Search results

  1. D

    5.4.9 - June 25, 2021

    I am pleased to report that when using 5.4.9.6, confirmed/cancelled for me are now more or less perfect. DS correctly cancels all the flickering shadows and night time reflections from rain, fog, spiders, bugs etc. No triggers are missed entirely (and regardless of the iframe interval). One...
  2. D

    New Blueiris camera box suggestions

    With the discovery that the 100/170 and other errors when using DeepStack with Blue Iris are likely to be CPU overload, I would suggest that PC recommendations are put on hold until after the final chapter. And delete the related wiki however that’s done.
  3. D

    5.4.9 - June 25, 2021

    OK, so after a day with an iframe interval of 10 seconds (150, frame rate 15fps), I had 108 correctly confirmed, 5 cancelled because they were occupied, 7correctly cancelled (wind and sun through the trees) and 1 false confirmation. The 108 + 5 moving objects correlates well with the IVS...
  4. D

    5.4.9 - June 25, 2021

    I discovered one or two things that maybe you guys already knew but perhaps not: 1. If you uncheck the Pre-trigger video buffer, the first image that BI sends to DS for analysis is at T+0 instead of T-xxx 2. DS always chooses the image with the highest confidence percentage, even when they...
  5. D

    5.4.9 - June 25, 2021

    Brilliant feedback beepsilver - thank you. I have tried a great many different settings but on different versions of the software. It’s a little late here in the UK now, I’ll try and make sense of where I am tomorrow. I have tried both single and multiple motion zones and 5x 0.25s frames for...
  6. D

    5.4.9 - June 25, 2021

    Hello guys. So far as I know, it was established that BI does not wait to send the next iframe to DS for analysis. And, we can now send images at a rate of 0.25 seconds. And, BI's triggered images look pretty good to me. So why does it matter what the iframe rate is? Infinitesimal...
  7. D

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    Just one more before I shut up for a while. It may be that 5.4.9.1 isn't good for me or else all my other tweaks are now the problem. To confirm how the system works, does BI decide to compile an image to send to DS and when the pre-trigger starts, ending up being1.4 seconds or probably more...
  8. D

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    OK JL-F1. I had perhaps mistakenly assumed that ‘Begin analysis with motion- leading image’ meant that BI would send an image to DS at T-0 instead of sending the next iframe. I think that many visiting the forum have/had the view that BI uses/used iframes exclusively. I did note that your...
  9. D

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    Thanks again JL-F1 for the very useful feedback. Removing the additional 1 second images has caused a very large number of false cancellations. I will try a solid detection area now. But I note other comments from the 5.4.9 thread. I guess it needs a 5.4.9.1. Picking up on one of the...
  10. D

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    What brilliant help guys! Thank you - although I still have a way to go to get to grips with it all. What brilliant software tools! I've updated to 5.4.9 and done a new cancelled analysis:- I think the picture relates to the lower of the two analysis details and can now see from the...
  11. D

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    Thanks for the info JL-F1. Today I had one passing car cancelled. At the moment my recording is set to 'continuous + triggered' and not 'when triggered' but when I do the DS status thing with it, the result is below. Of course, this was not performed live and I don't understand why it would...
  12. D

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    Today’s test with “Begin analysis with motion-leading image” checked and the iframe interval at 1s instead of 5s wasn’t perfect this time for cars passing the end of my drive - 81 confirmed but 5 cancelled. To be provocative, are the cancelled triggers caused when an iframe happens to occur...
  13. D

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    What a good idea looney2ns. I‘ll first run the test as is today.
  14. D

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    After a further full day (dawn till dusk) with the revised settings (iframe 5s, mode medium, pre-trigger 4s), 68 cars past the end of my drive (in view for only a little over one second). 68 were confirmed and 0 cancelled. I have now changed only the iframe interval back to 1s. If the result...
  15. D

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    Thanks for the quick replies guys. wittaj, unfortunately I have never seen a blue border around the entire image. By the way, I am very much aware of the difference between tuning and live DS. sebastiontombs, do you not think that, as a proving exercise, extending the iframe interval well...
  16. D

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    Continued testing with a 10s iframe interval… So far today, 37 cars confirmed but still 3 cancelled. This compares with a cancellation rate previously of approx one in three with a 1s iframe interval. So not quite the conclusive result I would have preferred. Also, I now notice that the...
  17. D

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    Hi sebastiontombs Whilst I really do respect the fact that your level of knowledge here is on a far higher level than mine, I’m not sure you are correct. I am now able to log into my BI and have noticed the new check box function, “Begin analysis with motion-leading image” To check out what...
  18. D

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    OK sebastiontombs, thanks for your appraisal, it seems to correlate with jaydeel’s testing experience. However, to throw my cards on the table, I’m still with JL-F1 and I’ll do my own test when I get home. Why would BI send low level motion sensing without a full trigger to DS when for sure it...
  19. D

    5.4.8 - June 16, 2021 - A DeepStack status page has been added

    Oh. I thought BI only sends an image to DS for analysis when BI has been fully triggered regardless of whether or not “Apply to motion triggers only” is checked and the meaning was as per JL-F1 #24. This also ties in with my previous unanswered query - does BI send it’s actual triggered image...
  20. D

    DeepStack "Nothing Found"

    OK wittaj, thank you. Are you thinking of reporting this problem to support? May I ask you to report back how it develops please via this thread? As I said, I don’t have access to my system this week, how will I find my log.txt file?
  21. D

    DeepStack "Nothing Found"

    Hello wittaj. It’s a little embarrassing for me to confess that I have not examined the detail in my logs to perhaps gain an insight into my falsely cancelled alerts. Unfortunately I don’t have access to my system this week, but I’m sure it would be helpful for a number of us if you were good...
  22. D

    Can we do anything from our side to improve DeepStack?

    I am still way behind most other forum members when it comes to getting what I want out of the integration of DeepStack with Blue Iris. Perhaps different to most, I’m still at the basic first step - reliably confirming triggers. (Right now I don’t send alerts). Step two will be adding custom...
  23. D

    5.4.6 - May 17, 2021

    Perhaps for the camera I've featured earlier in this thread, there is no ideal setting for DeepStack to confirm all vehicles passing the end of my drive:- When running the BVR file through Analyse with DeepStack, the truck is flagged in red for 1200mS. However, with live data, 200mS of this is...
  24. D

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    Thinking about this, I’ve realised that the requirement of waiting for a key frame to arrive from the camera before an image can be sent to DeepStack and at one second intervals is not valid. When recording continuously, Blue Iris already has memorised the preceding key frame. Prior to...
  25. D

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    I doubt it. I assume it works with 5, 10, 15 or20 fps but perhaps only with a key frame interval of precisely 1s.
  26. D

    Hell Yeah! Direct Deepstack Integration - 5.4.0 - March 31, 2021

    I had been wondering how Blue Iris is able to select only key frames to send to DeepStack. Maybe it’s described somewhere broadly how it works?
  27. D

    5.4.6 - May 17, 2021

    Hello m_listed When I said I had temporarily inverted Zone A (the full image), this was only whilst I took a snapshot for the post so that the other zones could be seen. Sorry that wasn’t clear enough. But for large moving objects eg cars that straddle the “Object crosses zones” I don’t think...
  28. D

    5.4.6 - May 17, 2021

    Feedback from today using the camera in post #4 as follows:- 1. I applied the setting changes indicated by fenderman 2 I reviewed my motion settings (attached), temporarily inverting zone A (which is the full image) so that all the other zones can be seen in one snapshot. If my settings are...
  29. D

    5.4.6 - May 17, 2021

    OK will do.
  30. D

    5.4.6 - May 17, 2021

    OK, thank you. I hope it works but will mention that some cars (moving faster) are confirmed and some cancelled. I will report back - perhaps it will have to be tomorrow.
Top Bottom