Search results

  1. alastairstevenson

    N48PBB

    Looks like it may be the 4-pin connector under the red label on your image. If so, connections will be like this : https://ipcamtalk.com/threads/hikvision-nvr-ds-7804n-e1-4p-bricked.45773/#post-423003
  2. alastairstevenson

    Hikvision KD8003 not visible in SADP when connected to NVR

    A Plug&Play connected camera on the NVR PoE ports would usually have the gateway set the same as that set for the NVR LAN interface. Strictly, 0.0.0.0 is an invalid value. Suggestion - set the KD8003 gateway to be that of the NVR PoE interface base address, usually 192.168.254.1 Then try the...
  3. alastairstevenson

    Hikvision KD8003 not visible in SADP when connected to NVR

    OK, suggestion to try : Pick the NVR PoE port you want to connect the camera to. In the NVR web GUI, note down the IP address associated with that port. It's probably something like 192.168.254.x With the camera powered up and connected to the LAN, and using the known admin password, use SADP to...
  4. alastairstevenson

    Hikvision KD8003 not visible in SADP when connected to NVR

    That's a little odd. Normally all the Hikvision-compatible devices on the NVR PoE ports would be seen by SADP.
  5. alastairstevenson

    Hikvision KD8003 not visible in SADP when connected to NVR

    The NVR PoE ports use a different network segment from than of the NVR LAN port, and by default they are not accessible from LAN devices. That is by design. An option might be to have the KD8003 connected to the LAN and to configure one of the NVR PoE ports to manual instead of Plug&Play and...
  6. alastairstevenson

    Hikvision DS-7608NXI

    A slight long shot - but what browser are you using? That can make a difference in what can be configured in the NVR and camera web GUI. If it's purely Edge, try enabling 'Internet Explorer mode' in the settings. If you've already done that , try with native Internet Explorer for the browser...
  7. alastairstevenson

    DS-2CD2342WD-I Password reset

    @jameder9 One more spam link and you'll be out of here, along with your posts. Please don't do this.
  8. alastairstevenson

    Hikvision DS-2CD2x32-I (R0) brick-fix tool / full upgrade method / fixup roundup.

    Here : https://ipcamtalk.com/threads/r0-ds-2cd2x32-brickfixv2-brick-recovery-and-full-upgrade-tool-enhanced.24343/
  9. alastairstevenson

    Hikvision NVR7208-12/P8 Firmware Required

    I've seen some instability with firmware NVR_K51_BL_ML_STD_V4.61.010_220527 on a DS-7608NI-I2/8P and I think there has also been mention of that a couple of years ago on here. The NVR tended to freeze or reboot when configuration changes were made. Via the serial console, I downgraded the...
  10. alastairstevenson

    Hikvision DS-2CD2x32-I (R0) brick-fix tool / full upgrade method / fixup roundup.

    Check if the tftp updater is still probed at power-on. Check if telnet is still accessible. Best arrangement is power with 12v and both PC and camera on their own switch ports.
  11. alastairstevenson

    Hikvision DS-2CD2x32-I (R0) brick-fix tool / full upgrade method / fixup roundup.

    You can't convert the camera to EN and get it to accept the EN firmware without changing the language byte in the flash partition and adjusting the checksum bytes. It does look like ChatGPT has misled you again. Check the step by step instructions in the first post.
  12. alastairstevenson

    Hikvision DS-2CD2x32-I (R0) brick-fix tool / full upgrade method / fixup roundup.

    No, the next step was to follow the instructions to edit the flash partition to change the region from CN to EN. After that you can update with the international firmware. It seems that ChapGPT has misled you on the needed steps. Check the instructions on the first post, and also the YouTube video.
  13. alastairstevenson

    Alternative way of recovering HikVision NVR password

    The 'trojan horse method' of finding an NVR admin password depends on the fact that apart from the later versions of NVR firmware, it was the NVR admin password that was used to 'activate' an 'inactive' camera when first plugged in to an NVR PoE port. And then the backdoor vulnerability of...
  14. alastairstevenson

    Alternative way of recovering HikVision NVR password

    Let's hope so! The admin password for the MAIN DECK HIKVISION DS-2CD2232-I5 - 482311325 camera is 12345
  15. alastairstevenson

    FYI: FBI disrupts Chinese cyber operation

    No longer possible ...
  16. alastairstevenson

    DS-2CD2342WD-I Password reset

    I was going to respond to the profile post - but I see you got it sorted.
  17. alastairstevenson

    Alert on simple contact closure. Any suggestions?

    How does that do recording? It seems just to be a set of USB controlled relays. Unless I've misunderstood the spec. Many cameras, and more NVRs, have the ability to trigger recordings from wired alarm inputs.
  18. alastairstevenson

    New Shed - Camera Suggestions

    OK, didn't see that.
  19. alastairstevenson

    New Shed - Camera Suggestions

    And unless because it's not yet completed, and none of the ties are yet in place, what's to stop the roof from simply lifting up / moving due to air pressure fluctuations from wind gusts?
  20. alastairstevenson

    Hikvision NVR 256-CH No enough network bandwidth

    There are 4 ethernet interfaces. If you can trunk them all, this will give you the needed capacity, and spread the load.
  21. alastairstevenson

    Hikvision NVR 256-CH No enough network bandwidth

    How are the NVR ethernet interfaces connected to your LAN / what is the capability of the LAN interface? Are you trunking the NVR ethernet interfaces / how many are connected?
  22. alastairstevenson

    Hikvision camera admin password reset tool

    The backdoor vulnerability that allowed a configuration file to be extracted without authorisation was fixed in firmware 5.4.5 and later. It looks like you have missed this vulnerability too ...
  23. alastairstevenson

    Flat Ethernet cable

    Yes indeed!
  24. alastairstevenson

    Flat Ethernet cable

    You've just provided way more free advertising than the original short post with the link did.
  25. alastairstevenson

    Flat Ethernet cable

    And they were assessed as spam/advertising and removed.
  26. alastairstevenson

    Hikvision camera admin password reset tool

    That's new enough that the well-known vulnerabilities have been fixed, unfortunately.
  27. alastairstevenson

    Hikvision camera admin password reset tool

    It depends on what firmware vulnerabilities can be exploited. These do eventually get fixed. What firmware version does SADP show that the camera is using?
  28. alastairstevenson

    Time-lapse help?

    There are a variety of programs and apps that could do that, many of which are just plug&play. I've used ffmpeg under Linux (also available for Windows, but I don't know if there are differences) to create timelapse videos from stills. It's quite a complex package, but it does provide a...
  29. alastairstevenson

    Hikvision ds-7616nxi-i2/16p/s factory reset?

    At last, it got there, well done for persisting!