Search results

  1. ARAMP1

    Anyone here move from Smartthings to Hubitat?

    I ended up switching everything over to Hubitat and am generally more happy with it compared to SmartThings. I ended up picking up a Home Assistant Blue ODROID N2+ that I've connected to my network but haven't set it up. Kind of dreading it LOL.
  2. ARAMP1

    how do you isolate cameras from the inetent?

    Only the cameras are in the blocked IP range. The Blue Iris computer is outside of that range and has fairly full internet access.
  3. ARAMP1

    how do you isolate cameras from the inetent?

    It's pretty easy in pfSense but I may have made it a little more complicated than necessary. I have a VLAN setup where only my cameras and Blue Iris machine are members...VLAN30. I set up an alias for an ip range 192.168.30.10-192.168.30.100 called "CAMERAS". When I get a new camera, I give...
  4. ARAMP1

    VPN Primer for Noobs

    I ended up setting up wireguard and it works like a champ. This guy Christian McDonald was just playing around with wireguard and making it better and was eventually hired by pfSense to develop wireguard. I watched his channel to help set mine up.
  5. ARAMP1

    10Gb Uplink/1 Gb POE+ ports

    My home network is 10GbE, so I wanted a couple switches that had 10GbE uplinks. I know there's a lot of hate for Netgear around here, but I went with their ProSAFE S3300-52X-PoE+. It's a 48-Port Gigabit Stackable Smart Switch with PoE+ and 4 10G uplinks. I bought them used on ebay for under...
  6. ARAMP1

    Hikvision colorvu with nvr disable Led

    Pretty sure you have to go into the camera interface Configuration -> System Settings -> External Device and turn off the "Enable Supplement Light"
  7. ARAMP1

    A New Doorbell

    Not disagreeing with you at all, however how is it any different than having Ring connected to the internet? At least a company like Dahua will make a better quality product I'm hoping. My Ring Elite is a $500 piece of shit.
  8. ARAMP1

    A New Doorbell

    Is it wired?
  9. ARAMP1

    Issue with 5.5.1.18...How To Inspect The Logs

    More info for sure, but still not sure what it would point to.
  10. ARAMP1

    Issue with 5.5.1.18...How To Inspect The Logs

    There are only log files from after the crash. Nothing from before is there. I'm guessing it was deleted in the crash or I have something set wrong.
  11. ARAMP1

    Issue with 5.5.1.18...How To Inspect The Logs

    Thanks. Added %day. Error Logs don't really say anything that I can see.
  12. ARAMP1

    Issue with 5.5.1.18...How To Inspect The Logs

    The file only goes back to when I restarted Blue Iris. That's why I think I probably have a setting wrong. Nothing from before it shutdown is showing.
  13. ARAMP1

    Issue with 5.5.1.18...How To Inspect The Logs

    For some reason, 5.5.1.18 is shutting down randomly. It seems to happen every 24-16 hours. I'm going to roll it back to 5.5.1.17, so I'm not too concerned about the system, but I’d like to troubleshoot a bit and look into what might be causing it. When I pull up the logs file, it only goes...
  14. ARAMP1

    A New Doorbell

    I have POE going to my doorbell. Currently with a Ring Elite and looking for better options. Doubt I'm alone in this.
  15. ARAMP1

    Alerts Showing Then Dissappearing

    Okay, storage seemed to be the issue. I deleted all the files older than 6 months and it seemed to have worked. So I have another issue. I have an alerts file that is storing jpegs from this one camera. Why is it only storing images from this one camera? ETA: Disreguard...it seems like a...
  16. ARAMP1

    Alerts Showing Then Dissappearing

    Looking at that now. Just to confirm, if I have continuous+alerts, this is telling me that both continuous recording and alerts recording is stored in the Y-Storage disk?
  17. ARAMP1

    Alerts Showing Then Dissappearing

    Well, I deleted and re-added and it's still doing it. I turned DeepStack off on the camera and it's still doing it. There's got to be some setting somewhere that I'm overlooking that is doing it.
  18. ARAMP1

    Alerts Showing Then Dissappearing

    I did it and it does burn/highlight the label in the alert section and then it deletes it as before. Might try to delete the camera and re-add.
  19. ARAMP1

    Alerts Showing Then Dissappearing

    No.
  20. ARAMP1

    Alerts Showing Then Dissappearing

    I am running DeepStack. I have the box checked the box "Fire on alert and on reset actions only when confirmed" if that's what you mean. But I'll show a car at 93% and it'll still be gone in a few seconds.
  21. ARAMP1

    Alerts Showing Then Dissappearing

    The camera will show that it's being alerted when triggered with motion as I've set it up. The red box will be around the camera and the clip will show up in the sidebar on the alerts. The clip will stay there for about a minute then disappear. I'm sure there's some setting I have messed up...
  22. ARAMP1

    VPN Primer for Noobs

    Thanks for posting. I forgot about wireguard. Just downloaded it and I'm going to try it out.
  23. ARAMP1

    Blue Iris Updates - Official Thread

    Alerts are working for me in the console, UI3 and the android app.
  24. ARAMP1

    5.5.1 - September 23, 2021

    @Buxton I'm running an i9-9900K and have noticed increased CPU usage too. Things like just opening UI3, without any motion going on, will sometimes spike it up to 50% when it normally wouldn't even be noticeable before.
  25. ARAMP1

    5.5.0 - September 13, 2021

    Okay, I see how to create a new group by using the above method. But, how does one add a new camera to an existing group? I think the workaround now is to just create a new group and add all the cameras to it, old ones and the new.
  26. ARAMP1

    VLAN- AD110 Doorbell

    I have my ring doorbell on a separate VLAN with other IoT things (thermostats, etc). It's all about the rules you use to separate the VLANs. I'm using pfSense and it's fairly easy.
  27. ARAMP1

    New Blueiris camera box suggestions

    I used an I9-9900K in my build before substreams was a thing. I think at the time of my build I probably had 18-19 cameras. Most were 4K and I was constantly running around 27-30% CPU usage. After enabling substreams, I'm normally showing between 0-2% with now a total of 24 cameras. If I had...
  28. ARAMP1

    How do you guys keep track of your IP cams, passwords etc?

    I have all of my cameras set to a static IP address in pfSense. There is a place on the Static Mapping page for hostname, description, and where I can save a password. I also have all of my IP addresses organized by area. Front Door cameras are 192.168.X.10-20. Driveway cams are...
  29. ARAMP1

    Ambient Weather Station and Weather Cam (IPC-T5442TM-AS) live happily together!

    Got any pictures of how you mounted your weather station?
  30. ARAMP1

    Ambient Weather Station and Weather Cam (IPC-T5442TM-AS) live happily together!

    I'm looking at adding a weather station to the house and would like to add one or two small cameras to it. How's it been working out pointed up like that?
Top Bottom