Search results

  1. rufunky

    Whats is your "go to" weatherproof enclosure?

    I updated my post to include "for housing switches and such" to be a little more clear. Those L-com enclosures are nice but damn pricey. I think I am getting spoiled from my over use of amazon purchases :D
  2. rufunky

    Whats is your "go to" weatherproof enclosure?

    There are lots of options out there for sure. Just curious what peoples prefered weather proof enclosure is for housing switches and such.
  3. rufunky

    anyone have Ubiquiti NSM5 setup with multiple cameras?

    These are great! I will def keep this in mind for the future but I will need the ability to angle/ adjust the radios so unfortunately they may not work in this situation.
  4. rufunky

    anyone have Ubiquiti NSM5 setup with multiple cameras?

    I believe the cams are under 11w each so 4 x 11 = 44w. I will double check though. If I use that INS-3AF-0-G adapter I will have to upgrade the 5 port POE as the 5th port isnt POE. Do you know if the power brick it comes with is rated for outdoor use/temps??
  5. rufunky

    anyone have Ubiquiti NSM5 setup with multiple cameras?

    YES, I'll grab a couple of them too. Thanks!
  6. rufunky

    anyone have Ubiquiti NSM5 setup with multiple cameras?

    I had to put this off but now I'm finaly ready to place the order for this stuf. Could someone familiar with this setup verify that I have everything I will need to get this ready to plug in my 4 cameras?
  7. rufunky

    active deterrence IPC-HDW5241H-AS-PV shceduling problems...

    Anyone have issues with scheduling IVS ( particularly Trip Lines ) on this camera? I had set up a schedule of 00:00 - 07:00 and another 23:00 - 24:00 hoping to disable the Tripline during the hours of 7am -11pm but the IVS along with the siren was still enabled during those times.. On another...
  8. rufunky

    Short-review IPC-HDW5241H-AS-PV Active Deterrence Eyeball AI Cam

    Anyone have issues with scheduling IVS ( particularly Trip Lines )? I had set up a schedule of 00:00 - 07:00 and another 23:00 - 24:00 hoping to disable the Tripline during the hours of 7am -11pm but the IVS along with the siren was still enabled during those times..
  9. rufunky

    Dahua NVR gui have access to zoom for applicable cameras?

    Thanks so much MC1987!
  10. rufunky

    Dahua NVR gui have access to zoom for applicable cameras?

    Thank you wittaj I should have mentioned this NVR is not on a network currently. I will update my original post to reflect this.
  11. rufunky

    Dahua NVR gui have access to zoom for applicable cameras?

    Does Dahua NVR gui (NVR 4.0) have access to zoom for applicable cameras? I'm trying to avoid having to plug a laptop in to one of the POE ports just to adjust the zoom on a couple of cameras. I swear this feature was present a couple years ago... EDIT: This NVR is not on a network currently
  12. rufunky

    Best bang for buck -Cat 5e recommendations

    Wierd, it still just says " was placed on March 4, 2022 and is currently Processing. "
  13. rufunky

    Best bang for buck -Cat 5e recommendations

    Thank you, I ended up ordering from the IPCT store. Anyone know how to find the tracking number for an order?
  14. rufunky

    Dahua NVR web GUI "config file error" not showing cameras..

    UPDATE: I reset DEFAULT on all Parameters Had to reboot the NVR a few times after the default reset but now I no longer get the error and everything seems to be working as should...
  15. rufunky

    Dahua NVR web GUI "config file error" not showing cameras..

    I am getting a "Config file error" when logging into my dahua NVR web GUI. None of the names of the cameras are showing up nor is the video. This happens on both Chrome, edge and IE. I reset browsers and also tested on other computers in the office with the same result. Any suggestions?
  16. rufunky

    Best bang for buck -Cat 5e recommendations

    This cable that I normally order from Monoprice now cost $125 vs $75. I'm not looking to skimp on quality but If there is a more affordable option with comparable quality I'm all about saving a few bucks. What are you installers using? Any suggestions?
  17. rufunky

    Factory reset for GWSecurity NVR??

    Thank you, I emailed them with the info today!
  18. rufunky

    Factory reset for GWSecurity NVR??

    Right? I was reading about that also. A lot of unhappy customers!
  19. rufunky

    Factory reset for GWSecurity NVR??

    I acquired a GW security NVR and am trying to reset it as the previous owner lost the password. I opened it up but do not see any obvious reset buttons. Any suggestions? model GW5508NPG
  20. rufunky

    Anyone use the full color cams as a floodlight?

    Thanks for all the great suggestions. Looks like the cameras give off enough light to get by but I'm not sure I'd be 100% satisfied .... I took a trip into the attic to see what fishing a new wire off of my deck light switch would entail. The deck switch is powered off of the kitchen ceiling...
  21. rufunky

    Anyone use the full color cams as a floodlight?

    Thanks guys. Bradner if you could do so that would be great. I may be able to split the back light up in the attic easy enough if need be..
  22. rufunky

    Anyone use the full color cams as a floodlight?

    I have a small staircase on the side of my house leading up to my deck ( picture below) . I have contemplated placing a camera on that side but also need a motion light over there as the one I had was connected to the one on the back of the house via metal conduit and it just looked ugly. Has...
  23. rufunky

    IPC3235ER3-DUVZ live feed via web GUI is unusable..

    The user has been locked. Please try again in 7 minutes. Good suggestion. I did actually have these settings on. Seems there was an issue with the resolution/framerate settings in the camera. Once I changed those settings it worked fine in both chrome and edge!
  24. rufunky

    IPC3235ER3-DUVZ live feed via web GUI is unusable..

    Even though I have "Add Without Signup " checked off?
  25. rufunky

    IPC3235ER3-DUVZ live feed via web GUI is unusable..

    Any idea why this says offline?
  26. rufunky

    anyone have Ubiquiti NSM5 setup with multiple cameras?

    Wow, you have shared some very useful information. I really appreciate it. I am located near Boston Massachusetts so we can get some cold winters and hot summers. I think the specs -4 ~ 140'F would have worked. I'll take a look at the TrendNet industrial switch.
  27. rufunky

    IPC3235ER3-DUVZ live feed via web GUI is unusable..

    Oh nice! That could come in handy.
  28. rufunky

    IPC3235ER3-DUVZ live feed via web GUI is unusable..

    Ok, so IE works fine! It is just edge ( and chrome shows no video ). IE wont be around much longer so I'd like to get edge working as telling someone to use a retired browser looks bad. What exactly is the RTSP link used for?
  29. rufunky

    anyone have Ubiquiti NSM5 setup with multiple cameras?

    Got it, again I miss read something somewhere because I had it in my mind the POE was 60 watts. Do you have a higher wattage POE injector you would recommend for outdoor use ( By outdoor I mean, in this enclosure )? I used a POE adapter that wasn't rated for outdoor use on a parking lot pole...
  30. rufunky

    IPC3235ER3-DUVZ live feed via web GUI is unusable..

    EDIT: I changed the encoder and resolution pixels and it is now showing live feed with no lag! So I am not sure wtf is up with Uniview camera GUI ..
Top Bottom