Search results

  1. B

    BlueIris lost connection to all cams

    Yes I would say that if this only happens once in several years you could easily just live with it, but that is up to you! The current release is "5.9.9.14"; your version "5.3.0.3" was released on "Jul 13, 2020", there have been a lot of changes to BI since then, I am not sure if it would be...
  2. B

    Blueiris setup with port forwarding issues- need some help

    The wireless adapter DHCP setting would be a setting on the BI PC/Server, you would have to go into the properties for the adapter to see how it is set, to be honest running all of this over wireless is not particularly good as you may suspect! Just because the system has been stable is not an...
  3. B

    Blueiris setup with port forwarding issues- need some help

    There is a setting in BI that you probably want to check for each camera, open the camera settings, go to the video tab, click the configure button and check if the box for "Skip initial MAC, HTTP, DNS reachability test " is checked if so then uncheck it for all your cameras, this setting can...
  4. B

    Blueiris setup with port forwarding issues- need some help

    Sorry I missed that detail in you original post, how are the cameras connected to the BI PC, do you have more than 1 NIC in your PC or are all the cameras wireless also? you mentioned that you wanted to get the cameras working with POE, are some of them wireless connected or connected to...
  5. B

    BlueIris lost connection to all cams

    What version of BI are you using, there have been a few versions that have had issues with memory leaks some time ago, but I have not read any reports lately, is your system set to do automatic updates, if so I would turn off that feature and stick with the stable release's?
  6. B

    Blueiris setup with port forwarding issues- need some help

    Quote "My system is functioning fine - locally and remotely" So if the BI system is not plugged into your router, how is it currently working for remote access if it has no connection to the internet? Perhaps you could explain a bit more how it is currently connected, do you have 2 nics in the...
  7. B

    BlueIris lost connection to all cams

    Did you happen to look at task manager to see what was using all the cpu resources, its really hard to speculate as to what caused the problem after the symptoms are gone with out a few clues!
  8. B

    No Signals, Failed to Connect

    Have you excluded the BI folders from the AV scanning etc.
  9. B

    Hardware and OS to start with

    That is a big question to ask, what budget are you thinking, as cheap as possible or a good high end system? Are you planning on using a Nvidia GPU or just use .NET for CPAI and just use the CPU? I would run windows 11 bare bone as you will need better hardware to virtualize windows 11 with the...
  10. B

    Dahua IPC-HDW4631EM-ASE wont alert or trigger people walking in the red lines in picture at night only ( ok during the day )

    Probably nothing to do with your issue, but is this camera a PTZ, I see that you have "Extend trigger with PTZ movement" checked? If people are walking to the right of those trees, I would think that it is going to be hard to detect them at the very edge of the cameras view (Just my thoughts)!
  11. B

    No Signals, Failed to Connect

    Do any of these method work for you? https://www.elevenforum.com/t/change-network-location-to-private-public-or-domain-in-windows-11.955/ Are you running a third party AV software package, if so then it may have a setting that changes it
  12. B

    UI3 help - can't access

    The certificate that BI was using has probably expired, if you have a support contract I believe that you will have to update BI to get a newer certificate that has not expired. (I do not use any apple products, but I recall reading about this issue on one of the BI forums).
  13. B

    No Signals, Failed to Connect

    Are the cameras connected Ethernet 2 if so it should be set to "private network", to ensure that the firewall does not interfere with communications to and from the cameras. I presume that all your cameras and the NIC are set to static unique IP's or is there some sort of DHCP server on the...
  14. B

    Face detection not working

    I don't use face recognition, but would you not need to load the Face Module in CPAI if you wanted it to work, just a guess!
  15. B

    No Signals, Failed to Connect

    Is the network functioning from the BI PC? Have you checked to see if the link lights are on for each active port on your POE switch, can you ping the cameras, if so can you log into the cameras web pages?
  16. B

    Assistance with CodeProject 2.8 Setup

    CPAI is actually at 2.9.5 now!
  17. B

    Code Project AI 2.9.5 detect_adapter.py error

    Mine show 2.9.5
  18. B

    Code Project AI 2.9.5 detect_adapter.py error

    OK I tried again, I uninstalled the failed install of YOLOV8, verified that the appsettings.json setting was set to "ModuleInstallTimeout": "20:20:00", stopped the "CodeProject.AI Server" service, verified that the folder "C:\Program Files\CodeProject\AI\modules\ObjectDetectionYOLOv8" was not...
  19. B

    Code Project AI 2.9.5 detect_adapter.py error

    MikeLud1, I edited the file, but when I re run the setup program it just replaces it, how do I run the install process without it replacing the edited "appsettings.json" file OK I figured out how to reinstall the YOPLOv8 module, but when I try to reinstall I get a message "Response timeout. Try...
  20. B

    Code Project AI 2.9.5 detect_adapter.py error

    Thanks MikeLud1, I will give that a try, the internet speed is only 5 Mbps max, it's out in the boonies on a slow DSL link!
  21. B

    Code Project AI 2.9.5 detect_adapter.py error

    I have installed CPAI 2.9.5 on two systems running Windows 11, one of them works fine with no errors, the other has errors when I try and start any of the following modules YOLOv5 6.2 and YOLOv8 the error is the same for all of them. Here is the excerpt form the install log for both modules...
    • Bruce_H
    • Thread
    • Replies: 13
    • Forum: AI
  22. B

    Trying to connect - Dahua Camera - To Blue Iris

    Can you login to the camera directly on it's internal web page? Perhaps you could answer the questions that @wittaj asked above! We need a bit more info if you want more than a wild guess!
  23. B

    Assistance with CodeProject 2.8 Setup

    Uncheck the "Auto start/configure", you don't need it and it may cause issues! You are trying to capture everything in the objects field, I would suggest that you pare it down to just what is of interest, do you really want to identify a boat, elephant, zebra etc. on your street! You have...
  24. B

    CodeProject.AI Version 2.9.0

    Do you have "CodeProject AI" installed and running? If so then try this, Open the Settings "Gear Icon" in BI, click on the "AI" tab, click on the light blue "Open AI dashboard" url link. You should now see the screen that MikeLud1 shows in his reply above!
  25. B

    Blue Iris 6.0 coming?

    Since you would get 1 year of free upgrades with the purchase of the license and It says in the recent email about version 6 that anyone with "Active maintenance" will get Version 6. I would say that you would get the upgrade any time in the first year of purchase, after that you would have to...
  26. B

    quick way to see something from two minutes ago via iOS app

    That would require that the camera in question is set to record all the time would it not?
  27. B

    Blue Iris Instant Crashing

    I believe that you will need to add the desktop experience, or something like that, I have not used server since I retired from my IT job over 15 years ago!
  28. B

    Need to replace old Axis companion with possibly BI

    Yes they can! Not sure if there is a limit on the number of groups that a camera can belong to?
  29. B

    Need to replace old Axis companion with possibly BI

    If you set up the viewing stations using the UI3 web client and configure the areas to be monitored with camera groups, I am sure that you can get what you want, you will likely need a reasonable good PC for the main BI software, the other PC's don't need much as they are just viewing the UI3...
  30. B

    Gray frames on main stream recording

    The video display in a virtual machine might behave different than on a physical computer, and BI may also behave a bit differently on virtual hardware than it does on a physical machine.
Top Bottom