Search results

  1. H

    smart PSS Lite

    Thanks for your advice wittaj
  2. H

    smart PSS Lite

    Hi Wittaj, Confusion cleared with your attached screen shot. My original question was how do I setup intrusion remotely using SmartPss Lite. I can now acheive this so that's it for now.
  3. H

    smart PSS Lite

    This might help.
  4. H

    smart PSS Lite

    I open smart pss lite, go to devices and on the right hand side click on the world symbol that I pointed out earlier . You will then be presented with a login page where you can login again with admin and the password of the nvr. Sorry its the blue icon ok and when clicked I get a prompt...
  5. H

    smart PSS Lite

    I am using chrome
  6. H

    smart PSS Lite

    As I am old school coming from an eara that involved vacuum tubes etc I am new to the IP world. I presume that when I connect to the NVR using P2P, the NVR does some form of ''Forwarding'' to the camera.
  7. H

    smart PSS Lite

    So to summerise , I connect to the NVR and it does all the hard work for me. No VPN or port forwarding involved.
  8. H

    smart PSS Lite

    My understanding is that I access the NVR and it directs me to each cameras when I click the Web symbol on the devises page. Below is an example that shows up in my address bar. https://127.0.0.1:43000/?rtspport=43004&tcpport=430066#/index/EventConfig/ivsRule
  9. H

    smart PSS Lite

  10. H

    smart PSS Lite

    Ptp
  11. H

    smart PSS Lite

    see attached
  12. H

    smart PSS Lite

    My mistake. When using SmartPss Lite I was advised to go to devises and click on the web symbol on the right hand side. Give it time to load and ''he presto'' I now have access to the AI features. Problem solved.
  13. H

    smart PSS Lite

    I will post my findings when I speak with them tomorrow. Talk later
  14. H

    smart PSS Lite

    Thanks. I'll have a word with the distributor here in Ireland tomorrow. I can connect to all my sites that I exported over from the old version to pss lite but as there's no configuration tab I'm "Donald ducked"
  15. H

    smart PSS Lite

  16. H

    smart PSS Lite

    Thanks wittaj for your prompt response. My pss is old version and I was told to install the new light version but as far as I can see you cannot setup ivs/intrusion etc. It's very basic
  17. H

    smart PSS Lite

    Hi All, Am I correct in thinking that smart pss is no longer functioning and smart pss lite must be used from now on. I need to setup intrusion on an IP installation remotely.
  18. H

    Dahua PTZ problem from mobile app

    Yes. I was told by a sw guy that it gets the start pan command and the pan stop command isn't received at the desired time.
  19. H

    Dahua PTZ problem from mobile app

    I never got it sorted out. I believe its not just confined to Dahua. It's something got to do with the stop command getting lost and latency over a mobile network. I haven't tried it out with the DMSS app which is the current preferred app to use with Dahua. Sorry I don't have any better news to...
  20. H

    Dahua playback problem

    Exactly my thoughts on the problem. Even an old dinosaur like me would try the ping test. I am amazed by the number of guys in the trade that cannot carry out some basic fault finding practises. A lot of them need to go back to school and learn ''ohms law'', which will sort out a lot of faults...
  21. H

    Dahua playback problem

    Thanks looney2ns for your response. My understanding is that the fibre link is between the main office building which facilitates the NVR and a remote building where the CCTV cameras are located. The cameras don't share with the data network. All cameras are on one switch which is linked back to...
  22. H

    Dahua playback problem

    Hi All, I repaired a fibre cable about a year ago at a friends factory with my fusion splicer and got his camera link back running for him. He as since installed over 20 Dahua IP cameras ( some 4k I think ). The installer has recently stated that there is a problem with the fibre link as during...
  23. H

    Hikvision NVR 4.0

    Thanks Paul, I thought that the substream was required for remote viewing and split screen. Maybe this only applies to the nvr???.
  24. H

    Hikvision NVR 4.0

    Thanks Paul. This is worth checking out. I was on site and under pressure at other things at the time. I will be back on site in the next day or so. Do you mean the actual camera settings or the NVR setting.
  25. H

    Hikvision NVR 4.0

    Hi All, I recently replaced an old Hikvision hybrid type recorder for a 16 channel Hikvision NVR as the old machine only allowed 4 IP cameras in total and the customer wanted to add more cameras to their system. All went ok adding some new Hikvision cameras but when I tried to add some Zxtech...
  26. H

    Dahua PTZ problem from mobile app

    Hi All, I hope this hasn't been covered before. I had a look around and didn't se it on the site. My question is in relation to Dahua's full function IP cameras. When panning for example the camera will ''take off'' and continue to pan 360o and will not stop. I have seen it happen with both the...
  27. H

    Hello all from old guy

    :) Thanks guys. Us dinosaur's will show the young dudes how it's done.
  28. H

    Hello all from old guy

    Just came across site today. I come from an era when we fitted tubes in cameras and head bars in VTR's. How things have changed since the 70's. Yes there was CCTV back then, believe it or not.
Top Bottom