Search results
-
C
ivms-4500 Error Code 8200 - DS7608NI-E2 with DS-2CD3145F-I
Nope. Doesnt work in my case. I thought i found a soloution, but it doesnt work anymore. I actually live with the problem. Its a pity, but i can view the recorded streams in clear. So its ok at all... -
C
iVMS full screen issue
as you can see here: https://www.ipcamtalk.com/showthread.php/10329-ivms-4500-Error-Code-8200-DS7608NI-E2-with-DS-2CD3145F-I i have the same issue. Thought i got it in the end, but i have to say that the issue comes around :( I didnt found a soloution yet, but i cant believe that it has to be a... -
C
ivms-4500 Error Code 8200 - DS7608NI-E2 with DS-2CD3145F-I
Well, i found a soloution now. Works since 3 Days without any error. Its not 100% satisfying, but anyhow i can live view in clear. And its all about the stream settings! So, on the cam with V5.3.3 i had to set the bitrate to "static" and the max. Bitrate to 4096. resoloution remains 2560*1440... -
C
ivms-4500 Error Code 8200 - DS7608NI-E2 with DS-2CD3145F-I
Now I realize the misunderstanding^^ I got a DS7608NI-E2/A -> that means i use external poe injectors to power my cams. so all terminals (cams and nvr) are in one and the same network. well, as i wrote before the rtsp streams via VLC and the "onvif device manager" are available in full... -
C
ivms-4500 Error Code 8200 - DS7608NI-E2 with DS-2CD3145F-I
Well, got the same error now on the new cam. I really dont know what i can do yet.... Dont think its a router problem. i have a fritzbox 7490 and whether via wifi or 3G/LTE, i get the same result. So I factory reset the nvr and the cams, it worked for a while and then i get the error. After a... -
C
ivms-4500 Error Code 8200 - DS7608NI-E2 with DS-2CD3145F-I
I will starting to cry out. I got the error at midday again. So i didnt found a durable soloution :( Today the other 3145 arrived, but this time with V5.3.8 instead of 5.3.3. I installed it quickly and it works as it should (with admin account ;) :P ). i guess its maybe a firmware issue. Do you... -
C
ivms-4500 Error Code 8200 - DS7608NI-E2 with DS-2CD3145F-I
thats why I added a new user without rights. I had the problem before at a costumer that the nvr changes the motion detection settings from the cam all time, cause it absoloutly wants it ^^. So i had to add a new user without any rights so the nvr had no chance to change any settings in the... -
C
How to select 12mm lens size on DS-2CD2T42WD-I5 or DS-2CD2T42WD-I8
Dont know if its possible to change the lense as its a normal M12 lense mount. You might have a look at this: http://www.m12lenses.com/M12-Mount-Mega-Pixel-Lenses-s/21.htm -
C
How to select 12mm lens size on DS-2CD2T42WD-I5 or DS-2CD2T42WD-I8
You can order just ONE of these lens per model Yes IR range 30meters, 50meters and 80meters as its wrote here in the end: http://overseas.hikvision.com//uploadfile/image/10229_EFTPspec2SeriesR6%282X22FWD2X42FWD%29DS2CD2T42WDI3I5I8.pdf -
C
ivms-4500 Error Code 8200 - DS7608NI-E2 with DS-2CD3145F-I
I just uses the new user to make sure the nvr cannot change any settings on the cam. however when I see that this configuration works I will try to use admin user. but atm I have no more pleasure :P -
C
ivms-4500 Error Code 8200 - DS7608NI-E2 with DS-2CD3145F-I
I played a little bit and actually i got it as it has to be. What I did is -> I deleted the cam in the NVR settings. Now I factory reset the cam. Before i reprogram the cam in the nvr i configure it as mainstream: H.264 - 4MP - higher quality (not maximum) - 15fps, and substream: H.264 - 4CIF -... -
C
ivms-4500 Error Code 8200 - DS7608NI-E2 with DS-2CD3145F-I
Thank you very much for helping me. Factory Reste on the nvr didn't work, so I will try out the Factory reset on the cam tomorrow. Will it be multilanguage or will a factory reset set the cam back to original chinese? -
C
ivms-4500 Error Code 8200 - DS7608NI-E2 with DS-2CD3145F-I
its really surprising. Yesterday evening i wasnt able to show the clear view on the cam. But at this morning it shows clear view directly with no problems. A few hours later it wasnt working again :( I will factory reset recorder and re-program it... :sad2: edit: so i did factory reset and... -
C
DS-2CD3145F-I not connecting to DS-7108N-SN/P
You can put your laptop via ethernet cable diretly in the poe ports of the nvr. The 48V DC from the poe ports only activate when there is a poe functionable consumer pluged ibn. dont be scared. your laptop will work fine. after you put it in the poe port of the nvr you have to change the ip... -
C
NVR Substream is displayed as third stream, while substream setting is different
posted the soloution for the proplem in the other thread. Hope it will help you :) Of yourse you have to change back the protocol to "hikvision" instead of "onvif" -
C
Hikvision Motion Detection Event Settings Getting Reset
The problem is, that the nvr is "the boss" and resets the settings of the cam when connecting with admin account. What you can do is, to make a new user in the cam with no rights (but live view) and name it "user" for example. Now you must connect the nvr and the cam with the new username "user"... -
C
ivms-4500 Error Code 8200 - DS7608NI-E2 with DS-2CD3145F-I
Well, i havent had much time last days but as i looked at the app this morning and the morning before the cam shows in clear! But at afternoons i got the same error (8200). I updated the nvr but nothing changed :/. I put all cams back to hi-res as you said. I dont know what i could do next. In... -
C
ivms-4500 Error Code 8200 - DS7608NI-E2 with DS-2CD3145F-I
I did and restarted cam. But same error Code :/ i also tried to change the Resolution to 1080p. edit: i find out, that when i directly connect to the cam with the App ist works! So this issue is just when i connect over the Rekorder. :/ edit2: Got the same problem when i try to connect via... -
C
ivms-4500 Error Code 8200 - DS7608NI-E2 with DS-2CD3145F-I
Hi everyone, i have got a DS7608NI-E2 Rekorder (english Version) with 5 cams. One of the cams is a DS-2CD3145F-I with V5.3.3 bought from aliexpress. When i connect directly to the cam with the Internet Explorer it doesnt shows me a video, but the Plugin is activated. the Rekorder directly...