Search results
-
iVMS-4200 needs a different username or password?
Ok, might be firewall then. I had a similar issue when I upgraded to iVMS-4200 v3.1 Try this. Open the command terminal in Windows as administrator. Then paste the following at the prompt (right click>paste): netsh advfirewall firewall add rule name="Allow iVMS-4200 Port 8000 Access" dir=in... -
ds-kb6003-wip firmware
Perhaps now the common gateway interface needs to be enabled. PUT /ISAPI/System/Network/Integrate <Integrate><CGI><enable>true</enable><certificateType>digest/basic</certificateType></CGI></Integrate> Then try enabled ONVIF. -
ds-kb6003-wip firmware
Try set the certificate to digest/basic? What is the response when you try? PUT /ISAPI/System/Network/Integrate Body: <Integrate> <ONVIF><enable>true</enable><certificateType>digest/basic</certificateType></ONVIF> </Integrate> -
-
ds-kb6003-wip firmware
This is a helpful tool for checking ONVIF capabilities and commands. -
ds-kb6003-wip firmware
With the rest client you can enable ONVIF: PUT http://admin:[email protected]/ISAPI/System/Network/Integrate Body: <Integrate> <ONVIF><enable>true</enable><certificateType /></ONVIF> </Integrate> You will need a user account for ONVIF to work: PUT... -
ds-kb6003-wip firmware
I have no experience with the ds-kb6003-wip. Hikvision does have tools to update the firmware though. The Batch Configuration Tool will probably do it. I've never tried with a HIK doorbell but what happens if you amend and paste the following into your browser? I suspect it will return an error... -
ds-kb6003-wip firmware
My understanding is NPAPI plugins are no longer supported in FF and Chrome due to security risks. You could update your Windows 7 laptop to IE11 and load the plugin. Some users have reported Pale Moon works. http://linux.palemoon.org/ or MoonchildProductions/Pale-Moon -
ds-kb6003-wip firmware
V1.4.62_180809 is the latest. Use Internet Explorer 11. You will need Hikvision's WebComponents.exe plugin installed. Right click on the file and select 'Run as administrator' with all browsers closed. That will correct the issues with the webGUI. -
(R7) Hikvision DS-2DE4220IW-D firmware upgrade help needed
It's possible to force a firmware with TFTP but you run the risk of bricking the camera. I'd advise against it, unless someone on the forum has had success with the R7 CCC. -
iVMS-4200 needs a different username or password?
It doesn't sound like a firewall issue if you are getting 'Incorrect password'. When you first installed iVMS-4200 it prompts you for a super user account. Check that account has the same username and password as the NVR. Edit it to match the NVR credentials and delete the other accounts in... -
Generate health report for nvr
I'm not aware of any third party reporting tools for your requirements. The 9600 series has fairly comprehensive reports/logs for some of your queries via the webGUI. HDD health status for example: If your looking for an automated report with the queries you listed it wouldn't to be hard to... -
-
DS-2CD2x32 ONVIF not working properly
Your NVR probably needs CGI activated and a ONVIF account created. I believe it's under Network>Advanced Settings> Integration Protocol. Create a user admin, grant admin privileges and same password as admin login for the NVR. -
SOLVED: Do not upgrade to 5.6.0!!! Much worser exposure/focus performance
I'm in the same camp. Upgraded my G1 to v5.6.0 and can't downgrade. I bricked the camera with TFTP server trying to downgrade to v5.5.83 (transfer completed but after 30mins no confirmation). Eventually I revived the camera using Scot Lamb's hikvision_tftpd.py tool. It managed to upload v5.6.0... -
NVR losing Hik-Connect connection.
Long shot, if you don't come right with the above suggestions try lowering the MTU to 1428. -
NVR losing Hik-Connect connection.
Things to try (which model is it?): NVR on the latest firmware UPnP off? Try a different server litedev.hik-connect.com litedev.eu.hik-connect.com dev.eu.hik-connect.com dev.hik-connect.com -
Pole mount for DS-2CD2032-I
The Hikvision universal pole mount bracket can be sourced for around $17 on Amazon. We struggle to get them in South Africa so we use a local metal work shop to make something similar for about $8. -
hikvison ip cmera latest version v5.5.82_19200 i want to downgrade
After v5.5.0 they disabled downgrading to prior firmware I believe. I tested by loading v5.5.0 on my G1 series and it gives a mismatch error when I try load any earlier firmware. -
Hikvision AR324-8 DVR Chrome support
Running LocalServicesComponents.exe (the new plugin) and the highlighted below in play, FF and Chrome are finally fully functional. -
Is DS-7608NI-E2 / 8P compatible with H264+ ??
Your E series and my K series are similar but the firmware files are radically different in size. You could load the latest firmware for your NVR. Either way, please run the following from a tab in Chrome/FF (if you prefer to keep the responses private msg me)... -
Is DS-7608NI-E2 / 8P compatible with H264+ ??
I'm running an unofficial version firmware on my NVR which is giving me more options than than v3.4.98. I'll revert to your firmware and get back to you. -
Is DS-7608NI-E2 / 8P compatible with H264+ ??
It's likely you need to create a user next. curl -T ONVIF_createUser.xml http://admin:[email protected]/ISAPI/Security/ONVIF/users Body of ONVIF_createUser.xml: <UserList> <User> <id>1</id> <userName>admin</userName> <password>xxxxx</password> <userType>administrator</userType> </User>... -
Is DS-7608NI-E2 / 8P compatible with H264+ ??
ONVIF device manager should then see the RTSP streams. -
Is DS-7608NI-E2 / 8P compatible with H264+ ??
You should be able to reboot like this: Create a reboot.xml file. Contents of reboot.xml: reqReboot=true curl -T reboot.xml http://admin:[email protected]/ISAPI/System/reboot -
Is DS-7608NI-E2 / 8P compatible with H264+ ??
If you're up for it, let's try curl. Download curl for Windows. Extract the curl.zip file you downloaded to C:\curl Open a command prompt and navigate to the curl folder. Create a xml file (I use Visual Studio Code) in the curl folder called ONVIF_on.xml Contents of ONVIF_on.xml: <Integrate... -
Is DS-7608NI-E2 / 8P compatible with H264+ ??
Might be an issue. Are you on a Windows PC or Mac? -
Is DS-7608NI-E2 / 8P compatible with H264+ ??
Back in RestLet: PUT http://admin:[email protected]/ISAPI/System/Network/Integrate Body: <Integrate xmlns="http://www.isapi.org/ver20/XMLSchema" version="2.0"> <ONVIF> <enable>true</enable> </ONVIF> </Integrate> If you don't get a response untick Host -
Is DS-7608NI-E2 / 8P compatible with H264+ ??
Odd, you should get something. Try from a Chrome/FF tab: http://192.168.1.xx/ISAPI/System/Network/Integrate -
Is DS-7608NI-E2 / 8P compatible with H264+ ??
Let's start by trying to activate ISAPI/ONVIF/CGI on the NVR. Open Chrome and navigate to the RestLet Client. Once you have added it, login without an account. Select GET and paste this URL with your amended NVR password and IP: http://admin:[email protected]/ISAPI/System/Network/Integrate...