Search results

  1. A

    DS-7604 Not enough memory during upgrade

    The NVR I have is the 7604NI-SE/P. It is a generation before the 76XXNI-Exx family. So What is this "The user is locked"?
  2. A

    DS-7604 Not enough memory during upgrade

    Thanks Alastair, I have already checked all your suggestions. Eventually I found the culprit. My PC was rather old and slow and could not respond quickly enough to the first three pings from the NVR. I used a faster PC and the TFTP worked OK. So I have recovered my NVR to the latest fw 3.0.15...
  3. A

    DS-7604 Not enough memory during upgrade

    I have the DS-7604 NVR with 3.0.9 firmware. I tried to upgrade to fw 3.0.15 from the web interface of the NVR, from a local USB stick on the NVR, from the iVMS4200 and always get the message "Upgrade failed. Not enough memory." Then I tried the TFTP utility. When the NVR starts it responds for 3...
  4. A

    Image rotate mode in 2CD2352

    I have the 2CD2352 European with firmware 5.3.8 and it does not have the image rotate mode (or corridor mode called in other cameras). Does anyone have this model with possibly another firmware that has this image rotate mode?
  5. A

    FOV of 2CD2352-I for various lenses

    I was aware of the post of CamFan and that inspired to actually measure the angles of the 2CD2352 at 4mm from a borrowed camera. So horizontal angle of view is 65 degrees and vertical angle of view is 48 degrees. The horizontal angle of view is very similar to the new Chinese targeted camera...
  6. A

    FOV of 2CD2352-I for various lenses

    Does anyone have the FOV angles (horizontal and vertical) of 2CD2352-I (5Mpixel) for various lenses? I cannot find any info officially at HIK sites.
  7. A

    2CD2352 usage of SMB/CIFS virtual drive under win7

    Hi Alastair again. Yes I mean 3GB. I only need it for testing and recording only a few minutes. Besides that is the only space I have left on a small hdd. On a sidenote. In the live windows I can record video and pics manually in a windows 7 machine. The files are stored in the virtualized...
  8. A

    2CD2352 usage of SMB/CIFS virtual drive under win7

    Camera 2CD2352 European with firmware V5.3.8 build 151224. I have created a Microsoft virtual drive of 3GB under a Windows 7 machine. In this virtual drive I have created a directory HIK2352 and shared with every one with full control rights. In the camera NetHDD tab I created and connected...
  9. A

    Email alerts not working when Hikvision cameras connected to DS-7608NI-E2/8P

    I am using my ISP email servers WHO allow SSL and also yandex email service.
  10. A

    Email alerts not working when Hikvision cameras connected to DS-7608NI-E2/8P

    My following proposal may not sound reasonable but in my case in the past it has worked. 1. Reboot both camera and NVR in sequence. 2. Revisit all menus and ensure that the network settings are as they were before the reboot and as they should be per mine and alastair's instructions. If they are...
  11. A

    Email alerts not working when Hikvision cameras connected to DS-7608NI-E2/8P

    Hello Alastair. Now you confused me as well with the above. Are you referring to the configuration of the channel at the NVR camera menu? This menu is not accessible from the NVR browser GUI interface, it is only accesible from the native NVR interface through the HDMI display. At which point...
  12. A

    Email alerts not working when Hikvision cameras connected to DS-7608NI-E2/8P

    Your camera gateway is wrong. It should be 192.168.254.1. The camera is routed First through the NVR Internal PoE switch which has an IP of 192.168.254.1. Then the NVR routes all traffic to the Garcoyle LAN router at 192.168.1.1. Also put as secondary DNS everywhere the google DNS 8.8.8.8. It...
  13. A

    firmware 5.4.0 for R6 anyone tried?

    http://blog.mediacoderhq.com/h264-profiles-and-levels/ check url above for explaination of H264 profiles definition
  14. A

    HikVision and Powerline Adapter help please! (And Synology)

    @fenderman. Can you please explain why you are not recommending power line adaptors? Is there a technical reason? Practically any camera requires max 10Mbps which is much less of any power line adaptor bandwidth capability and they should work. Any other reason?
  15. A

    Night settings for EXIR DS-2CD2342WD-I

    The NVR firmware (either native GUI through VGA/HDMI or web interface) can not access the advanced camera settings. You must access the web interface of the camera itself to configure advanced settings.
  16. A

    which email providers are you successfully using after gmail fail?

    I use the yandex.com for the camera with SSL and so far it's working ok. I am located in southern Europe (if it matters at all).
  17. A

    2CD2342WD-I vs 2CD2332-I resolution

    Of course it would help. The lower the bitrate. the higher the compression, the more information is thrown away, the less disk space is occupied. That's how it goes. When you compare two cameras, all video and image settings must be the same, in order to evaluate the quality of the sensor-lens...
  18. A

    2CD2342WD-I vs 2CD2332-I resolution

    The resolution of the 1st picture posted is 2688x1520 ad the resolution of the second image is 1920x1080. It is not fair to compare different resolution pictures and from different views in order to compare cameras. How are these snapshots were captured? To my opinion the 1st picture (porch...
  19. A

    My Dreamcam! Low Light, 32x optical, 16MP - DS-2DP1636Z-D

    I would be intersted for images from the 8223. When the 8223 is at the widest angle of view and a person is detected at a long distance, does the autotracking also zoom in the person? If yes, then how much does it zoom in, in order to increase the optical resolution for facial recognition?
  20. A

    GMAIL Failure? Anyone Else?

    Camera with 5.1.6 firmware emails are working OK through yandex, NVR 7604NI-SEP email are not working again. The settings in both devices have not been changed for the past three weeks since when all devices and emails were working OK.
  21. A

    GMAIL Failure? Anyone Else?

    Now that is interesting. Who gives the instruction to " ... follow all the steps to upgrade ...."? Why is that required? Does it mean that intermediate versions install routines that are either required for the next version OR do they install routines to ensure that there is no downgrade...
  22. A

    New Hikvision NVR DS-7608NI-I2

    Are you having the same firmware 3.4.62 as Dutchie?
  23. A

    New Hikvision NVR DS-7608NI-I2

    @Dutchie Thanks for the screen shots
  24. A

    New Hikvision NVR DS-7608NI-I2

    @Dutchie. Thanks for the screenshots. According to the first shot, TLS is not supported at this firmware version. According to the second shot, ssh access is supported. Check under network for the virtual host.
  25. A

    GMAIL Failure? Anyone Else?

    Although you are right above, can you suggest another camera/NVR brand of similar value for money as HIK, that provides better support? This is not a theoretical question, it is an honest question in my quest for proper support.
  26. A

    GMAIL Failure? Anyone Else?

    Yandex and gmail started working again!!!
  27. A

    DS-2CD2032F: E-mail Suddenly Stopped Working

    Yandex and gmail started working again!!!!
  28. A

    New Hikvision NVR DS-7608NI-I2

    I am very interested for the following 1. if it supports TLS encryption at the email notifications 2. if they have introduced a time scheduled rebooting of the NVR, 3. if the virtual hosting is supported, 4. if telnet access is supported.
  29. A

    GMAIL Failure? Anyone Else?

    Camera 2cd2332 is an R0 platform camera and they have indeed released a 5.4.0 firmware for the whole R0 line of cameras (and other Rxxx platform cameras). Beware that the firmware versions 5.4.0 are different between the various Rxx cameras. They all have the same number but the content of the...
  30. A

    New Hikvision NVR DS-7608NI-I2

    @Dutchie30 Can you please confirm if your NVR can email motion alerts through gmail? i.e. does it support TLS encryption? What firmware do you have? Can you provide screen shots of the firmware menus?