Search results

  1. B

    Blue Iris WAN

    I figured it out. I had the wrong IP address entered in port forwarding
  2. B

    Blue Iris WAN

    My last hurdle to finish the install on a new router, cloud gateway or whatever you want to call it. Installed a UniFi cloud gateway ultra. I have every thing working as should except WAN on Blue Iris for our camera feeds. LAN and everything works good. I run through the Blue Iris remote...
  3. B

    Pulsating Circle on my topology

    You are so right!! I logged in another computer and sure enough the pulsating circle changed to the new computer....Thanks
  4. B

    STP Blocked Network Loop

    Well my STP error went away. It was something to do with one of my ports on a switch which I had a security camera connected to. How a camera could cause a loop error I don't know. Worse is I don't know what I did to fix it. The reded out port changed back to what it was suppose to be but the...
  5. B

    Pulsating Circle on my topology

    Hello all, On my UniFi network gateway topology I have one computer icon that has this pulsating circle on it. This is one of two computers I have hooked up to ethernet. Its like I have a "find me" option checked but I don't have that option. I compare settings with the other computer and they...
  6. B

    STP Blocked Network Loop

    This is good to know. Thanks for the leg work. I will definitely try this too.
  7. B

    STP Blocked Network Loop

    Thanks for the Reply, This is a good point. One question. I have everything set up, as I mentioned, the same as when I had the USG and everything worked great. Does the new gateway, I'm using now, contribute to this problem. I have everything in the same location as before. Also, after further...
  8. B

    STP Blocked Network Loop

    Thanks for your reply, The camera(s) is/are PoE and connected to a switch that is connected to another switch. They are not wifi. How I know the port is involved because on my topology that port was reded out with the same error message. So I went back to look at it and it is no longer reded...
  9. B

    STP Blocked Network Loop

    Update on the STP network loop. I discovered it is coming from one of my security camera ports (PoE). This particular camera is a different brand from the others but, it did not give me problems on the old USG router. So does anyone know why one camera and/or port cause a network loop?
  10. B

    STP Blocked Network Loop

    Good Morning all, As always I appreciate all the help I receive from the board. My UniFi USG router went out on me and find out they don't make them anymore as of 3 years ago and don't support them. So I thought I would replace it for whatever took its place. The UniFi Cloud Gateway Ultra is...
  11. B

    Unifi Network

    Hello All, I frequently will view my Unifi Network page that shows the Topology, clients devices, unifi devices, stats....etc. On my WiFi Insights selection it will show the performance of my network. I just noticed a "Environment Scan" selection next to the "Performance" selection. (I have...
  12. B

    Hikvision PTZ camera preset

    Thanks for the reply, My model is a Hikvision DS-2DE3304W-DE
  13. B

    Hikvision PTZ camera preset

    Hello all. I have one camera after I change viewing directions that always returns to a preset after a short time. I deleted all presets in both the camera and Blue Iris software. It will still always return to the same "preset". I have another PTZ Hikvision camera that I am able to view...
  14. B

    Another capture

    I first thou ght spider but there are no defined legs
  15. B

    What do you think this is?

  16. B

    Multiple posts of the same video recordings on Blue Iris

    Thanks for the advice. All good stuff. The first part I had as you directed already set. The second part I will go to school on soon. Here is what I just discovered by accident and may be the same accident that led me to my problem. When I was viewing and scrolling through the recordings list I...
  17. B

    Multiple posts of the same video recordings on Blue Iris

    Yes, the clips list. As you see there is the time duration listed for each clip. When I click on a clip in the list, for example, "Front Yard" shows a 1m00s clip. Once the video comes up it is a 45 minute recording. The red and green markers will be 1m00s as listed on the full 45 minute video...
  18. B

    Multiple posts of the same video recordings on Blue Iris

    I figured out what these symbols are. Correct me if I'm wrong. I think these are the record time duration that is indicated in the thumbnails. The problem I'm have is that I get a lengthy recording and it will post several times. Each time the same video posts the thumbnail will indicate like a...
  19. B

    UniFi Topology indicating a false(ghost) hardware icon

    Well TonyR, I took your advise and looked up a MAC. While viewing my topology, only this time, a ghost device appeared on my access point very briefly and by briefly I mean maybe10-15 seconds. I was able to capture the MAC and look it up. It came up as an Texas Instrument devise. Pretty sure we...
  20. B

    UniFi Topology indicating a false(ghost) hardware icon

    Hello all, On my topology, one of my switches (US-8-150W Unifi) will show, sometimes, one or two extra devices hooked up to it. The switch is already filled up with cameras and a access point to it and all of my ports are used except the two extra ports that are titled SFP. So why do I get...
  21. B

    Unifi Network Topology OCD question

    This is a curious OCD question about the topology display page on my Unifi Network. My hardware will display different, at times, on the topology page. For example, It goes from my router, to a switch and then it will display two computers I have ethernet(ed) off the switch then to another...
  22. B

    Unifi Switch configuration

    Hello all, I have a ubiquity US-8-150W switch I run my security cameras to. The switch has 10 ports and 1-8 are PoE. 9 and 10 appear not to be. On port 1 I am using it to connect the switch to another switch connecting to the modem. I want to add another camera and I am out of PoE ports. So my...
  23. B

    IE Tab

    Hello all, I use to view my IP cams directly with Microsoft explorer. Then I had to use the extension IE Tab. Now IE Tab will no longer allow me to view my cameras directly. Does anyone have and Idea what I can use or do to IE tab to get to work. I can log into the camera and everything is...
  24. B

    Blue Iris Calendar in the "clips" section

    Okay, figured it out. I read the posts again from the similar problem I had last year. I had done and been recommended to run the "Repair DB" option In the "Blue Iris Status " Icon under the "Storage" tab. Last year that did not work for me so I forgot about it. On this year's problem it worked.
  25. B

    Blue Iris Calendar in the "clips" section

    I have noticed something else. When I view the clips on each individual camera and just the clips for each camera will populate the red dot will come back. When I view all the camera clips where all the clips will populate then the red dot goes away. I had a similar issue last year and pin...
  26. B

    Blue Iris Calendar in the "clips" section

    Hello all, In the calendar option, when viewing clips, there will be a red dot for all the days that have a recording still available. I have my storage set to 900 GB and that will get me around a month of recordings. This morning, while viewing recordings, I noticed the last two days have not...
  27. B

    Blue Iris Updates Question

    On my Blue Iris software we occasionally get a pop up with software updates. You can select what you want then the software will do its thing and restart. Now, when you make your selection then click OK, nothing happens. The pop up will close and the next day it will be back asking for the same...
  28. B

    Blue Iris Clips Thumbnails Question

    When I pull up my clips and it populates the left side of my screen there is a number in the lower right hand corner in each thumbnail. There is also a light blue line marker at the bottom of each thumbnail that appear in different thicknesses and different locations along the bottom. Does...
  29. B

    Blue Iris Camera Settings

    I would probably just do a screen shot or "snip it" (window+shift+s)
  30. B

    Blue Iris WAN not working

    Hello TonyR, Thank you for your Reply. If you mean logging on to a browser and entering IP address of a camera to view then yes, I can view the camera. I can also view cameras on the BI app in the network. But once I leave the office/network I can not log in and view. I am 99.9% sure I...
Top Bottom