Search results
-
W
AI works in debug but doesn't log it.
I too had a triggering issue and dropped from 30 FPS to 10 and now 20. The issue here though is that I am triggering and just not reading the plates.... I did look closer at my AI debug log in BI and it says that my round trip analysis times are 250ms going to my Linux server.... At 50ms a... -
W
AI works in debug but doesn't log it.
I copied yours about an hour ago to make mine identical. It made matter much worse. I captured one plate out of ten... which is actually good. Fixing more intermittent problems is a PITA. Here is a video (#2) and Blue Iris highlights the plate when I pause it while playing back. (#1) The... -
W
AI works in debug but doesn't log it.
Mike.. Attached and also see post #9 for sub menus... 5 seconds after the trigger.... Maybe that is too long? Wouldn't that just mean more processing? Thanks again guys.... -
W
AI works in debug but doesn't log it.
Looks like mine that get a "hit" go backwards too. I guess I am getting a hit BEFORE the trigger. Mine are showing every 50 MS then going backwards.... to 200 ms, then looks like many are not printing.... Not quite sure where the ones in the 100ms range are? I assume that is because it... -
W
AI works in debug but doesn't log it.
I wonder if in some cases my trigger is too late... Since I have my pre-trigger set up, I wonder if it would be possible to have Ken either start the AI process with frames that happened BEFORE the trigger by some configurable amount.. Or maybe search through them if it didn't get a hit. The... -
W
AI works in debug but doesn't log it.
Here is a "good one". This one seems to catch it at the trigger.... -
W
AI works in debug but doesn't log it.
So the video I posed initially shows a cancelled alert. I NEVER get more than ONE of these even on a good capture that reports the plate.. ie. Mine looks nothing like yours... -
W
AI works in debug but doesn't log it.
Stupid question. Where is the cancelled alert? I’d love this info. -
W
AI works in debug but doesn't log it.
Gravity might have pulled it down a tad. Good catch. I’ll muck with that tomorrow. Here are my motion settings. Zone A is basically the road minus those bushes in front. Zone b is left and zone c is ten pixels to the right or so. Tells me direction. -
W
AI works in debug but doesn't log it.
Ok. So I am still missing them some. This one here, the image on the clips doesn’t show anything. I am wondering if the trigger is too late in some cases. Maybe I should zoom out. -
W
AI works in debug but doesn't log it.
Ok, that makes some common sense.... I am probably going to pick up a 4060ti as well to accelerate the LPR... -
W
How long should POE switch last?
Did you have any lightning recently? I have a Netgear switch and after a lightning storm I lost one of the ports. I have a surge protector on it now.- wpiman
- Post #2
- Forum: Accessories
-
W
AI works in debug but doesn't log it.
So I am getting great shots of cars coming up the road. This is an Amazon truck with clear plates that it somehow missed. Weirdly: I am playing back this video with AI debugging and in the right window it shows the plate, but on the left window I don't see it in the log on the left. It shows... -
W
Looking for the best LPR and security camera system
Start here... https://ipcamtalk.com/wiki/- wpiman
- Post #2
- Forum: IP Cameras
-
W
CodeProject.AI Version 2.0
Bringing a bazooka to a gun fight.... I've been thinking about adding a 4060Ti. Lower power and much cheaper... -
W
CodeProject.AI Version 2.0
So is there an optimal size image to send to Codeproject.AI from Blue Iris for those of us with TPUs? Maybe one or two/ Thanks for the explanation on the multiple TPUs. Makes sense. -
W
CodeProject.AI Version 2.0
I am running 2.5 RC 9 on my Windows box now. I have a Dual TPU and a relative old Xeon that has Intel decoding.... The Coral object detection is pretty good. I am sending a picture from the Explorer and the inference time is 60ms (processing 161.. analysis 406)... By comparison, on my other... -
W
Blue Iris and CodeProject.AI ALPR
https://regex101.com/ Useful tool Copy my expression.... 12[5S] ?76[5S] and try 125765, 12S76S, 125 76S -
W
Blue Iris and CodeProject.AI ALPR
Actually, I just did something similar to what you did-- but I think I made it easier... 12[5S] ?76[5S] where the pairs [5S] are things it can confuse (Ses and 5s)... and the " ?" means zero or one space... I did the same for [B8] and [71] etc.... I'll let you know how it goes... -
W
Blue Iris and CodeProject.AI ALPR
I use MQTT to send my plate to Homeseer and was thinking of doing something very equivalent. I think our plates have 2,4,5,6,7,8,B,J,S,Z The 8s and Bs get confused...7 and Zs... 5 and Ses...... The J and 1s... I also get spaces in the middle of some of them.... The permutations can get... -
W
Blue Iris and CodeProject.AI ALPR
I was thinking something like this myself-- rather than say a license plate is 12S 765 at 90% confidence.... I would like to put that particular plate in and have it tell me if it sees that plate. I often will see my plate and it will say 125 765 at 90% confidence or 12S 76S at 95%... -
W
CodeProject.AI Version 2.0
So I installed cpu-2.5.0 on my Linux box under Docker. Went great. ALPR and object detection work fine. On Windows, I installed 2.5 RC4 after removing my old version. I removed the Codeproject.ai directory completely and installed the new one. I then added the Coral lib and the ALPR one... -
W
3D Printing Dual Camera Mount for Pairing Z12's
I was wondering if that PETG was going to be strong enough to support those camera with that infill, but once I saw them mounted so gravity is doing some of the work it made a lot more sense. I 3D printed some camera mounts that go up against the lap siding and fit between the housing. It was... -
W
Hiding camera in plain sight, frontyard?
Let's see some video..- wpiman
- Post #9
- Forum: Camera Installation Questions
-
W
CodeProject.AI Version 2.0
How does the software run on Docker for Windows? I have my Coral AI TPUs on my windows machine... Code Project runs like a dog on my windows machine and maybe this is the reason. I assume GPU and TPU passthrough is possible on docker for windows? -
W
Blue Iris and CodeProject.AI ALPR
I make it a routine to make sure the modules and data directory get deleted if I am changing versions.... Are you on linux, windows, or mac? -
W
CodeProject.AI Version 2.0
Interesting.... they are all on separate machines and typically you just forward the port to the container. I wonder if meshing uses a new port... The docker hosts are on 192.168.0.2,173,174 respectively. I suppose I could set up a macport or something, but that would suck. -
W
CodeProject.AI Version 2.0
https://www.codeproject.com/AI/docs/features/mesh.html This claims the mesh "just works". I have 3 codeproject.ai instances running. 2 orange Pi and one Linux. All on docker.... They don't appear to see each other... The documentation is useless.. -
W
Harley sales keep declining.....
People aren't smoking either.... dangerous hobbies are going the way of the dodo... -
W
I saw a magic bus appear and there was't even a sonic boom involved. The magic bus shimmers in and out of existence and then a haint flitters about.
It could be all the pot smoke coming from the van clouding the image..- wpiman
- Post #7
- Forum: Camera Captures