Search results

  1. D

    App keep on getting alert with Deepstack time out

    Omg Bingo! I must have copied a setting in there while I was playing (learning)with the settings. Got yelled at by the wife the last 2 nights for keeping her up with all the dinging! Thank you for saving my marriage lol.
  2. D

    App keep on getting alert with Deepstack time out

    On alert only triggers ptz and it's only supposed to on co nfirm
  3. D

    App keep on getting alert with Deepstack time out

    I get no motion but repeatedly getting this annoying alert on the phone but no recording.
  4. D

    Deepstack seem to continuesly triggered with no motion

    ahh, good to know. That makes sense and adds another layer of options On the same note, In the alerts tab do we match the trigger zone with the zone in AI or just keep them all selected?
  5. D

    Deepstack seem to continuesly triggered with no motion

    Regarding alerts, are we still using the alerts tab for this or are we using immediate actions now? I assume the alert tabs is only for the old ways but since our motion sensor i set to work with AI, if left default, it will probably trigger a lot of false negative?
  6. D

    Deepstack seem to continuesly triggered with no motion

    On average i use a 10 seconds pretrigger.
  7. D

    Deepstack seem to continuesly triggered with no motion

    I'll do anything you guys recommend at this point. When using deep stack, does any of the setting in motion detector matter anymore? Beside setting up the zone, I unchecked everything else. Also, What does the Add to alerts list do? From another youtube video, he recommended to use Hi-res JPEG...
  8. D

    Deepstack seem to continuesly triggered with no motion

    Just to make sure, Zone A i clicked fill to cover the entire area, zone B I masked as the photo above. And in AI I have the following.
  9. D

    Deepstack seem to continuesly triggered with no motion

    When you say zone a entire screen, you do mean to include the areas inside the red box then just add some b over it?
  10. D

    Deepstack seem to continuesly triggered with no motion

    Lets take this odd shaped location for an example.. The area inside the red boxes are the area of interest, i'd like it to trigger only if a person or an animal have movement within the the box, however, in the example below assume I set the zone area as indicated, the a person's legs will be...
  11. D

    Deepstack seem to continuesly triggered with no motion

    Since I'm coming with all my cameras motion and zone defined before deep stake, do I now need to redo all of my motion detection? I have zone crossing for the majority of my cameras but it seems with deep stack, I only want to use specific zone?
  12. D

    Deepstack seem to continuesly triggered with no motion

    Actually found something. First photo you'll see a bunch of little short clips, these are shown in "NEW" there are actually many of these clips that are just a few seconds long. When I analyze it wirth deepstack, it thinks it's a parking meter and triggered it. why the hell does a parking meter...
  13. D

    Deepstack seem to continuesly triggered with no motion

    I might have found the issues. I purged BI installation trying to figure out the lagging issue. Long story short, there was the old files in the storage I see some dating a year old. deleted everything and only saved the last few days. Got ran out of disc error and some recording might have...
  14. D

    Deepstack seem to continuesly triggered with no motion

    Starting on deepstack for the first time, noticed my drive is filling up and lots of alerts picture with no motion. IE the driveway camera will have alerts with my car just parking there. How do you avoid this?
  15. D

    interface lagging after updating to 5.5.3.4

    Makes perfect sense. went ahead and adjusted all my cameras to 15 fps for both streams. watching the example, 10 FPS is jittery while 15 vs 30 is hardly distinguishable.
  16. D

    interface lagging after updating to 5.5.3.4

    Wouldn't a 30 FPS provide more detail of the faster moving objects so when you need to zoom in for identification, it would be better?
  17. D

    interface lagging after updating to 5.5.3.4

    So you're saying i should go ahead and make main/sub both 15 FPS and have no negative affect and perhaps even gain efficiency?
  18. D

    interface lagging after updating to 5.5.3.4

    Now that I'm able to see all my hidden cameras and adjusted the subsctreams BI is reporting only 8-12 % CPU usage while on idle with minimal motion. Pretty sweet. Spent a good part of the money going through each camera adjusting frame rates/iframe and this is where I stand. Some of my generic...
  19. D

    interface lagging after updating to 5.5.3.4

    OMG makes no sense! Thank you
  20. D

    interface lagging after updating to 5.5.3.4

    seriously, it shouldn't be this difficult. I get the same menu right clicking on the green area
  21. D

    interface lagging after updating to 5.5.3.4

    If you're refering to the pencil "edit layout" it's not in there. BTW: I also want to say that substeam definitely helped with CPU, I'm seeing an average of low 20% vs the 35% CPU usage.
  22. D

    interface lagging after updating to 5.5.3.4

    I can no longer right click show hidden+disabled cameras. How is it done now?
  23. D

    interface lagging after updating to 5.5.3.4

  24. D

    interface lagging after updating to 5.5.3.4

    spent the last hour going through all my cameras ensuring that I have substreams setup. I'm not sure if it does anything as my CPU usage remains the same.
  25. D

    interface lagging after updating to 5.5.3.4

    I gotta find some documents on the substeams option. Updated mainly for deepstack but it looks like I'll have to figure out some new features along with it.
  26. D

    interface lagging after updating to 5.5.3.4

    as crazy as this may sound, turning off HW acceleration fixed the issue and now I turned it back on and still working fine. Very weird. Going to do some more poking at this. I've done the optimization long ago.
  27. D

    interface lagging after updating to 5.5.3.4

    went ahead and delete all the registry and reinstall. First run with nothing interface is nice and smooth. Right after I import my settings things are lagging again. Even with I paused the system it is lagging. :(
  28. D

    interface lagging after updating to 5.5.3.4

    Just left the house but will test all of it when I get back. What's annoying is I went through the automatic upgrade path through the interface from 5.3 to the current version and the recommended steps nothing should change and seems to remain the same. Don't understand why it would have this...
  29. D

    interface lagging after updating to 5.5.3.4

    Locally not remote
  30. D

    interface lagging after updating to 5.5.3.4

    All that's are checked as suggested. It's not even the live view that is the issue, the whole BI navigation is laggy. Even in settings, to jump from one tab to another takes a few seconds and doesn't seem like it does anything when you click on it but eventually it'll go to the tab you click.
Top Bottom