Search results

  1. L

    IMOU camera with Dahua NVR

    You didn't enable snapshot - general, only IVS. General must be enabled. Yes, absolutely. This is the best option. I simply cannot connect cameras using a private protocol, so I was looking for an alternative solution. It will be interesting to see how this camera performs. Good luck and...
  2. L

    IMOU camera with Dahua NVR

    Unfortunately no. My IMOU cameras is REX 3D. Of course, this function is not available in ONVIF mode. Therefore, it needs to be activated here: Thus, this function is taken over by the NVR. I hope everything works out for you. It will also be interesting to find out how the camera behaves...
  3. L

    IMOU camera with Dahua NVR

    I'm lucky :) Everything works great.
  4. L

    IMOU camera with Dahua NVR

    I wrote above that IMOU cameras in new NVR firmwares and series are not supported using the private protocol. 4208 also does not allow you to connect private - it just lights up red and that’s it.
  5. L

    IMOU camera with Dahua NVR

    Yes, the entire series "I" still supports IMOU on a private protocol. If you use a private protocol, everything is much simpler. 4208-EI only supports ONVIF with IMOU cameras. And since you use a private protocol, all this is less important in your case: the equipment does almost everything...
  6. L

    IMOU camera with Dahua NVR

    Most likely, Wireless User Isolation was enabled on your Wifi network. After you connected the camera directly, the NVR learned its mac address and everything worked. This is just my guess, of course.
  7. L

    IMOU camera with Dahua NVR

    I would like to share some achievements that I have achieved through a long journey. Firstly, I bought nvr-4208-ei. Of course, IMOU cameras connect to it only via ONVIF. The only event that can be seen is scene change. No SMD, no smart event. Nada)) Here's how I got IVS to work correctly: IVS...
  8. L

    IMOU camera with Dahua NVR

    Agree. But this thread above says that with a firmware update, IMOU cameras stop working. Its true for me too. Therefore, I have to stay on the old firmware and be careful. Or change the entire system, but this is an expense
  9. L

    IMOU camera with Dahua NVR

    After some research, I want to share what I found: Due to a serious security flaw in the some dahua NVR, the authentication protocol has been completely changed in the new firmware, and that is why IMOU cameras do not connect. If you do not update the firmware to maintain compatibility, you...
  10. L

    IMOU camera with Dahua NVR

    What firmware of your NVR? You were able to activate the Cruiser camera using DMSS, or by ImouLife app?
  11. L

    IMOU camera with Dahua NVR

    The new version of config tool (5.001.005) from dahua does NOT support login to imou cameras anymore. If you try to add an imou camera manually by typing ip address and provide username and pass you"ll get message "login prohibited". If you try to scan, you will see nothing...Stay with 5.001.004.
  12. L

    IMOU camera with Dahua NVR

    This is my: Device ModelDHI-NVR4104-4KS2/L System VersionV4.002.0000000.6.R, Build Date: 2023-10-09 Works perfectly with imou cameras. And yes, EOL too. Last firmware dated august 2024, ver. 4.003. Does not support Imou.
  13. L

    IMOU camera with Dahua NVR

    Yes, twice with no success. My nvr has 20231009 firmware and work with imou cameras flawlessly.
  14. L

    IMOU camera with Dahua NVR

    Well, i found the 4.002 firmware for my nvr on the dahua site. This firmware doesnt have issues with my imou cameras. Again, since Dahua released their own cameras similar to imou, the new firmware obviously have hardcoded ban. This is my opinion. Stay with old firmware)
  15. L

    IMOU camera with Dahua NVR

    Well, the firmware is 4.002. My nvr has update 4.003 released this year. IMOU cameras do not work on this version. I return to 4.002 - and everything is fine
  16. L

    IMOU camera with Dahua NVR

    If you have 9 IMOU cameras consider to buy IMOU NVR.\ Not the best idea, but still cheaper than replacing cameras. Or find a dahua nvr from last year or earlier. I'm sure such equipment can be found without problems. IMOU cameras work perfectly on last year's firmware.
  17. L

    IMOU camera with Dahua NVR

    All IMOU cameras that worked on Dahua NVR before the updating with new firmware stopped working. After rolling back to the old firmware they work again as if nothing had happened. This has been tested on several Dahua NVR. Stay with old firmware.
  18. L

    IMOU camera with Dahua NVR

    After further investigation it seems (in my opinion) that Dahua has banned (on new firmware) IMOU cameras on his NVRs since releasing their own cameras with similar capabilities (Hero series, for instance). Stay with old firmware. All functions going well
  19. L

    IMOU camera with Dahua NVR

    After updating my Dahua NVR4104-4KS2/L i run the same issue. The new firmware called DH_NVR4x-4KS2L_MultiLang_V4.003.0000000.0.R.240321 Even using ONVIF i failed to get video from the IMOU camera. Fortunately, i have old firmware backup (it was good idea to have one!) so i have performed...
Top Bottom