Search results

  1. AP514

    Advice on POE Switches

    Great deal where did you get them....?? EBAY ??
  2. AP514

    Advice on POE Switches

    I just ran 115ft / 35meters from house to Garage. The Fiber Cable is very thin and delicate IMO. I piggy backed the Fiber Cable onto other wire..I used the wire to attach the pull cable to. Unless your conduit has nothing in it. I would Piggyback the Fiber along with a wire you can put some...
  3. AP514

    IPC-HDW5442T-ZE New cam from Dahua :)

    I wonder how this will fair vs the 2MP - IPC-T3241T-ZAS at night ...
  4. AP514

    Advice on POE Switches

    If he has Free Conduit then 1 single or even 2 will work. If Not then Yup SFP for the win..you can run Fiber cable in 120v conduit from 1 building to another.
  5. AP514

    Advice on POE Switches

    Well, If you are putting all your Cams on 1 switch here is a deal for you...... older--NETGEAR 48-Port Gigabit PoE+ Ethernet Smart Managed Pro Switch w/ 4 SFP Ports. He wants $200ish but make a lower offer the item has been sitting for awhile...
  6. AP514

    Need help for new Network Cable type

    I would say most here are using Cat6..as far as already Crimped it depends on where you are running it..If you have access (connector will go thru what you need it to) then sure.
  7. AP514

    Epoe trench 750ft long

    Extenders only go about 100m(328Feet)..I would try it and see how it goes...Have 1-2 open spots for a water tight box in case you need extenders or what ever you go with.
  8. AP514

    Epoe trench 750ft long

    Seeing you are running extra out there... You might have to put in a Booster of some sort about half way. This is to keep the (Cat 6) Signal strong enough to not be dropping out all the time. or just do this type on both ends Just an example : Pricey but there are other choices out there...
  9. AP514

    can not get Dahua cam set up on BI network

  10. AP514

    can not get Dahua cam set up on BI network

    Here is a quick topography of my test setup.... Note** Switch not connected to the INTERNET (just says NET. Below) ALL VLANS on the Switch are untagged. No Default Gateways....on both laptops(Blank) So to recap I set up the laptop and Cam get into Dahua program.(Vlan 70) Everything working good...
  11. AP514

    can not get Dahua cam set up on BI network

    Well, at first the laptop was in the Factory IP range of the CAM and on another Vlan 70 ( Vlan 70 only has 2 ports-untagged)...once I got into the Dahua program. I changed the IP of the Cam to the IP range of the BI machine.(Then Saved the IP) Then Unplugged the Cam from the Switch and put it...
  12. AP514

    can not get Dahua cam set up on BI network

    I know I must be missing something easy here... After init install and setup of the New Cam I changed the IP on the CAM. (Static IP) I set up my Dahua cam thru my switch on say Vlan 70 (setup and test Vlan) to my laptop. .All works great. I have changed the IP settings for the Cam to...
    • AP514
    • Thread
    • Replies: 6
    • Forum: Dahua
  13. AP514

    Review-OEM IPC-T3241-ZAS 2mp AI Lite series Varifocal

    Hum..Wonder why this is happening...is there a setting in the Duhua set up that I should have checked or BI 5 for that matter ? More reading needed....
  14. AP514

    Review-OEM IPC-T3241-ZAS 2mp AI Lite series Varifocal

    Do you have to have a SD card in the Cam for it to retain settings ? I ask because the power has gone out here 2-3 times and I have to go in and Do a Factory reset to get the camera to work on BI5. Am I doing something wrong here..Missing something ??
  15. AP514

    Got this POE+ Switch-Want to Test- Ideas

    I did have a little bit of Noise at first. I figured it might being used.. But I put some 3-1(Blue Label)Oil on the Fan shafts and they are not bad at all. ((You can use just about any oil.) (Do not ever use WD-40)) Fan Lube was actually very easy to do..removed the screws holding fans. Peeled...
  16. AP514

    Ah. Making headway. All IP cameras on their own subnet/VLAN along with Blue Iris server. Able to still use UI3 through subnets.

    Good info in that PDF..Just did a quick look. I also have a L3 Switch GS728TPPv2 I sniped off Ebay for $53. Here is the thread on it...Got this POE+ Switch-Want to Test- Ideas
  17. AP514

    Ah. Making headway. All IP cameras on their own subnet/VLAN along with Blue Iris server. Able to still use UI3 through subnets.

    Well, just looking for some Free help...that is why we are here, To learn and Share........ I already am a watcher :)
  18. AP514

    Ah. Making headway. All IP cameras on their own subnet/VLAN along with Blue Iris server. Able to still use UI3 through subnets.

    Yup I can do Vlan routing.... but I Have to admit..I am feeling a little overwhelmed..ATM. Have ACL..... I know I can... just figuring out how is my issue ATM. Feel free to start a Conversation.... ;)
  19. AP514

    Ah. Making headway. All IP cameras on their own subnet/VLAN along with Blue Iris server. Able to still use UI3 through subnets.

    Wow..I am scratching my Head ATM..trying to get my Network setup... I got my Vlans set..Now trying to figure out how to get my BI PC to talk to 2 Vlans or be able to get to the net w/out the Cams being able to..
  20. AP514

    Is there a way to add more storage folders in BI?

    That is what I did( "Best Buy Sale") I got the same 3-12TB drives and Shucked them......
View older results
Top Bottom