Hello. I've noticed a strange problem. I have been getting notifications of motion from my Homekit (via scrypted) but not DMSS. When i log into DMSS to check why, i am noting no events for that time period and when i try to play, it literally jumps over it and goes back 30+ minutes... like the...
Hi
I'm slowly building my system with Dahua based cameras, and I'm trying to narrow down my choices for NVR.
I do not need POE because I have more than enough ports on a 24 port POE switch.
I also prefer not to go the BI route, and rather have dedicated hardware (less features, less that can...
Hi,
Is it possible for the current Dahua NVRs to stream a grid of all channels on an rtsp url? I can do this on Hikvision NVRs for displaying a grid to home automation touchscreens and then touching the area for each channel loads the full screen rtsp for that channel, but I know this isn't a...
I just got a shiny new NVR. I have a 4tb premium drive in my old NVR and was going to take the drive out and swap it. Do I need to format it, or do anything special ? Or will the NVR prompt me to do everything
TL;DR: Upgraded to AcuSense NVR (DS-7608NXI-I2/8P/S (E)), human/vehicle detection works in Event Viewer but not showing as tags/markers in playback timeline on IVMS, Hik-Connect, or HikCentral Lite. Am I missing a setting or is this a limitation?
Hoping you guys can help me out here. I...
Hi there, I'm looking to install a 16+ ch PoE NVR that ideally can take a SIM card and use it to send texts to a list of predefined numbers when alerts are triggered. I have found that Hikvision sells systems that do exactly this, but I have contacted sales and they told me that it's "not a US...
Hello,
I am trying to repair a Dahua NVR4216-4KS2 that is not booting.
The main BIOS/firmware is stored in an SPI flash EEPROM (Winbond 25Q128, labeled as U130 on the PCB).
I have a CH341A programmer and I already attempted the following steps:
Identified the correct chip (W25Q128, 3.3V...
Hopefully someone has a solution...
I rescued an LTS LTD8316T-ET(U) NVR that was part of an office cleanout as the scrap guy was heading for the door. It has no drive, but I have one for it. It boots up and goes right to empty video (no cams attached).
So, apparently it works but it does not...
Hear me out... drop the pitch-fork! :)
For people like me that don't have the time to fiddle with things and need them to work for years on end and with remote management and remote firmware updates that work out of the box... it seems like UNIFI protect is the way to go. Yes, my Dahua Turret...
I've been looking to upgrade my very old NVR LV-N9808C8E (LaView Branded Hikvision)
I have a mix of cameras:
1x - DS-2CD2342WD-I
1x - DS-2CD2085FWD-I
2x - DS-2CD2083G0-I
1x - LV-PWD50202-W (LaView Branded HikVision Camera)
4x - LV-PB912F4C (LaView Branded Hikvision Camera) - Only using 1
The...
Guy on NVR #1 wants to see NVR #2 & #3s cameras on NVR #1. Can't go on the internet. the buildings already have ubnt nano stations between them just for our stuff. What's the best way to put the other two NVRs cameras on NVR #1?
Thank you.
My home sits on a one acre lot and I am looking to improve surveillance for peace of mind and evidence capture for any incidents that may occur.
Layout: The lot is approx 150’ wide along the road access, and 300’ long. Densely wooded stewardship forest to the south, neighbors to the west...
HI all
HELP
I was stupid enough to update my NVR (dahua dh-nvr5208-8p-4ks2) as just was installing a new ipcamera and wasnt finding it. so i thought might be firmware update needed.
So i used the the ConfigTool and updated the new firmware from dahua. as it was showing up on there.
The NVR...
I have an imou Cell 2 camera that claims to be compatible with Onvif NVRs (IMOU life), but when I try to connect it to my Dahua NVR, it never finds it, and when I add it manually, it never connects.
Hey guys,
So I bought my mother a NVR16CH-16P-2AI with 5 Dahua cameras. I'm running it headless as I'll be managing it from her workstation in her study. There is an 8TB WD Purple installed.
I got it working to the point where I have initialized the cameras and I can see the live feeds, but I'm...
Hey all! Thanks for all of the help recently. I have a silly question yet again. With a less than or equal to 8 camera setup, should I use an NVR? I saw how blue iris is good but I don’t know if I have a spare working PC? Is it like possible to run BI on an NVR or do I get an NVR and hook it up...
Hello friends, I have a Hikvison NVR and I want to put software on this device as a console. Where can I find the console cable in the attached image or is there another method? Thanks.
I am helping out my neighbour with his camera setup. As he had problems with his installer after asking for his login credentials, to install extra camera's, I convinced him I am a nerd expert with these gadgets. :p
He has a Hikvision DS-7608NI-K2/8P with 5 Hikvision IP-camera's. I have...
This Dahua NVR doesnt boot. Makes a red blinking led beep constantly and this chip is getting 60C. I holded my finger on top and I got burn. What can I do?
Hi guys,
Long story short, I had a Hikvision camera (the DS-2CD2346G2-ISU/SL) connected to a Hik NVR ( the DS-7604NXI-K1 / 4P) and I've recently moved to the Ajax platform with is waaaaay easier (at least for me) to use.
Since then, I can see my camera up and running in my HikConnect app on my...
I have my cameras setup as the photo shows, my question is in order to view a camera from the nvr using a PC-VLC or from smart tv apps do I need to connect the device to the router the nvr connected to? or is it ok that the device is connected to AP and the nvr is connected directly to the...
Hello everyone,
I am planning a surveillance system for my semi-detached house and am hoping for your expertise. Here is an overview of my ideas:
The property:
Semi-detached house (left side)
Dimensions: 7m wide, 11m deep
Garage: approx. 6.5m long, 3m wide, detached from the house
Planned...
Could anyone help me access my Hikvision 104M-A
firmware - 3.4.98 build 171121
I have tried several tools that I can find and fixes online but no luck I am unable to access the admin panel or anyone other panel to reset or start again with this NVR.
Hello
I have 5 Dahua cameras connected to a Dahua NVR.
My main LAN is on 192.168.0.xxx, whereas the cameras are on Dahua-defined subnet 10.1.1.xxx.
I need to move that cameras onto the main LAN but cannot get it to work.
I have accessed the web page of each camera individually and set the...
Good evening there ipcamtalk.com forum folks!
My Techage Network Video Recorder (model XM-6916k) has been setup and is working as good as I hoped!
It offers custom voice prompts over POE cameras which offer 2 way communication between owner + guest/delivery folks/potential criminals..
I see a...
I have some questions about the NVR16CH-16P-2AI 16. I only found a couple of reviews on this device and wanted to know of if others shared the same experiences of these reviewers? Perhaps there have been software/firmware improvements since these reviews were posted.
Good feature set, mediocre...
Hi,
I was hoping for some guidance with setting up a Dahua POE switch (DH-PFS4218-16GT-240) with a Dahua POE NVR (DHI-NVR5432-16-I/L 32CH).
I currently have 16 IPC-HDWW3549HP-AS-PV Cameras plugged in to the NVR, it works fine and was pretty straight forward to setup.
The problems is I want to...
I'm using my personal, Amcrest branded NVR, running Dahua firmware, to provide offsite recording of two channels of a ReoLink NVR. I'm able to do this because although these particular ReoLink cameras are not ONVIF compatible, the ReoLink NVR itself provides ONVIF compatibility. It was simply...