Search results

  1. P

    which setting causes 5241E-Z12E blur with even slow motion?

    I also found numerically high iris settings do affect focus oddly with this model camera. I mentioned back in post #9 large iris short and long distance were in focus with mid distance at center of capture out of focus. Large iris reduces depth of field so would expect to lose long or short...
  2. P

    which setting causes 5241E-Z12E blur with even slow motion?

    Have same model camera. Capturing license plates at about 170-180 feet at about 30 degree angle. I had a problem. Plates would be in focus at right and left edge of view but always out of focus in center of capture. So moving plate would be in focus at shorter and longer distance at each edge of...
  3. P

    Difficult few days...

    Three very common A/C problems are 1) capacitor - if bulged it is bad can also check with capacitance meter 2) contactor (just fancy name for relay) - check coil where 24 volts goes for continuity and look that contacts are not melted 3) fuses - check continuity also check for tripped...
  4. P

    I have a network/PoE mystery on my hands

    Just a thought... On the hubs settings screen Status column possible speeds can be 10/100/1000 have you tried manually setting a slower speed? I have had long run that would drop out and others that would make no connection at all, after manually setting slower port speed I would get stable...
  5. P

    Worlds First Review - Dahua - IPC-Color4K-X / DH-IPC-HFW5849T1-ASE-LED - Full Color 4K Camera

    Did someone say there will be a tourette version of the video?
  6. P

    Long Distance Run Data Fails Quick Question

    Maybe the NVR can be set for longer data runs per port I have a Hikvision NVR that can set ports for slower but longer distance My longest run is about 700 feet with cat 6 cable I have also used a POE switch that can be set for short (100Mbps/100 Meters) or longer(10Mbps/250 Meters) run
View older results
Top Bottom