Search results

  1. alastairstevenson

    DS-2CD2342WD-I Password reset

    That file - presumably from using the 'forgot password' button in SADP - is a reset request file that has to have a response from a Hikvision support system, it doesn't hold a password. If any of the cameras have firmware between 5.3.0 and 5.4.4 then you may be able to use this method to...
  2. alastairstevenson

    Advise needed, my Hikvision was hacked/pwned

    Yes, of course, i should be able to help.
  3. alastairstevenson

    Reconfiguring a Hikvision Doorbell camera to a new router.

    Dumb question, for which apologies : Did you consider configuring the new router base IP address and DHCP scope and WiFi settings to match those of the previous router, such that no changes to any of the connected devices would be needed?
  4. alastairstevenson

    DS-2CD1343G2-LIU Missing Advanced Network settings

    Which should work OK with MS Edge, though this depends on the version of firmware. For web GUI missing features, it's usually the case that native Internet Explorer, or even IE Mode in Edge, works best. What browsers did you test? The Webcomponents plugin? I'm pretty sure that only integrates...
  5. alastairstevenson

    Request: CN Firmware (3.0.x / 3.1.0) for DS-7616N-E2/8P to fix boot loop

    The file appeared to upload to the forum OK (Surprising as others have seen problems with attachments) but on checking later, the attachment does not exist. Check your DMs for a link to the file in Google Drive.
  6. alastairstevenson

    Blacklist in IP Cam config

    Suggestion - change the PC IP address to that of the whitelist, and update the confidential.
  7. alastairstevenson

    Request: CN Firmware (3.0.x / 3.1.0) for DS-7616N-E2/8P to fix boot loop

    It will be rebooting with a message in the serial console about a 'language mismatch'. Check your direct messages for a solution.
  8. alastairstevenson

    Hikvision password reset tool returns "device refused to process"

    The camera configuration file decrypted OK, see the direct message for the camera admin password that with luck is the same as the NVR admin password.
  9. alastairstevenson

    Forum attachment issues?

    How long approx is 'significant' ?
  10. alastairstevenson

    Hikvision ERI-K216-P16 – Bound to Previous User, TFTP Update Fails

    Sorry, but I don't know. I'm guessing if it's bound using the serial number, nothing will change.
  11. alastairstevenson

    Hikvision password reset tool returns "device refused to process"

    It seems the forum has got some persistent gremlins with attachments just now. Did you zip up the file?
  12. alastairstevenson

    Hikvision ERI-K216-P16 – Bound to Previous User, TFTP Update Fails

    That's not a process failure - it's actually a comment by the tftp updater tool that it had received a probe for ArecontVision devices. This is something the NVR does on startup, and it uses a similar UDP probe to what the NVR uses looking for the tftp updater on bootup. There are a couple of...
  13. alastairstevenson

    Hikvision password reset tool returns "device refused to process"

    Sadly, no. That looks like the 'password reset request file' produced by SADP using the 'forgot password' link to send to Hikvision. What version of firmware does SADP show for the camera? If between 5.3.0 and 5.4.4 then this URL may pull a configuration file without requiring credentials.
  14. alastairstevenson

    Hikvision password reset tool returns "device refused to process"

    That's for the NVR? If so, it's likely that the NVR admin password will have been used to 'activate' the camera, on that version of firmware. If the camera is connecting OK, and the firmware is newer than 5.3.0 and older than 5.4.4 then the Hikvision backdoor vulnerability should be available to...
  15. alastairstevenson

    T5442T-ZE replacement cable

    You might be lucky with the cable choices on AliExpress, maybe able to find one that has the same board connector as the original. I recently replaced a couple of Hikvision camera ethernet cables with ones bought on AliExpress that were the exact same as the original even down to the thread to...
  16. alastairstevenson

    Are you sure that's a Hikvision camera? From the label? Or maybe just from SADP? I believe that...

    Are you sure that's a Hikvision camera? From the label? Or maybe just from SADP? I believe that apparent model number comes from a Xiongmai 'Hikserver' function in the non-Hikvision camera running Xiongmai firmware. If it really is Hikvision - try this : Set your PC IP address to be in the same...
  17. alastairstevenson

    firmware original desse modelo (KP-CA103) dvr em loop

    Translation :
  18. alastairstevenson

    Hikvision NVR changes camera IP address when rebooted

    Do you mean it changes the camera IP address to be in the address range used by the NVR PoE ports, something like 192.168.254.x ? Is the associated NVR channel set to Manual mode instead of the default Plug&Play? That's usually needed when a camera is on the LAN as opposed to connected to an NVR...
  19. alastairstevenson

    DS-2CD2342WD-I Password reset

    Certainly not - this is one of those on-going threads ... The password for admin on the HIKVISION DS-2CD2342WD-I - 599392555 Freezer camera is Google2019
  20. alastairstevenson

    Request: SPI Flash BIOS Dump (Winbond 25Q128) for Dahua NVR4216-4KS2

    Are you doing an in-situ read with the NVR powered off? Or powered on? Do repeated reads give the exact same dump file?
  21. alastairstevenson

    Hikvision Emergency Firmware Recovery TFTP (2024)

    Dumb question - Hikvision devices probe for the tftp updater tool during the power-on process, well before they have booted up far enough for SADP to find them. Have you power-cycled the DVR while the tftp updater is running?
  22. alastairstevenson

    N48PBB

    Looks like it may be the 4-pin connector under the red label on your image. If so, connections will be like this : https://ipcamtalk.com/threads/hikvision-nvr-ds-7804n-e1-4p-bricked.45773/#post-423003
  23. alastairstevenson

    Hikvision KD8003 not visible in SADP when connected to NVR

    A Plug&Play connected camera on the NVR PoE ports would usually have the gateway set the same as that set for the NVR LAN interface. Strictly, 0.0.0.0 is an invalid value. Suggestion - set the KD8003 gateway to be that of the NVR PoE interface base address, usually 192.168.254.1 Then try the...
  24. alastairstevenson

    Hikvision KD8003 not visible in SADP when connected to NVR

    OK, suggestion to try : Pick the NVR PoE port you want to connect the camera to. In the NVR web GUI, note down the IP address associated with that port. It's probably something like 192.168.254.x With the camera powered up and connected to the LAN, and using the known admin password, use SADP to...
  25. alastairstevenson

    Hikvision KD8003 not visible in SADP when connected to NVR

    That's a little odd. Normally all the Hikvision-compatible devices on the NVR PoE ports would be seen by SADP.
  26. alastairstevenson

    Hikvision KD8003 not visible in SADP when connected to NVR

    The NVR PoE ports use a different network segment from than of the NVR LAN port, and by default they are not accessible from LAN devices. That is by design. An option might be to have the KD8003 connected to the LAN and to configure one of the NVR PoE ports to manual instead of Plug&Play and...
  27. alastairstevenson

    Hikvision DS-7608NXI

    A slight long shot - but what browser are you using? That can make a difference in what can be configured in the NVR and camera web GUI. If it's purely Edge, try enabling 'Internet Explorer mode' in the settings. If you've already done that , try with native Internet Explorer for the browser...
  28. alastairstevenson

    DS-2CD2342WD-I Password reset

    @jameder9 One more spam link and you'll be out of here, along with your posts. Please don't do this.
  29. alastairstevenson

    Hikvision DS-2CD2x32-I (R0) brick-fix tool / full upgrade method / fixup roundup.

    Here : https://ipcamtalk.com/threads/r0-ds-2cd2x32-brickfixv2-brick-recovery-and-full-upgrade-tool-enhanced.24343/
  30. alastairstevenson

    Hikvision NVR7208-12/P8 Firmware Required

    I've seen some instability with firmware NVR_K51_BL_ML_STD_V4.61.010_220527 on a DS-7608NI-I2/8P and I think there has also been mention of that a couple of years ago on here. The NVR tended to freeze or reboot when configuration changes were made. Via the serial console, I downgraded the...
Top Bottom