Search results

  1. Sonnie

    New Store - Camera Recommendations

    I've pretty much narrowed it down to where I'd like to install the cameras. 8 cameras inside and 6 outside. I may add one to view the roof. Major 4-lane highway is out in front of the showroom floor, about 40ft away from the front door. Looking at the front door of the showroom floor, there is...
  2. Sonnie

    UI3 Setting for H264 - Javascript vs HTML5 - Javascript much better?

    I just learned this myself last week. It wasn't choppiness, but it was constantly refreshing with the HTML 5 setting. It was recommended that I try JavaScript, and it resolved my issues. I'd be curious as to when it is appropriate to use one over the other if it is anything other than the issues...
  3. Sonnie

    Detected HTML5 video player stall. Reopening video stream. (UI3)

    I don't just claim it... I got it! I worked with a guy that has done it all his life. Is it the best... absolutely not! But it is considerably better than what most folks have in their homes. :) It is wireless, and the max throughput I'm getting on this particular tablet is 72Mbit/s. I'm not...
  4. Sonnie

    Detected HTML5 video player stall. Reopening video stream. (UI3)

    It's not choppy, just refreshing. The tablet is wireless, but we have very little wireless use otherwise (phones) and an extremely robust network with better-than-average access points. Looking at my Omada Controller... the only thing connected to that AP were our phones which we were not...
  5. Sonnie

    Detected HTML5 video player stall. Reopening video stream. (UI3)

    I have a 14" tablet setup in our kitchen to view four cameras using UI3. It varies from every few seconds to every few minutes; a yellow box pops up (Detected HTML5 video player stall. Reopening video stream.), and the screen refreshes. Any idea what might be causing it? Thanks!
  6. Sonnie

    Is it possible to have two different UI3 streams?

    Got it... much appreciated!
  7. Sonnie

    Is it possible to have two different UI3 streams?

    I must be missing it, but I don't see how to create groups.
  8. Sonnie

    Is it possible to have two different UI3 streams?

    I have a second monitor at my computer that keeps UI3 streaming constantly so I can use the computer without losing view of the cameras. I want to keep all the cameras viewable on that display. We have a tablet on our kitchen cabinet that is streaming UI3. Is it possible to have that tablet...
  9. Sonnie

    Numerous rain alerts... any fix for it?

    I guess I could measure the height of the feeder, and then lay a few boards out there... seems easy enough and at least worth a try. Thanks!
    • Sonnie
    • Post #14
    • Forum: AI
  10. Sonnie

    Numerous rain alerts... any fix for it?

    I do not have an SD card in the camera, and I have not done anything with global config. Has anyone written instructions on how to set it up... and what does it actually do?
    • Sonnie
    • Post #12
    • Forum: AI
  11. Sonnie

    Numerous rain alerts... any fix for it?

    Maybe I need to put a canopy of some kind above the camera to keep the rain off of it?
    • Sonnie
    • Post #10
    • Forum: AI
  12. Sonnie

    Numerous rain alerts... any fix for it?

    I have it on the day/night switch, so it goes to BW and IR at night. Here's a shot of it what it looked like when I was getting all the alerts. Here is when it's clear and before the rain, although just after dark.
  13. Sonnie

    Numerous rain alerts... any fix for it?

    Yeah... I use IE for direct access to all my cameras. Here are my settings:
  14. Sonnie

    Numerous rain alerts... any fix for it?

    I'm not sure. My log only goes back to 2:35am and this was all happening around 1am. I did not notice I could save the log until now. It's supposed to rain here again today/tonight, so I can look at it later and see.
  15. Sonnie

    Numerous rain alerts... any fix for it?

    Video Detection and Smart Motion Detection are disabled.
  16. Sonnie

    Numerous rain alerts... any fix for it?

    I searched for this and found a few threads, but nothing I've done has worked. I still get hundreds of alerts during a rainy day. It's mainly with my camera that I have Animals selected in IVS (deer feeder camera)... IPC-B54IR-ZE-S3. The other cameras are not so bad. I viewed this post, but...
    • Sonnie
    • Thread
    • Replies: 14
    • Forum: AI
  17. Sonnie

    Can't get IP address to update on IPC-B54IR-ZE-S3

    I thought it did not post because I did not see the post, but I now realize I needed to scroll for a mile to get past all the sticky threads. I shut down the Config Tool and reopened it. I attempted the change again, and it worked immediately.
  18. Sonnie

    Can't get IP address to update on IPC-B54IR-ZE-S3

    I've tried several different IP addresses that are free on the network, but it is not taking for some reason. Any ideas or suggestions on how to get it working?
  19. Sonnie

    EmpireTech IPC-Color4K-X is an amazing weather cam

    I turned on the Backlight and set it to BLC customized for the area around the lights, and that helped some.
  20. Sonnie

    EmpireTech IPC-Color4K-X is an amazing weather cam

    Thanks... that might actually be doable even for me. :rolleyes:
  21. Sonnie

    EmpireTech IPC-Color4K-X is an amazing weather cam

    I'll no doubt have to do some adjusting on my with all the lights we have around the house.
  22. Sonnie

    EmpireTech IPC-Color4K-X is an amazing weather cam

    I got mine installed, but I'm not sure how to set this up so that it auto-toggles between day and night. I did not realize it did not offer a monthly schedule that I could manually set or auto-switch like the other cameras I own. I guess I can set my calendar reminder and change it on the first...
  23. Sonnie

    Empiretech PTZ4K45X-AI settings

    That would be ideal if there was a way to set it up.
  24. Sonnie

    New Reolink Wired POE Doorbell Cam ?

    Yep ... i figured that out when setting it up.
  25. Sonnie

    New Reolink Wired POE Doorbell Cam ?

    Hmmm... maybe that's why it didn't power up when I tried it. They use the same manual for both.
  26. Sonnie

    New Reolink Wired POE Doorbell Cam ?

    It's either or... POE or wifi... I use wifi.
  27. Sonnie

    New Reolink Wired POE Doorbell Cam ?

    I have the POE/WiFi model... Build 2401262240 Hardware DB_566128M5MP_W Firmware v3.0.0.3215_2401262240 It shows I am on the latest firmware when I try to update. No issues here.
  28. Sonnie

    New Reolink Wired POE Doorbell Cam ?

    I have the black unit. This is 1280 x 720 in BI... This is 640 x 480 in BI...
  29. Sonnie

    New Reolink Wired POE Doorbell Cam ?

    Hmmm... I only see one option for resolution.
  30. Sonnie

    New Reolink Wired POE Doorbell Cam ?

    The only thing I don't like about it is the fisheye image, but it is what it is. It does what I need it to do.
Top Bottom