Search results

  1. J

    Is it normal to heave two IP entries for the NVR?

    The plan is to reset and start new to eliminate anything I possibly made a mess of. For some reason, I thought each camera had to be initialized individually by itself, but it looks like that is not the case
  2. J

    Is it normal to heave two IP entries for the NVR?

    Makes sense. I'll have 3 LPR cams
  3. J

    Is it normal to heave two IP entries for the NVR?

    I'm using 2 Dahua NVR5216-16P-4KS2E NVRs, so I theoretically have space for 32 I believe
  4. J

    Is it normal to heave two IP entries for the NVR?

    On to cameras. If the cameras are reset, do they need to be initialized through the camera GUI stand alone, or can you connect them to the NVR and they get the relevant data from the NVR (password, location, IP address, etc.)
  5. J

    Is it normal to heave two IP entries for the NVR?

    Ok, so here is what I have. Moving cameras from the Lorex NVR to the 2 Dahua NVR5216-16P-4KS2E NVRs. I will have 18 cameras to assign and organize into a logical flow and order. My thought is to organize the order by camera location in a counterclockwise direction. I'd like to split the camera...
  6. J

    Is it normal to heave two IP entries for the NVR?

    Ok, time to start the process of moving over to the Dahua NVR(s). Should I start a new thread?
  7. J

    Google.com Vulnerability that bypasses anti-virus

    And unfortunately, there isn't too much we can do about it except use common sense practices. You realize most of us are just along for the ride, no go pedal, no stop pedal and no signaling to get off on the next stop, because this is a limited NON-stop run. Can't worry about everything, you...
  8. J

    The Typical picture of a Perp on Nextdoor-type Apps with Consumer Grade Cameras like Ring, Nest, Arlo, Canary, Wyze, etc.

    Yeah, because digitally zooming in until you can count the pixels will help. Reminds me of early 8-bit graphics, except I don't think this would qualify for two-bit graphics
  9. J

    SD5A425GA-HNR detects cat ??

    My HDW5231R-Z 2mp camera puts a green box around our dogs whenever they are in view of the camera in the backyard. The green box goes wherever they do
  10. J

    Is it normal to heave two IP entries for the NVR?

    I thought I was being careful. Didn't want to inadvertently post info I shouldn't.
  11. J

    Is it normal to heave two IP entries for the NVR?

    Sheesh, you don't know until you know. My intentions were good. Sometimes I'm stubborn in my process By the way, when I initialized the Dahua NVR after doing the updates, I chose NOT to enable P2P. How do I enable it to use the DMSS app?
  12. J

    Is it normal to heave two IP entries for the NVR?

    I can change all the passwords from the camera GUIs, but the port number situation may be another story What is the port number used by Dahua NVRs? And can the cameras be reset from the GUI? Like, can I disconnect each camera from the Lorex NVR and connect them directly to my laptop one at a...
  13. J

    Is it normal to heave two IP entries for the NVR?

    I think I might be procrastinating because I am trying to setup all the cameras before the switchover. I know how to access the live view from my phone to align the cameras as I install them with the Lorex Cloud app. Along with the installation of the NVR, every camera has a different...
  14. J

    Is it normal to heave two IP entries for the NVR?

    I see. I wonder why the 192.168.XX.108 is an IP address on the device list as it is not in the IP range of the network. The 192.169.XXX.XXX IP address for the same NVR is. And it's not 192.168.1.108. The 3rd set of numbers is not 1
  15. J

    Is it normal to heave two IP entries for the NVR?

    The 192.168.XX.108 is a weird entry as it is not part of my LAN. Could it be the default IP of the device? Or maybe part of the way the device connects to the Lorex provided DDNS?
  16. J

    Is it normal to heave two IP entries for the NVR?

    Yes. The 35000 port appears as part of the NVR device info, so maybe it's part of the DDNS Lorex provides?
  17. J

    Is it normal to heave two IP entries for the NVR?

    Just thought I'd be careful as I don't want to give any information away
  18. J

    Is it normal to heave two IP entries for the NVR?

    All cameras are connected directly to the NVR
  19. J

    Is it normal to heave two IP entries for the NVR?

    If you notice, the first entry in the top list is the correct IP series (192.169.X.X) and the 11th entry is not part of my LAN IP series (192.168.X.X). Is this the default address? If so, why would it be listed as well as the one being used for my LAN IP series?
  20. J

    Is it normal to heave two IP entries for the NVR?

    Just noticed today that there are 2 entries in the device registration page for the NVR, with two different IP addresses. Is this normal? I don't recall seeing that before
  21. J

    Teaser Info and Mini Review - Empiretech B52IR-X3 Triple Lens Camera

    We have 4 of them
  22. J

    Teaser Info and Mini Review - Empiretech B52IR-X3 Triple Lens Camera

    I tried that, cause I saw that here somewhere on the forum, but when I turn off the filter, I get a lot of background hiss.
  23. J

    Teaser Info and Mini Review - Empiretech B52IR-X3 Triple Lens Camera

    I kinda figured it was added by the forum
  24. J

    Teaser Info and Mini Review - Empiretech B52IR-X3 Triple Lens Camera

    Noise filter is on, and MIC is set to 100. The sound is weird on this camera, certain sounds are reproduced ok, and others seem to be filtered out. During the day when the pool pump is running, you can hear the water spill over the spa, but when the A/C kicks on, it's normal at first and then...
  25. J

    Teaser Info and Mini Review - Empiretech B52IR-X3 Triple Lens Camera

    Did you add that link or did the forum do it automatically? I know sometimes you type certain words and the forum creates a link automatically to Amazon or eBay
  26. J

    Teaser Info and Mini Review - Empiretech B52IR-X3 Triple Lens Camera

    That's the plan. On the right side of the camera
  27. J

    Teaser Info and Mini Review - Empiretech B52IR-X3 Triple Lens Camera

    It needs more light and lower gain. The darker edges have a hard time. I was off on the gain, gain set to 0 - 60. Exposure is 0 - 7
  28. J

    Where to install cameras and what focal length

    I don't understand why you keep mentioning the Z4E, I'm talking about the B54IR-ZE (no 4) which is the bullet version of the T54IR-ZE turret you mentioned with the exact same variable focal lengths. I'm saying that the bullet versions typically have 4 IR LEDS versus the 2 IR lights on the...
  29. J

    Teaser Info and Mini Review - Empiretech B52IR-X3 Triple Lens Camera

    Attached is a screenshot of one of my 2mp cams at night. Exposure is 0 - 7, gain is 55. I think it could use another D20 or even a D10 on the right of the camera
  30. J

    Where to install cameras and what focal length

    He said he purchased a Z4E which is too zoomed in for him. A B54IR-ZE is a 2.7mm - 12mm variant which would allow a wider FOV I only mentioned the B54IR-ZE as it has 4 IR LEDS vs the 2 on the T54IR-ZE, which should give a bit more light in low light areas
Top Bottom