion all the time and i only want email alerts during after hours, is this possible to have both? Do I create a separate profile or something else

Attached are a couple pics on the remote admin interface options that I have. These are a little bit different than the in person NVR interface.

Thank you for any and all help

 

[trempa92]

If im not mistaken, Linkage Method dictates when its gonna send email,notify surveillance center and when to record, therefore its not possible under single event ,in this case motion.

BUT do a i.e region entrance/exit as an EMAIL confirmation, while its being recorded by Motion detection.

EDIT:

Or simply push all EMAILS on motion and use email client rules to rule out messages sent in certain time

Cheerio

 

[alastairstevenson]

I have setup to record only on motion 24/7

In the separate storage schedule.

I also want it to send emails on motion only during certain evening hours

So maybe setting the arming schedule under Basic Event would do that - though it would also inhibit recording the motion events outside the schedule, which may be undesired.
Guessing a bit as that's not something I've tested.