Search results

  1. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    I'll have to admit after changing all my cams to 750ms has almost eliminated my occupied alerts. I had just one since upgrading to 6.0.2.2. These two triggers were within the same minute and same cam, yet one got the dreaded occupied.
  2. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    Just to update everyone on the occupied alert issue. I have found that by going back to the bi-combinedv5 model and not using the primary model has almost eliminated all of my occupied alerts. The one garage cam that I forgot to switch models did have 4 or 5 and I think its due to having so many...
  3. Tinman

    Using a mask for motion detection but have AI analyze entire scene?

    or let the camera do the AI work and just select person. Assuming that cam has AI capabilities.
  4. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    Well, that got me thinking. I went to a couple of my cams that did get the occupied alerts and switched those 2 cams to bi-combinedv5 model and no primary. So far I have no occupied running this: Will let it run that way tonight and see what happens.
  5. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    I agree completely. My main BI system is a I7-6700k 16MB and I used to run CPAI on it ok but was limited to about 5-6 cams. That was using CPU, the onboard GPU would just bog down. With what prices are of video cards, I would spend that money to invest into a 12th gen I7 or newer with 32MB ram...
  6. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    Here is a good one, just had one on both systems and almost same time. Both should have been confirmed easily as a person. Also, there wasn't much other AI activity going on then as well. Now I am thinking down other ideas...camera? network? LOL Keep in mind, the AI did confirm me out there...
  7. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    Hmmm, I changed my demo machine back to 32 this morning and it uses the UHD onboard 770. So far I have over 175 alerts and NO occupied. Running 6.0.2.1 and using yolov8s 13 cams running AI. I run this on about all of them. Also, this machine is all motion only, no continuous and it...
  8. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    Well, some good news to report this morning. After changing my "max connects" back to 32 I had ZERO occupied alerts last night. At first, I thought I must not have had many cars go by, when I actually had more than usual. All 5 cams that I tested and have .dat analysis enabled did not have any...
  9. Tinman

    Natural Gas Generators

    Are those galvanized fittings for a gas line? Not recommended if they are. Nice gen though.
  10. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    so maybe the "max connects" could come into play. On my setup it's not uncommon for 4 to 5 cams firing almost the same time when I car drives around house. I had mine set to 4, but it was at 32. I'll try bumping it up again and test tonight. All of my occupied alerts are cars, and I have cars...
  11. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    No I don't think cleaning the registry helped, but I did it to both of my machines. During the day out of 150 approximately I only had 5 occupied alerts and I am not sure why they were not confirmed. I seem to get more after dark, but nothing like I was before I went to just ONE model and...
  12. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    look on page 103 of the help
  13. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    So back to my earlier question, do we need to list wildlife AND dog in the confirm box?
  14. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    Ok, here I deleted all the deepstack garbage and a lot of other stuff on my demo. Everything works great lol So my next step is to clean up my main one. Not one occupied alert as well on demo, but its only been up for a hour so far. Since I use no alpr I deleted all that as well. Everything...
  15. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    no, you need to click on and highlight the asterisk line.
  16. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    It helps if you highlight the entry that has the "*" beside it, then we know what image it actually used.
  17. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    One other thing I noticed while in registry. There seems to be a lot of old references to CPAI and deepstack. I'm going to clean that up, not sure if it will help, but that always has been a issue with BI, it tends to leave a lot of junk in the registry. Also note there it lists wildlife and...
  18. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    This morning after going back to just using the yolov8m model and doing a full system restart, my occupied alerts were very few. I still had a couple like the one I posted here: The * image it detected a bench and then it did see the car, but it remained occupied. Bench was still active in...
  19. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    Here are a few examples: The last one worked and all within 10min of each other. So, it appears by the * that it is marking an object "occupied" and then is no longer looking at any later images and why it does not see the car when it comes into the frame. Not sure if that is the correct way it...
  20. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    That would have helped, but everything was working great and I turned that option off. I now have it enabled on the 4 of my cams that are giving me these occupied alerts.
  21. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    After some further reviewing, I did set up a couple of my cams to use the delivery model, but could not get them to work. Other than just updating BI that was all I had changed. So just now I went in and tried to clear the delivery model, but BI would not remove it. Tried several times and...
  22. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    I am seeing these cancelled occupied alerts on several of my cams and appears they really started after going to 6.0.1.30 according to my log. this one is completely goofy.
  23. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    I just noticed when I checked my cancelled alerts I have some too. Not a bunch of them, but none the less, new to my system. 6.0.2.0
  24. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    You may, but it is not recommended at this time and they are not included the the model pack.
  25. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    You are correct! Thanks for the tip!
  26. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    Ah...maybe run animal along with yolov10s
  27. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    Not your answer, but I found the included yolov8s outperforms the ipcam-combined. It also detects my dog always as a dog instead of sheep or cat LOL
  28. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    I believe that you can use just Onvif as the trigger source, then the AI will confirm the alert to that trigger.
  29. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    First go to blueiris settings/AI and select which additional models you want. Then go to each camera and select the additional models: If you just want certain models out of your additional group of models check the box and specify which ones in the box. You must use the built-in YOLOv8...
  30. Tinman

    Blue Iris Version 6.0.1.24 Now Supports Custom Models

    Wow, very nice !
Top Bottom