Search results

  1. R

    Dahua N52B3P4 issues

    Ok last update unless someone else chimes in. Continues to reboot by itself after awhile so instead of fighting it, I just purchased this one per another user suggestion. https://empiretech01.com/products/empiretech-nvr16ch-16p-2ai-s2-16ch-1u-16poe-2hdds-wizsense-network-video-recorder
  2. R

    Dahua N52B3P4 issues

    Another update: Seems the Poe status on each camera had somehow changed to port 37777 instead of “port 1” etc. I chose to hit ok on the delete message and I saw it changed it back to ports 1-7 so maybe that was the issue? It has randomly rebooted twice more but as of now it’s running again...
  3. R

    Dahua N52B3P4 issues

    Ok update: I re-installed the original psu and it’s now doing the same with the random reboots so I don’t think it’s a supply problem. Currently testing it again with fewer cameras. Maybe the Poe side is failing?
  4. R

    Dahua N52B3P4 issues

    Good morning everyone, I have had this NVR setup and operating for just over a year and it seems to be having issues now. I am currently running (6) IPC-T54IR-ZE White S3 cameras purchased from Andy’s Amazon store. I also have an LPR setup IPC-HFW5241E-Z12E I bought the NVR used on eBay so...
  5. R

    DMSS playback not allowing me to filter the NVR AI IVS...

    current settings. What should they be set to?
  6. R

    DMSS playback not allowing me to filter the NVR AI IVS...

    Ok I was able to figure it out thanks to another user @catcamstar posted the following. See the photo as I saved it as a screenshot. Basically you go into your settings>system>storage tab and tell it to record or save the intelligent recordings for whatever channel you’re wanting. I only want...
  7. R

    DMSS playback not allowing me to filter the NVR AI IVS...

    yes on the NVR itself I can see the IVS triggered events just not on the app
  8. R

    DMSS playback not allowing me to filter the NVR AI IVS...

    Any updates to this? I seem to have the same issue when trying to filter my LPR during the daytime since setting up IVS rules.
  9. R

    Where to buy HFW5241E-Z12E?

    More samples with the help of @bigredfish
  10. R

    Where to buy HFW5241E-Z12E?

    Ok guess I got confused by the part number change. Thanks!
  11. R

    Where to buy HFW5241E-Z12E?

    Hate to dig up an old thread but hey I searched…. I have one of the HFW5241E-Z12E’s and a friend of mine would like to get one for his house. Where might one pick another one up? Is there a better version that’s basically the same?
  12. R

    Is a Dahua NVR actually 1U or 2U in a rack?

    Ignore the cables as I ran out of zip ties for the moment but she’s hung! Still have to adjust the cameras some but I’m finally on the final stretch
  13. R

    Is a Dahua NVR actually 1U or 2U in a rack?

    I don’t have studs on the piece I’m screwing into though. The span is too short and the only studs are in the corners. Weight of the NVR is close to 10 pounds
  14. R

    Is a Dahua NVR actually 1U or 2U in a rack?

    where did you get that mount? I am wanting to do the same in my closet. Also, are you mounted in a stud or just using wall anchors?
  15. R

    ePOE reliability

    Took the NVR to work and a co-worker is creating me some wall mounts for it. Looks a bit overkill but I guess he doesn’t want it to fall :)
  16. R

    Old BNC analog to new Cameras in 2024

    I don’t know for sure but it seems like they would fit in a junction box
  17. R

    Old BNC analog to new Cameras in 2024

    originally in the wall, but I’ve scrapped the BNC setup and just finished pulling cat6 cables to each camera and will go with Poe
  18. R

    ePOE reliability

    Major update for anyone still reading and may care. I was able to finish the pulls tonight basically solo as my wife had errands to run and couldn’t help. I’m thankful for the help and the push to get these done! Not finished but the hard part is done and just have to finish the ends.
  19. R

    ePOE reliability

    Ok small update. I pulled 2 more cables tonight making it 3-3 for the cat6 swap. Have 3 more to go with one being super easy, and 2 harder ones. one question for you guys. Pulling the harder ones, do I pull from the outside into the closet, or from the closet to the outside? Does it matter? I’m...
  20. R

    ePOE reliability

    Originally it was but I upgraded the cable when I installed them. Lesson learned I guess but now I get to try and pull new cable before the summer heat hits!
  21. R

    ePOE reliability

    These were the connectors
  22. R

    ePOE reliability

    I’m not exactly sure. It would work sporadically which was throwing me off. I used this when I had the analog system
  23. R

    ePOE reliability

  24. R

    ePOE reliability

    I bought a box of vertical cable cat6 plenum reasonably cheap on eBay. Thank you all for the help and support!
  25. R

    ePOE reliability

    thank you for taking the time out of your day and trying to help me! Not anyone’s fault except the cable I guess didn’t want to cooperate
  26. R

    ePOE reliability

    Ok so after many trials and error @bigredfish and I came to the conclusions that my current wire will not work. Unfortunately I am going to have to pull new wire and hope for the best. I have one half of a run so far but have a question for you guys. The box of cat6 I’m using is in the attic...
  27. R

    ePOE reliability

    my apologies. Thanks for the response
  28. R

    ePOE reliability

    Ok for another test could I plug in the 12v connector I have at the cameras location? I still have those ran when I used the analog cameras. would the Poe know that it only needs the signal and not the power? Would I mess something up trying that external power? edit: I took the camera back...
  29. R

    ePOE reliability

    sorry I was testing the first adaptive camera which is port 3. Port 1 is my LPR camera which I ended up running cat6 and connects just fine. Camera 2 I can’t reach so right now is on pause
  30. R

    ePOE reliability

    my cable and connectors are 75 ohm
Top Bottom