Search results

  1. E

    HIK "oem" DT347G-U Default IP

    Thru negligence I ended up with a HIK "oem" DT347G-U SNF55372004. It does not show up in SDAP , EZVIZ, OnVIF manager or Advanced IP Scanner or ARP. And the QR code leads no where. What is the likely IP address and PW for a virginal unit which appears to function with usual light behavior etc...
  2. E

    Motion does not send an SMS when triggered.

    Test trigger will send an SMS to my cell. Motion does not send an SMS when triggered. 'Trigger now' in Camera settings will initiate a red frame but not send an SMS. I need a few hints.
  3. E

    BI5 updates cams only initially

    I got a replacement ATT access box. BI5 only updates the 9 camera images when BI is started and never again until until BI is shut down and restarted. If a camera is restarted that image is gone forever, its color bars only. All cameras are connected POE Ethernet and in two different buildings...
  4. E

    Some cameras not in frame

    I have 9 cameras, but the frame only shows two. It used to show all 9 but something changed. In the past I reinstalled the missing cameras to get them all back. All cameras show on the status page and all cameras show just fine in U12and are arranged properly. What's the magic key sequence to...
  5. E

    Digital I/O causes BI4 to freeze

    I would like to hear from anyone using the BI Digitial I/O feature. Most particularly the Sealevel SeaDAC device. My win 10 i7 system with 10 ONVIF generic cams runs perfectly and forever with no issues until "Open Sealevel SeaDAC device" is checked in BI Options. System will then run for a...
  6. E

    External trigger BI4 camera recording ,Problem

    I have BI4.4.0.2 with 6 ONVIF cameras running on an I7. I want to trigger video recording using switch contacts feeding a Sealevel 120 POE. Switch contact closures causes the proper response on the SeaMax utility. When I go into the Digital I/O tab, check Open Sealevel SeaDAC device and click...
    • eeeeees
    • Thread
    • digital i/o sealevel eio trigger
    • Replies: 0
    • Forum: Blue Iris
  7. E

    IOT Interface Box, How to connect contacts to BI using an Arduino

    Attached is an article on how to connect external devices to and from Blue Iris. This project is an IOT Box. It will allow BlueIris to control things that may be connected to its relay contacts and respond to contact closures on things like motion sensors. The IOT Box communicates with BI...
  8. E

    BI4 Digital I/O Unresponsive

    My issue is that I cannot get BI (ver 4.2.9) to respond ( as in be Triggered) t0 digital inputs on the PC COM port. The response I am looking for is to put a red border on the target camera image. The same response you get when the 'Trigger now' box is ticked. When everything works I will use...
  9. E

    BI and Generic Camera compatibility

    I have four cameras three of which play fine with BI. The fourth camera is a GW-2071IP that identifies as a T38F006-ONVIF-P2P in ONVIF Device manager. Undoubtedly some sort of Chinese white box product. BI identifies the camera Make as Generic and the Model as RTSP H.264/MJPG/MPEG4. BI assigns...
  10. E

    Camera Siting Problem- I'm looking for how to deal with a bright light.

    The picture below is from my driveway camera. At night our car is in the drive and I want to be able to watch it. Just in front of the car parked in the street is a street light that is near the center of the cameras field of view. The camera is a HIK GW-2071. The light totally washes out the...
    • eeeeees
    • Thread
    • bright lights illumination issue
    • Replies: 13
    • Forum: IP Cameras
Top Bottom