Search results

  1. S

    Hikvision oem / clone - Frame rate drops in low light

    Picked up a cheap 4k ptz cam that seems to be a Hikvision h5 OEM most likely. I'm set for 15/1 FPS on main and substream but I'll occasionally notice in blueiris it drops to 12/.8 I suspect it's happening during lower light to try and brighten up the image, but I'm stumped trying to figure out...
  2. S

    Just switched from CPU to TPU - cpai 2.8.0, BI

    I guess not. I got caught up in numbers. Not like I need realtime AI for my usage. Most alerts I don't even look at until the next day. The only timely ones are stills sent via pushover while we're in away mode. But no real harm in that being delayed a few seconds. I gave up on the...
  3. S

    Just switched from CPU to TPU - cpai 2.8.0, BI

    Anywhere from 800-1500ms.
  4. S

    Just switched from CPU to TPU - cpai 2.8.0, BI

    Man if that's the case I'm so disappointed for wasting money. Some of these detections are beyond useless. Car drives by, it's not detected but 20 or so people are, where there's nothing resembling a person. Hopefully someone can chime in with a tweak or setting to try.
  5. S

    Just switched from CPU to TPU - cpai 2.8.0, BI

    Running blue iris with default ai settings in config. Cams analyze a few images per trigger only looking for a handful of objects (person,dog,cat, car, etc) Since switching to TPU (TF lite) processing is waaay faster but accuracy has dropped. I'm getting a lot of fairly confident (60+%)...
  6. S

    end trigger if not re-triggered within - short clips

    I'm waiting to hear back from Ken, but I think I may have found something. If I do a trigger now, on a cam with a 20s break time I expect to see a 20s alert clip. However I get 3s. In the log I see the camera trigger, and about 3 seconds later the alert is canceled by AI. That's fine, but...
  7. S

    CodeProject.AI Server ver 2.8.0 install issue?

    I just gave it another go. I found the .asp net package missing and installed it then got a different error. Found a link in event viewer that we need .net 8.0.11. Installed it and I'm good to go now!
  8. S

    CodeProject.AI Server ver 2.8.0 install issue?

    I'm in the same boat. I was running 2.6.5 just fine and decided to upgrade. Now it installs, but the service will not start. No matter what I can't get it working again. And I can't find 2.6.5 to roll back to. :( edit, found 2.6.5. Trying to roll back now...
  9. S

    end trigger if not re-triggered within - short clips

    Interesting. I think I've run into this before actually chatting with support. Not about the trigger time issue, but something else now that I'm thinking about it. I sent support an email about this one to see what they say. But I'm curious about your registry settings. More to verify...
  10. S

    end trigger if not re-triggered within - short clips

    I don't have blackout on. The blacked out areas are areas not inside of a motion zone. I am running codeproject, but nothing in the logs for that one specific example I shared. There were two triggers and two clips. The first one was just the headlights of the car, then the second trigger...
  11. S

    end trigger if not re-triggered within - short clips

    bump
  12. S

    end trigger if not re-triggered within - short clips

    I've been trying to wrap my head around this for awhile. One cam for example I have end trigger if not re-triggered within set to 20s, and max trigger time to 120s. I'm using zones and hotspot for motion. I can't figure out why my clips/alerts on some of these are coming up so short. I...
  13. S

    Onalert action with ONVIF event

    Just setup a reolink doorbell, and all is working fine. I have onvif events setup that triggers on "visitor" which is the button pushed. I see in the logs that the onvif trigger, triggered the camera but I cannot get the event to fire. I'm trying to send a pushover notification when someone...
  14. S

    CodeProject.AI Version 2.5

    I'm having the same issue with .net going to lost contact. Did a full clean install. Despite showing lost contact, it does seem to be still working however. IIRC earlier versions had that cosmetic bug too.
  15. S

    Yolo v5Net vs Yolo V5 6.2 on I7 without seperate GPU

    I'm just analyzing the substream. But holy cow is your performance better than mine, even in cpu mode. :) I need to do some more testing. What model size are you using? small, medium, large, etc
  16. S

    Yolo v5Net vs Yolo V5 6.2 on I7 without seperate GPU

    At a rough estimate, how much faster? A long time ago I tried taking a average to see which was faster, but back then .net was marginally faster. I haven't done my test lately but at a glance my times are all over the place. 200ms to 800ms or so. Occasionally up over a second. Probably...
  17. S

    Yolo v5Net vs Yolo V5 6.2 on I7 without seperate GPU

    Gotcha!
  18. S

    Yolo v5Net vs Yolo V5 6.2 on I7 without seperate GPU

    From my understanding from the past, it was faster to run the .net version of yolo if you don't have a supported GPU. My machine is a i7-6700. With every update of code project, it seems to default to both running and possibly using both. I counter for .net never goes up, but I see log...
  19. S

    lag/ghosting

    Ghosting is usually from having too slow of a shutter or high of a gain on the camera. Being it's a new camera, have you tweaked that stuff yet? As for the motion outside of the zone, I watched the video clip. You'll need to tweak your motion sensor settings in BI if you want to reduce...
  20. S

    Warning ! BI update 5.8.0.11 will corrupt your database and will lose alerts.

    Agreed. I've been on .14 for nearly a week with no issues. I did skip .11 after seeing this post however. I'm an update junkie too but I'll usually wait a couple days to see what folks here are saying about the current latest release.
  21. S

    Blue Iris Clips and Files - Disk Usage Utility

    Hahah Fixed. Read the directions newb! :)
  22. S

    Blue Iris Clips and Files - Disk Usage Utility

    Got a little issue with v6. I'm only getting output for my main New folder and nothing for Aux 1. I have storage set to false since I don't use it. $show_folder1 = $true # 'New' folder, like 'D:\BlueIris\New' $show_folder2 = $true # 'Aux1' folder, like 'E:\BlueIris\New'...
  23. S

    Daylight Savings. How did everyone's cameras do?

    Mine were okay. Only one didn't change and was an hour fast. I somehow had the DST auto switch setting disabled in that cam.
  24. S

    Triggering a Group Camera with AI Enabled

    As an aside from my little experience with reolink before I got rid of them all, make sure "smart codec" is turned off if you have that option in your cam settings. I ran into that changing the frame rate constantly.
  25. S

    Update 11/1/23- Motion/Trigger/Alert settings reflow

    I'm running it, but I honestly haven't really messed with any trigger settings since. I saw some settings are on a different page, but not sure if there's more to it than just that.
  26. S

    How many days of video do you keep for a home system?

    Probably recording only the substream, and main when triggered which is a new strategy I'm playing with. The thought is the sub is good enough for general surveillance but when the cam is triggered you get full 4k or whatever cam you are running
  27. S

    How many days of video do you keep for a home system?

    What about substream bitrate?
  28. S

    How many days of video do you keep for a home system?

    Man I'm hijacking my own thread here. :) What are folks recording continuous sub + triggered running for bit rates? On my 4k cams, h265 is the only option. I have CBR 8192 for the main, and CBR 1024 fot the substream. Not sure if there's much or any benefit going higher.
  29. S

    How many days of video do you keep for a home system?

    All of my 4k's are Annke c800's. I know not the best but half decent for the price. 640x480 and 640x360 are the only options for substream. I sent an email to support asking if they could possibly add a 720p or 1080p option in future firmware.
  30. S

    How many days of video do you keep for a home system?

    I actually just started testing this out on a couple of my cams that don't see a whole lot of action. I wish I could go higher than 640x480 for the substream. It's a 4k cam, but that's my only sub option. I did bump up the bit rate of substream to hopefully get a better image should...
Top Bottom