Blue Iris won't record new cam

T

Tpir

n3wb
Nov 25, 2017
16
0
Hi Everyone,

I just added a new Fiscal 9900 and for some reason it wont record contiously like my others do. It will record for 10sec and then stops.

Anyone have any ideas?
Thanks T
 
Tpir said:
Hi Everyone,

I just added a new Fiscal 9900 and for some reason it wont record contiously like my others do. It will record for 10sec and then stops.

Anyone have any ideas?
Thanks T
Click to expand...
first return that junk foscam....
second, you didnt set it up correctly in blue iris...look at your record settings.
 
I changed the setting to match another camera and it worked. If I change the IP to the 9900 it stops :(
 
When you change the IP it stops the camera and then starts it. Once that happens I can see the stream but the recording just stops. Besides the camera being garbage I don't have a way of retuning it so I need to learn to live with it and find a way to fix the issue unfortuntily.
 
To add to that I have tried everything, RTSP, different stream rates, dropping it down to 720p. Nothing I cannot get this one out of 8 cams to record.
 
Tpir said:
To add to that I have tried everything, RTSP, different stream rates, dropping it down to 720p. Nothing I cannot get this one out of 8 cams to record.
Click to expand...

Do you have 'Record' set to 'Continuous' or 'When triggered'? (How you want it to function).
 
I have it set to continuous? Also sorry I am assuming the guys are busy but what is the best way to get a hold of support? I emailed them almost 10 days ago but no response yet.

Thanks T
 
Tpir said:
I have it set to continuous? Also sorry I am assuming the guys are busy but what is the best way to get a hold of support? I emailed them almost 10 days ago but no response yet.

Thanks T
Click to expand...
Blue iris is run and supported by a single person..email from a standard account such as gmail...
try deleting the camera and adding it back in blue iris.
 
Question: On the 'Schedule' tab for the cam that won't record continuously as selected, is the box inside the red outline in the image below checked or unchecked?

cam_sched.jpg
 
I checked the camera does not have that checked. I also tried both changing a working camera and deleting/adding a new one and same thing.
 
So I changed it to Re-Encode from direct-to-disk and it works. The only issue with direct-to-disk is that I get artifacts hence why I am not doing it that way for any of the other 7 camera;s. Any idea's?
 
Tpir said:
So I changed it to Re-Encode from direct-to-disk and it works. The only issue with direct-to-disk is that I get artifacts hence why I am not doing it that way for any of the other 7 camera;s. Any idea's?
Click to expand...
post an image of the cameras web interface video tab..
 
Sure here they are.
Settings1.jpg
Settings2.jpg
Settings3.jpg
Settings4.jpg
Settings5.jpg

In the below you will see how I was not recording. The small slices are the different settings I tried until I turned it to re-encode.
Recording.jpg
 
Reset the camera and use default ports...there is never a need to change ports...
 
Factory reset the Cam and just changes IP, User/Pass. Then I deleted the camera and re-added it with a new name. Only settings added was direct, IP:88 and find. Still not recording with direct only when re-encoding is on:(
 
Tpir said:
Factory reset the Cam and just changes IP, User/Pass. Then I deleted the camera and re-added it with a new name. Only settings added was direct, IP:88 and find. Still not recording with direct only when re-encoding is on:(
Click to expand...
you didnt follow instructions...you changed the http port...go back..reset the camera and DONT CHANGE ANY PORTS.
 
You must log in or register to reply here.
Top Bottom