Anyone know what kind of alan/torq driver dahua uses to take the dom of there cameras? Yes i know they come with one but it would be nice to have a T handle version.
Yes it is a pain! lol
I'm gonna try some gasket lock and see if that will help, i may end up trying the PFA130-E there is more room in that box i think? It's really hard to get all the cables in the box once upside down and keep the gasket in place.
True that is why i wonder if the PFA130-E would allow a dome cable that is not in the center to be placed in the box.
It does not look like it would work unless your dome cam had the cable in the center.
Mine is very thin and there is no wood in between the soffit, the only wood is at the ends of the garage but that has flood lights mounted at every corner so i had the bright idea of just cutting a 2x4 and put in between and mount a round gang box to that then use a round cover plate drill...
Will both of these fit the same camera? My camera only shows the PFA137 for a Accessory.
My PTZ dome cable is mounted towards the side like in this picture.
The newer model is the one that has wifi and a mic because other wise i can't see any change?
Model # DS-2DE2A404IW-DE3W
old model that leaks? DS-2DE2A404IW-DE3
Anyone have a list of there Region codes?
Looking to buy another PTZ and they have UE and T in the part # and GN ant the end.
for example.
SD22204T-GN
SD22204UE-GN
22204UENI new model i think.
I've been using a Dahua SD22204T PTZ it works fine but has no IR, i may just buy another one since it's compact and has the focal range i want. It's a few years old.
Anything with a dome and IR seems to be bad at night anyway with the halo affect. Most all my cams are turrets.
Wondering if any one has ideas on how to install a dome cam under the eave in the soffit.
There is no 2x4 going across.
What i have been doing is cuting a 2x4 the width of the soffit and mounting it to that.
I have a older netgear router i could use if i can remember how setup two routers on the same network.
I think on the netgear i would assign it a IP and turn off DHCP, plug it into my switch for the internet.
The wireless can't be that bad i have one of these cams at another location for a few years now and have zero issues like i'm seeing. Mine will drop out completely over time until i reboot the router then work fine for a while.
Try a house on a concrete slab with half a attic.
I have 4 Hikvision DS-2CD2442FWD-IW wireless cameras and they loose connection every 20-24 hours or at random times rebooting my router fixes the issue for a day. Rebooting the cameras seems to make no difference,
My router is a Synology RT2600AC that is up to date each camera has a static IP...
Anyone know what the difference in these two are besides the obvious 4MP, 5MP only difference i see if the newer model does H265
There is also DS-2CE38D8T-PIR that is a 2MP version.
jimbo123 that is what it was! I forgot all about that setting when i did this a few years ago. Wonder why they don't use the video and audio by default.
Thanks!! :)
ONVIF GetSystemDateAndTime
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
Cantonk port 34567?
RTSP port open?
RTSP port detected!
Done
I bought a Hikvision DS-2CD2442FWD-IW it is using V5.5.82 build 190220, i can not get the audio to work. I have two other DS-2CD2442FWD-IW using a older firmware (V5.4.4 build 161125) and the audio works.
In the camera settings i'm using
G.711ulaw
In BI5
Audio path is blank
format is set to...
Was using hik 4mp Cube cam but it died after 2 years use. Are they still the best for under $150. I still have two more of them going strong.
needs to have mic/speaker built in as well for indoor use.
Thanks
Using the newest BI app on IOS 13 along with BI 5.0.6.10.
When you use the BI app the cameras will not show a live feed. Sometimes it does but takes a few min to show. It does not seem to matter if i view them remotely or locally. On my PC they are all shown just fine.
Any ideas?
Is there a way to turn off alerts for one camera remotely using the BI app? I have one camera set to send me SMS pics that i would like to turn on and off remotely without disabling recordings.
Would you be safer if your collection of IOT devices had there on network? Like another router, i have a netgear nighthawk collecting dust my current router a synology is working fine.
My recordings have been disappearing in a few hours through the day the record size limit was set to 4GB.
I checked the log it seems BI was deleting them even though my hard drive is no where close to full i guess it goes by the set limit of 4GB
I looked in the BI folder (New) where the clips...